Partios Wholesale catalogue

Reinhoch Distributor | Parts

Tie rod end (837) · Engine mount (745) · Wheel suspension track control arm, front (506) · Stabilizer link (454) · Front track control arm silent block (359) · Center link (356) · Stabilizer bar bushing (333) · Tie rod (with no end) (234) · 71 further part types (1,724)

5,749 current catalogue lines

About the REINHOCH range

Reinhoch spans several vehicle systems in the Partios catalogue: 5,749 lines across 79 part types, with no single area dominating. The largest groups are tie rod end (837), engine mount (745), wheel suspension track control arm, front (506), stabilizer link (454) and front track control arm silent block (359). Beyond those, 2,291 lines are spread across 73 further part types. That tail includes stabilizer bar bushing, tie rod (with no end) and reaction bar. Buyers are typically workshops, motor factors and exporters; a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 5,749 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

REINHOCH Tie rod end RH52-A631

Tie rod end L (M24x1,5mm, L-265mm) fits: CASE IH 1170, 1190, 170, 150 CLAAS 506, 507, 540 RX, 540 RZ, 546, 546 RX, 546 RZ, 547, 547 ATX, 547 ATZ, 550 RX, 550 RZ, 556, 556 RX, 556 RZ, 557, 557 ATX

View part

REINHOCH Tie rod end RH52-A636

Tie rod end L/R (M22x1,5mm, L-183mm) fits: CASE IH 244, 2856, 644, 743, 743 XL, 744, 745 S, 745 XL, 844, 844 S, 844 XL, 845, 845 XL, 856, 856 XL, 48, 48 A, 52 2WD, 52 4WD, 58, 58 A, 63 2WD, 63 4WD

View part

REINHOCH Tie rod end RH52-A637

Tie rod end L/R (M24x1,5mm, L-280mm) fits: CASE IH 130, 150 CASE-STEYR 9105, 9105 A, 9115, 9115 A, 9125, 9125 A, 9145, 9145 A JOHN DEERE 300, 330

View part

REINHOCH Tie rod end RH52-A638

Tie rod end L/R (M24x1,5mm, L-280mm) fits: CASE IH 130, 150 CASE-STEYR 9125, 9125 A, 9145, 9145 A JOHN DEERE 300, 330

View part

REINHOCH Tie rod end RH52-A639

Tie rod end L/R (M18x1,5mm, L-143mm) fits: CASE-STEYR CVT 9000, CVT 9100

View part

REINHOCH Tie rod end RH52-A640

Tie rod end L/R (M22x1,5mm, L-271mm) fits: DEUTZ FAHR DX 6.06, DX 6.16, 4.61, 4.68, 4.71, 4.78, 6.08, 6.11, 6.21, 6.28, 6.31, 6.38, 6.61

View part

REINHOCH Tie rod end RH52-A642

Tie rod end L/R (M24x1,5mm, L-258mm) fits: JOHN DEERE 310 LANDINI 12500, 14500, 16500, 17500, 19000 MASSEY FERGUSON 180, 210, 220, 240, 250, 270, 290, 350, 355, 360, 364, 3095, 3120, 3125

View part

REINHOCH Tie rod end RH52-A643

Tie rod end R (M22x1,5mm, L-209mm) fits: RENAULT 310, 320, 330, 340, 65, 70 2WD, 70 4WD, 70 X, 75, 75 X, 85, 85 X, 95 2WD, 95 4WD, 95 X, 330 2WD, 330 4WD, 340 2WD, 340 4WD, 350 VALMET 505, 605

View part

REINHOCH Tie rod end RH52-A645

Tie rod end L/R (M22x1,5mm, L-160mm) fits: MASSEY FERGUSON 4435, 4445, 4455 VALMET 205, 255, 305, 355, 365, 405, 415, 455, 465, 555, 600, 665, 700, 800, 865, 900

View part

REINHOCH Tie rod end RH52-A646

Tie rod end (L-235mm) fits: VALMET 205, 255, 305, 355, 365, 405, 415, 415 M, 455, 465, 555, 565, 665, 865

