Partios Wholesale catalogue

Peters Distributor | Parts

Pneumatic hose connector (495) · Side mirror (494) · Bolts, nuts and pins (368) · Air suspension bellows (335) · Center link (302) · TEKALAN hose coupler (294) · Air tank (260) · Hub seal (226) · 514 further part types (10,124)

13,489 current catalogue lines

About the PETERS range

The Peters range at Partios is broad rather than specialised. It has 13,489 lines spanning 522 part types across several vehicle systems. The largest groups are pneumatic hose connector (495), side mirror (494), bolts, nuts and pins (368), air suspension bellows (335) and center link (302). They account for only 18% of the range, though. The other 10,610 lines sit across 516 further part types, which is what makes this a range to search rather than browse. That tail includes air tank, hub seal and side mirror glass. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 13,489 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

PETERS Heater valve 100.591-00

Heater valve fits: DAF CF 1DB2022-1NA06-PX-7239 05.13-

View part

PETERS Steering gear combined switch-key 100.593-00A

Combined switch under the steering wheel

View part

PETERS Windscreen wiper mechanism 100.594-00

Windscreen wiper mechanism (without motor) fits: DAF 95 XF, XF 105, XF 95 01.97-

View part

PETERS Wiper motor 100.595-00A

Wiper motor front fits: DAF CF 65, CF 75, CF 85 CE136C-XF355M 01.01-12.20

View part

PETERS Oil sump 100.800-00A

Oil sump (plastic)

View part

PETERS Oil sump gasket 100.820-00A

Oil sump gasket fits: DAF CF, XF 106, XF II, XFC, XG, XG+ IRIZAR I3, I4, I6, I8 TATRA PHOENIX VAN HOOL EX, TX VDL FUTURA MX-11320-MX375 05.10-

View part

PETERS Steering knuckle silent block 101.003-00

Knuckle silentblock (31,5mm/50mmx60mm) fits: DAF 65 CF, 75 CF, 85 CF, 95 XF 01.97-09.02

View part

PETERS Steering knuckle repair kit 101.004-00A

PE DAF crossover repair kit

View part

PETERS Driver’s cab suspension metal sleeve 101.015-00A

PE bearing 50x58x25 DAF

View part

PETERS Steering knuckle seal 101.017-00A

EP O-ring 50x58x4 DAF

View part

PETERS Steering knuckle repair kit 101.024-00A

EP kingpin repair kit (for 1 page) DAF 1600.2100 / 5.2300 / 5.2500 / 5.3300 / 5

View part

PETERS Steering knuckle repair kit 101.024-10

King pin set (set per 1 wheel, with pivot M27 31,5/50mm/50mmx269mm) fits: DAF F 2100, F 2300, F 2500, F 2700, F 2800, F 2900, F 3200, F 3300, F 3600, N 2800, SB 01.74-

View part

PETERS Steering knuckle seal 101.029-00A

View part

PETERS Steering knuckle repair kit 101.030-00A

King pin set (M27 31,5mmx272mm) fits: DAF 65 CF, 75 CF, 85 CF, 95 XF 01.97-09.02

View part

PETERS Steering knuckle repair kit 101.031-00A

King pin set (M27 31,5mmx254mm) fits: DAF 65 CF, 75 CF, 85 CF, 95 XF, CF, CF 65, CF 75, CF 85, LF 45, LF 55, XF 105, XF 106, XF 95 01.97-

View part

PETERS Steering knuckle repair kit 101.032-00

King pin set (set per 1 wheel, with pivot 32mm/40mmx172mm) fits: DAF LF 45 01.01-

View part

PETERS Steering knuckle repair kit 101.033-20

King pin set (cover, set per 2 wheels, with pivot 32mm/40mmx172mm) fits: DAF LF 45 01.01-

View part

PETERS Steering knuckle repair kit 101.034-00A

King pin set (set per 1 wheel, with bearing, with pivot 35mm/35mmx206mm) fits: DAF

View part

PETERS Tie rod end 102.001-00A

EP tip rod hearts [LG] DAF 1600,2000,2100,2200,2300,2500,2800,3300,3600

View part

PETERS Tie rod end 102.002-00A

EP tip rod hearts [PG] DAF 1600,2000,2100,2200,2300,2500,2800,3300,3600

View part

PETERS Tie rod end 102.003-00.

