Partios Wholesale catalogue
Peters Distributor | Parts
Pneumatic hose connector (495) · Side mirror (494) · Bolts, nuts and pins (368) · Air suspension bellows (335) · Center link (302) · TEKALAN hose coupler (294) · Air tank (260) · Hub seal (226) · 514 further part types (10,124)
13,489 current catalogue lines
About the PETERS range
The Peters range at Partios is broad rather than specialised. It has 13,489 lines spanning 522 part types across several vehicle systems. The largest groups are pneumatic hose connector (495), side mirror (494), bolts, nuts and pins (368), air suspension bellows (335) and center link (302). They account for only 18% of the range, though. The other 10,610 lines sit across 516 further part types, which is what makes this a range to search rather than browse. That tail includes air tank, hub seal and side mirror glass. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 13,489 lines, is normally bought on fitment coverage rather than on any one part number.
Catalogue products
Vehicle references are indicative — confirm against the article number.
PETERS Oil sump gasket 120.870-00A
Oil sump gasket fits: SCANIA G I, G II, INTERLINK, IRIZAR CENTURY, IRIZAR PB, K I, OMNIEXPRESS, P I, P II, R I, R II, S, TOURING VAN HOOL TX DC13.05-OC13.101 04.04-
View partPETERS Sump drain hole bolt 120.890-00A
Oil sump drain bolt M24x2 fits: SCANIA 3, 3 BUS, 4, 4 BUS, F, G I, G II, K I, N BUS, P I, P II, R I, R II, S, T DC07.101-OC9.G05 05.87-
View partPETERS Steering knuckle repair kit 121.000-00A
King pin set (set per 1 wheel, no bearing, with pivot 44,4mmx228mm) fits: SCANIA
View partPETERS Steering knuckle repair kit 121.001-00A
PE zestaw naprawczy zwrotnicy b.łożysk 44.5x36x215 SCANIA AM55 112,142
View partPETERS Steering knuckle repair kit 121.003-00A
Zestaw naprawczy zwrotnicy (na 1 koło, bez łożyska, sworzeń śr.40/44,5x216mm) SCANIA 3 01.88-12.96
View partPETERS Hub seal 121.003-03A
View partPETERS Steering knuckle repair kit 121.003-10A
PE crossover repair kit (with bearing) 44.4x53x215 SCANIA
View partPETERS Steering knuckle repair kit 121.004-00A
King pin set (40mmx224mm) fits: SCANIA 4, G I, P I, R I 05.96-05.19
View partPETERS Steering knuckle repair kit 121.004-10A
PE repair kit sw.zwrotnicy 55x223mm SCANIA 113 / 4,124,144 (NO BEARINGS)
View partPETERS Steering knuckle repair kit 121.005-00A
King pin set (40mmx224mm) fits: SCANIA 4, G I, P I, R I 05.96-05.19
View partPETERS Steering knuckle repair kit 121.005-10A
PE zestaw naprawczy sw.zwrotnicy 55x223mm SCANIA 113/4,124,144(BEZ ŁOŻYSK)
View partPETERS Steering knuckle repair kit 121.006-00
King pin set (set per 1 wheel, with pivot 40/45mm/45mmx224mm) fits: SCANIA 4, 4 BUS, F, G I, K I, N BUS, P I, R I, T 05.95-
View partPETERS Steering knuckle repair kit 121.007-00A
King pin set (set per 1 wheel, with bearing, with pivot) fits: SCANIA
View partPETERS Input shaft nut 121.020-00A
Ring gear nut (M44x1,5) fits: SCANIA 3, 3 BUS, 4, 4 BUS, G I 05.87-05.19
View partPETERS Tie rod end 122.000-00A
PE rod tip P (M30x1, 5 pin M24x1, 5) MAN 16281-26281, DB
View partPETERS Tie rod end 122.001-00
EP end cross bar (M30x1, 5 pin M24x1, 5), DBs, SCANIA, MAN, VOLVO
View partPETERS Tie rod end 122.002-00
Tie rod end (thread type inner, M26x1,5mm/M24x1,5mm, L-90mm) fits: IVECO EUROMOVER, EUROSTAR, EUROTECH MP, S-WAY MAN E2000, F2000, HOCL, LION ́S CITY, NL, NÜ, TGA MERCEDES INTEGRO (O 550) 01.92-
View partPETERS Tie rod end 122.003-00
Tie rod end (thread type external, M30x1,5mm/M24x1,5mm, L-150mm) fits: DAF CF 85, XF 105 MAN HOCL, LION ́S CITY, M 2000 L, M 2000 M, NG, NL, NÜ, TGA SCANIA G I, P I, R I, T 08.92-
View partPETERS Center link 122.004-00A
PE longitudinal steering rack (dł.893mm) SCANIA 93,113,143
View partPETERS Center link 122.005-00A
Longitudinal steering rod (L-920mm)
View partPETERS Center link 122.007-00A
Longitudinal steering rod (L-785mm)
View partPETERS Center link 122.008-00A
Longitudinal steering rod (L-1060mm) fits: SCANIA 4, G I 05.96-05.19