View part

REINHOCH Tie rod end RH52-A647

Tie rod end L/R (M22x1,5mm, L-295mm) fits: VALMET 6000, 6100, 6200, 6250, 6250 HI, 6300, 6350, 6350 HI, 6400, 6550 HI, 6600, 6650 HI, 6800, 6850 HI, 6900, 8000, 8050, 8050 HI, 8100, 8150, 8150 HI

View part

REINHOCH Tie rod end RH52-A648

Tie rod end L/R (M18x1,5mm, L-294mm) fits: VALMET 205, 255, 305, 355, 365, 365 FOR, 365 OC, 365 S, 405, 415, 415 M, 455, 465, 465 FOR, 465 OC, 465 S, 555, 565, 565 FOR, 565 OC, 665, 665 FOR

View part

REINHOCH Tie rod end RH52-A649

Tie rod end L/R (M22x1,5mm, L-290mm) fits: VALMET 6000, 6100, 6200, 6250 HI, 6300, 6350 HI, 6400, 6550 HI, 6600, 6650 HI, 6750 HI, 6800, 6800 E, 6850 HI, 6900, 8000, 8000 LS, 8050, 8050 HI

View part

REINHOCH Tie rod end RH52-A653

Tie rod end fits: VOLVO BL60, BL60B, BL61, BL61 PLUS, BL61B

View part

REINHOCH Tie rod end RH52-A654

Tie rod end R (M24x1,5mm, L-263mm) fits: CASE IH 100, 110, 120, 130, 150, 1170, 1190, 1195, 175, 195, MC100, MC90, 100 C, 135, 170, 80 C, 90 C JOHN DEERE 310 LANDINI 12500, 14500, 16500, 17500

View part

REINHOCH Tie rod end RH52-A655

Tie rod end L/R (M18x1,5mm, L-278mm) fits: CASE IH 570 MXT, 580 M, 580 SM, 580 SR, 585 G, 586 G, 588 G, 590 SM, 590 SR LANDINI 100, 105, 105 TIER 2, 110, 115, 115 TDI, 115 TIER 2, 100 T, 100 TP

View part

REINHOCH Tie rod end RH52-A656

Tie rod end L/R (M18x1,5mm, L-330mm) fits: ZETOR 3340, 3341, 4340, 4341, 5340, 6340, 6341, 7340, 7341

View part

REINHOCH Tie rod end RH52-A657

Tie rod end L/R (M18x1,5mm, L-330mm) fits: ZETOR 3340, 3341, 4340, 4341, 5340, 6340, 6341, 7340, 7341

View part

REINHOCH Tie rod end RH52-A658

Tie rod end L/R (M18x1,5mm, L-318mm) fits: ZETOR 10540, 10641, 11641, 7540, 7540 E, 8540, 8540 E, 8641, 9540, 9641, 11441, 11741.4C, 12441 CASE IH 580 NEW HOLLAND FB100.2, FB110.2, LB110, LB75

View part

REINHOCH Tie rod end RH52-A663

Tie rod end L/R (M22x1,5mm, L-260mm) fits: VALMET 6000, 6100, 6200, 6250, 6250 HI, 6300, 6350, 6350 HI, 6400, 6550 HI, 6600, 6650 HI, 6750 HI, 6800, 6800 E, 6850 HI, 6900, 8000, 8000 LS, 8050

View part

REINHOCH Tie rod end RH52-A664

Tie rod end L/R (M45x2mm, L-225mm) fits: JOHN DEERE 320, 330, 430, 420, 520, 530, 810, 820, 8020, 8120, 8220, 8225 R, 8230, 8235 R, 8245 R, 8260 R, 8270 R, 8285 R, 8295 R, 8310, 8310 R, 8320

View part

REINHOCH Tie rod end RH52-A665

Tie rod end L (M28x1,5mm, L-310mm) fits: FORD 8530, 8630, 8730, 8830 JOHN DEERE 3215, 3220, 3415, 3420 NEW HOLLAND 8530, 8630, 8730, 8830, TW 25, TW 35