PE ball joint LG (M30x1, 5 pin M24x1, 5) SCANIA

View part

PETERS Tie rod end 102.005-00A

Tie rod end (thread type inner, M48x1,5mm, L-140mm) fits: DAF 95 XF 01.97-09.02

View part

PETERS Tie rod end 102.006-00A

Tie rod end (thread type inner, M48x1,5mmx1,5mm, L-133mm) fits: DAF 95 XF 01.97-09.02

View part

PETERS Tie rod end 102.007-00A

Tie rod end (thread type external, M30x1,5mm/M20x1,5mm, L-120mm) fits: DAF 65 CF, 75, 75 CF, 85, 85 CF, 95 XF, CF 65, CF 75, CF 85, F 1100, F 1300, F 1500, F 1700, F 1900, LF 45, LF 55 01.59-

View part

PETERS Center link 102.009-00A

Longitudinal steering rod (L-850mm)

View part

PETERS Center link 102.010-00A

Longitudinal steering rod (L-880mm) fits: DAF 65 CF, 75 CF, 85 CF 02.98-12.00

View part

PETERS Center link 102.011-00A

Longitudinal steering rod (L-1005mm) fits: DAF 75 CF, 85 CF, 95 XF, XF 95 01.97-12.06

View part

PETERS Center link 102.012-00A

Longitudinal steering rod (L-1015mm)

View part

PETERS Cross rod 102.014-00A

Cross rod (L-1690mm) fits: DAF CF 65, CF 75, CF 85, XF 105, XF 95 01.01-

View part

PETERS Cross rod 102.015-00

Cross rod (L-1734mm) fits: DAF CF 65, CF 75, CF 85, XF 105 01.01-

View part

PETERS Cross rod 102.016-00A

Cross rod (L-1530mm) fits: DAF 85 CF, 95 XF, CF 75, CF 85, XF 105, XF 95 01.97-

View part

PETERS Center link 102.017-00

Longitudinal steering rod (L-1952mm) fits: DAF XF 105, XF 95 09.02-

View part

PETERS Center link 102.018-00

Longitudinal steering rod (L-850mm) fits: DAF 85, 95 XF, CF 75, CF 85, XF 105, XF 95 07.92-

View part

PETERS Center link 102.019-00A

Longitudinal steering rod (L-590mm) fits: DAF CF 75, CF 85, XF 105, XF 95 01.01-

View part

PETERS Center link 102.020-00A

Longitudinal steering rod (L-865mm) fits: DAF CF 65, CF 75, CF 85 01.01-12.20

View part

PETERS Center link 102.022-00A

Longitudinal steering rod (L-991mm) fits: DAF CF 85, XF 105, XF 95 01.01-

View part

PETERS Center link 102.026-00A

Longitudinal steering rod (L-919mm) fits: DAF LF 55 01.01-

View part

PETERS Stabilizer link 102.027-00A

Stabilizer link (L-2028mm, cone size: 30mm)

View part

PETERS Cross rod 102.028-00A

Cross rod (L-1640mm) fits: DAF LF 45 01.01-

View part

PETERS Tie rod end 102.029-00

Tie rod end (thread type external, M18x1,5mm/M30x1,5mm, L-120mm) fits: DAF LF 45 01.01-

View part

PETERS Tie rod end 102.030-00

Tie rod end (thread type inner, M24x1,5mm/M24x1,5mm, L-120mm) fits: DAF CF 75, CF 85, XF 105, XF 95 01.01-

View part

PETERS Tie rod end 102.031-00

Tie rod end (thread type inner, M22x1,5mm/M24x1,5mm, L-95mm) fits: DAF 85, CF 75, CF 85, XF 105, XF 106, XF 95 07.92-

View part

PETERS Center link 102.032-00

Longitudinal steering rod (L-860mm) fits: DAF CF 75, CF 85, XF 95 01.01-05.13

View part

PETERS Center link 102.033-00

Longitudinal steering rod (L-909mm) fits: DAF LF 55 01.01-

View part

PETERS Center link 102.034-00A

Longitudinal steering rod (L-895,5mm)

View part

PETERS Center link 102.035-00A

Longitudinal steering rod (L-1980mm)

View part

PETERS Tie rod end 102.109-00A

Tie rod end (thread type external, M28x1,5mm/M18x1,5mm, L-110mm) fits: DAF F 1100 IVECO MK, P/PA-HAUBENFAHRZEUGE, ZETA MAN TGL I MERCEDES ACTROS MP4 / MP5, LK/LN2, OF, VARIO, VARIO (B667 03.75-

View part

PETERS Tie rod end 102.110-00

Tie rod end (thread type external, M28x1,5mm/M18x1,5mm, L-105mm) fits: DAF CF 65, F 1100 IVECO MK, ZETA MAN FOC, L2000, M 2000 L, TGL I, TGL II, TGM I MERCEDES ACTROS MP4 / MP5, LK/LN2 08.73-

View part

Buying with Partios

Buying PETERS parts through Partios

Are these genuine PETERS parts?

Yes. Every PETERS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source PETERS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for PETERS lines that aren't currently available.

Do you supply PETERS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on PETERS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a PETERS order?

It depends on the line. Stocked PETERS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for PETERS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some PETERS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account