View partPETERS Center link 122.009-00
Longitudinal steering rod (L-1920mm) fits: SCANIA 4, G I, P I, R I 01.96-05.19
View partPETERS Center link 122.011-00A
PE drążek kierowniczy poprzeczny (dł.1730mm) SCANIA "4"
View partPETERS Center link 122.015-00A
Longitudinal steering rod (L-443mm) fits: SCANIA 4, G I, P I, R I 05.96-05.19
View partPETERS Center link 122.016-00A
Longitudinal steering rod (L-1053mm) fits: SCANIA 4, G I, P I, R I 05.96-05.19
View partPETERS Cross rod 122.017-00A
Cross rod (L-1743mm) fits: SCANIA 4, 4 BUS, G I, P I, R I, T 05.95-05.19
View partPETERS Center link 122.018-00A
PE longitudinal steering rack (dł.890mm) SCANIA 112.142 / 3
View partPETERS Center link 122.019-00A
steering rack PE 113.143 SCANIA longitudinal (axis AM56/61, AM800/20) (dł.855mm)
View partPETERS Center link 122.020-00A
PE elongated rod length = 573mm SCANIA 92 / 3,113,143 (axis AM56/61)
View partPETERS Center link 122.021-00A
PE longitudinal steering rack SCANIA 111 (dł.680mm)
View partPETERS Center link 122.022-00A
PE longitudinal steering rack (dł.761mm) SCANIA 92,112,142
View partPETERS Center link 122.023-00A
Longitudinal steering rod (L-601mm) fits: SCANIA 4, G I, P I, R I 11.95-05.19
View partPETERS Center link 122.024-00A
PE longitudinal steering rack (dł.927mm) SCANIA 93
View partPETERS Center link 122.025-00
Longitudinal steering rod (L-1272mm) fits: SCANIA 3 BUS, 4 BUS, F, K I, N BUS 07.93-
View partPETERS Center link 122.026-00A
PE elongated steering rack SCANIA 3
View partPETERS Center link 122.027-00A
PE longitudinal steering rack SCANIA 93,113,143 (AM56/61/70 dł.905/947mm)
View partPETERS Tie rod end 122.028-00A
Tie rod end (thread type external direction right-sided, M24x1,5mm/M30x1,5mm, L-150mm) fits: DAF LF 55 MAN TGA, TGM I, TGS I, TGX I RVI MAGNUM, PREMIUM, PREMIUM 2 SCANIA 4, K I 05.95-
View partPETERS Cross rod 122.029-00A
Cross rod (L-1736mm) fits: SCANIA 4, G I, P I, R I 05.96-05.19
View partPETERS Tie rod end 122.031-00A
Tie rod end (thread type external direction right-sided, M30x1,5mmx1,5mm, L-140mm) fits: DAF 95 XF, CF 75, CF 85, XF 105, XF 95 MAN E2000, F2000, F90, L2000, M 2000 L, M 2000 M, TGA, TGM I 08.86-
View partPETERS Tie rod end 122.032-00A
Końcówka drążka kierowniczego (gw.wew.M26x1,5 PG. L-115mm) SCANIA 4, P, G, R, T 11.95-
View partPETERS Tie rod end 122.033-00A
Tie rod end (thread type inner x1,5mmx1,5mm, L-80mm) fits: DAF CF 65, CF 75, CF 85, XF 105, XF 95 IVECO EUROSTAR, EUROTECH MH, EUROTECH MP, EUROTECH MT, EUROTRAKKER, STRALIS I, S-WAY 10.82-
View partPETERS Tie rod end 122.034-00
Tie rod end (thread type inner, M26x1,5mm/M24x1,5mm, L-75mm) fits: IVECO EUROMOVER, EUROSTAR, STRALIS I, STRALIS II, S-WAY MAN CLA, E2000, F2000, F90, HOCL, LION ́S CITY, LION ́S COACH, NL 07.82-
View partPETERS Center link 122.035-00A
Longitudinal steering rod (L-495mm) fits: SCANIA 4, G I, P I, R I 01.96-05.19
View partPETERS Center link 122.036-00A
Longitudinal steering rod (L-435mm) fits: SCANIA 4, G I, P I, R I 11.95-05.19
View partPETERS Center link 122.037-00A
Longitudinal steering rod (L-2783mm) fits: SCANIA 4, R I 05.96-05.19
View partPETERS Center link 122.038-00
Longitudinal steering rod (L-2783mm) fits: SCANIA 4, G I, R I 01.00-05.19
View partPETERS Cross rod 122.039-00A
Cross rod (L-1743mm) fits: SCANIA G I, K I, P I, R I, T 01.03-
View partBuying with Partios
Buying PETERS parts through Partios
Are these genuine PETERS parts?
- Yes. Every PETERS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source PETERS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for PETERS lines that aren't currently available.
Do you supply PETERS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on PETERS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a PETERS order?
- It depends on the line. Stocked PETERS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for PETERS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some PETERS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account