View part

REINHOCH Tie rod end RH52-A666

Tie rod end R (M28x1,5mm, L-310mm) fits: FORD 8530, 8630, 8730, 8830 JOHN DEERE 3215, 3220, 3415, 3420 NEW HOLLAND 8530, 8630, 8730, 8830, TW 25, TW 35

View part

REINHOCH Tie rod end RH52-A667

Tie rod end L/R (M18x1,5mm, L-100mm) fits: MASSEY FERGUSON 354, 365, 374, 394

View part

REINHOCH Tie rod end RH52-A669

Tie rod end L/R (1 1/4inch-12UNF, L-255mm) fits: JOHN DEERE 7210, 7510, 7610, 7710, 7720, 7730, 7810, 7815, 7820, 7830, 7920, 7930

View part

REINHOCH Tie rod end RH52-A670

Tie rod end L/R (1 1/4inch-12, L-255mm) fits: JOHN DEERE 210, 420, 510, 630, 6140 J, 710, 720, 730, 7210, 7510, 7610, 7710, 7715, 7720, 7730, 7810, 7815, 7820, 7830, 7920, 7930

View part

REINHOCH Tie rod end RH52-A671

Tie rod end R (L-322mm) fits: JOHN DEERE 1640, 1830, 1840, 200, 210, 240, 250, 2030, 2040, 2040S, 2130, 2140, 2250, 2450, 2650, 2850, 3030, 3120, 3130

View part

REINHOCH Tie rod end RH52-A674

Tie rod end L/R (M22x1,5mm, L-390mm) fits: FENDT 309 C TURBO FARMER, 309 CA FARMER, 309 CI FARMER, 309 FARMER, 309 LS FARMER, 309 LSA FARMER, 309 S FARMER, 309 VARIO, 309 VARIO 2WD, 309 VARIO 4WD

View part

REINHOCH Tie rod end RH52-A675

Tie rod end L/R (M26x1,5mm, L-395mm) fits: FENDT 711 FAVORIT, 711 VARIO, 711 VARIO FAVORIT, 712 FAVORIT, 712 VARIO, 712 VARIO FAVORIT, 712 VARIO SERIA I, 712 VARIO SERIA II, 714 FAVORIT, 714 VARIO

View part

REINHOCH Tie rod end RH52-A676

Tie rod end L/R (M28x1,5mm, L-350mm) fits: FENDT 816 FAVORIT, 818 FAVORIT, 822 FAVORIT, 824 FAVORIT, 916 FAVORIT, 918 VARIO, 920 FAVORIT, 924 FAVORIT, 926 FAVORIT, 930 VARIO

View part

REINHOCH Tie rod end RH52-A677

Tie rod end L/R (M24x1,5mm, L-85mm) fits: FENDT 206 S FARMER, 207 S FARMER, 208 P FARMER, 208 PA FARMER, 209 S FARMER

View part

REINHOCH Tie rod end RH52-A678

Tie rod end L/R (M24x1,5mm, L-85mm) fits: FENDT 206 S FARMER, 207 S FARMER, 208 P FARMER, 208 PA FARMER, 209 S FARMER

View part

REINHOCH Tie rod end RH52-A679

Tie rod end L/R (M26x1,5mm, L-395mm) fits: FENDT 711 FAVORIT, 712 FAVORIT, 714 FAVORIT, 716 VARIO, 718 VARIO, 815 VARIO TMS, 817 VARIO TMS, 818 FAVORIT, 820 VARIO

View part

REINHOCH Tie rod end RH52-A680

Tie rod end L/R (M20x1,5mm, L-72mm) fits: FENDT 250 S FARMER, 250 SA FARMER, 250 V FARMER, 250 VA FARMER, 260 P FARMER, 260 PA FARMER, 260 S FARMER, 260 SA FARMER, 260 V FARMER, 260 VA FARMER

View part

REINHOCH Tie rod end RH52-A681

Tie rod end R (M22x1,5mm, L-77mm) fits: FENDT 250 S FARMER, 250 SA FARMER, 250 V FARMER, 250 VA FARMER, 260 P FARMER, 260 PA FARMER, 260 S FARMER, 260 SA FARMER, 260 V FARMER, 260 VA FARMER

View part

REINHOCH Tie rod end RH52-A682

Tie rod end L (M22x1,5mm, L-77mm) fits: FENDT 250 S FARMER, 250 SA FARMER, 250 V FARMER, 250 VA FARMER, 260 P FARMER, 260 PA FARMER, 260 S FARMER, 260 SA FARMER, 260 V FARMER, 260 VA FARMER

View part

REINHOCH Tie rod end RH52-A683

Tie rod end L/R (M20x1,5mm, L-52mm) fits: FENDT 300 FARMER, 303 FARMER, 312 VARIO

View part

REINHOCH Tie rod end RH52-A684

Tie rod end L/R (M20x1,5mm, L-82mm) fits: FENDT 303 FARMER, 304 S FARMER, 305 S FARMER, 306 S FARMER, 307 C FARMER, 308 C FARMER, 308 S FARMER

View part

REINHOCH Tie rod end RH52-A685

Tie rod end L/R (M28x1,5mm, L-215mm) fits: JCB 526, 528, 530, 533, 535, 537, 540

View part

REINHOCH Tie rod end RH52-A686

Tie rod end L/R (L-101mm) fits: LANDINI 16500, 16550, 17500, 17550, 19500, 4560 V, 55 GT, 530 F, 530 L, 530 V, 560 F, 560 L, 560 V, 5500, 5830, 5840, 5860, 5870, 60 GT, 65 GT, 630 L, 6030, 6040

View part

REINHOCH Tie rod end RH52-A687

Tie rod end L/R (M24x1,5mm, L-90mm) fits: JOHN DEERE 1055, 1065, 1068H, 1072, 1075, 1085, 1166, 1174, 1177, 1188, 2054, 2056, 2058, 2254, 2256, 2258, 955, 965H, 968H, 975, 985

View part

REINHOCH Tie rod end RH52-A688

Tie rod end L/R (M22x1,5mm, L-340mm) fits: FENDT 307 A FARMER, 307 C FARMER, 307 C TURBO FARMER, 307 CA FARMER, 307 CI FARMER 2WD, 307 CI FARMER 4WD, 307 LS FARMER, 307 LSA FARMER, 307 LSE FARMER

View part

REINHOCH Tie rod end RH52-A690

Tie rod end L/R (M24x1,5mm/M24x1,5mm, L-235/420mm) fits: MANITOU

View part

REINHOCH Tie rod end RH52-A692

Tie rod end L/R (M22x1,5mm, L-305mm) fits: MERLO P 120.10 HM, P 20.6 SC, P 26,6, P 27.10, P 30.7, P 32.12 EVS, P 32.6 PLUS, P 35.13 K, P 38.13, P 38.13 PLUS, P 40.17

View part

REINHOCH Tie rod end RH52-A693

Tie rod end L/R (M22x1,5mm, L-240mm) fits: MERLO P 30.7

View part

REINHOCH Center link RH52-A695

Longitudinal steering rod (L-360mm) fits: JCB 3CX, 3CX SITEMASTER, 3CX-2, 3CX-4, 3CXC, 3CXS, 3CXT, 4CX, 4CXC

View part

REINHOCH Tie rod end RH52-A697

Tie rod end L/R (M24x1,5mm, L-270mm) fits: MASSEY FERGUSON 105, 140 (3 CYL), 140 SUPER (3 CYL), 155, 165, 180, 640, 685, 699, 6485, 6490, 6495, 6497, 6499 (PERKINS 6 CYL), 6499 (SISU 74 CTA 6 CYL)

View part

REINHOCH Tie rod end RH52-A698

Tie rod end L/R (M18x1,5mm, L-180mm) fits: MASSEY FERGUSON 354, 364, 374, 394

View part

Buying with Partios

Buying REINHOCH parts through Partios

Are these genuine REINHOCH parts?

Yes. Every REINHOCH line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source REINHOCH parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for REINHOCH lines that aren't currently available.

Do you supply REINHOCH parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on REINHOCH parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a REINHOCH order?

It depends on the line. Stocked REINHOCH items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for REINHOCH parts?

No. There's no minimum order value or quantity on a Partios trade account. Some REINHOCH lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account