Partios Wholesale catalogue

Peters Distributor | Parts

Pneumatic hose connector (495) · Side mirror (494) · Bolts, nuts and pins (368) · Air suspension bellows (335) · Center link (302) · TEKALAN hose coupler (294) · Air tank (260) · Hub seal (226) · 514 further part types (10,124)

13,494 current catalogue lines

About the PETERS range

The Peters range at Partios is broad rather than specialised. It has 13,494 lines spanning 522 part types across several vehicle systems. The largest groups are pneumatic hose connector (495), side mirror (494), bolts, nuts and pins (368), air suspension bellows (335) and center link (302). They account for only 18% of the range, though. The other 10,610 lines sit across 516 further part types, which is what makes this a range to search rather than browse. That tail includes air tank, hub seal and side mirror glass. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 13,494 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

PETERS Harness wire 020.680-00A

Harness wire for injectors (85 160 175 1070mm, 12 pin) fits: IVECO

View part

PETERS Harness wire 020.681-00A

Harness wire of injectors (60 105 150 175 1045mm, 10 pin) fits: IVECO

View part

PETERS Harness wire 020.682-00A

Harness wire of injectors (80 85 160 175 1070mm, 10 pin) fits: IVECO

View part

PETERS Harness wire 020.683-00A

Harness wire of injectors

View part

PETERS Oil sump 020.800-00A

Oil sump (steel)

View part

PETERS Oil sump gasket 020.820-00A

Oil sump gasket fits: FUSO (MITSUBISHI) CANTER VII (FB7_, FE7_, FB8_, FE8_), CANTER VIII (FEA_, FEB_, FEC_, FGB_) MULTICAR FUMO, M31 TEMSA PRESTIJ 4P10-0AT2-F30DTE(F1CE3481N) 07.99-

View part

PETERS Steering knuckle repair kit 021.009-00A

Zestaw naprawczy zwrotnicy (kpl. na koło,43X53X227) IVECO EUROCARGO, EUROTECH, STRALIS, EUROTRAKKER

View part

PETERS Steering knuckle repair kit 021.010-00A

King pin set fits: IVECO

View part

PETERS Steering knuckle repair kit 021.011-00A

King pin set (35mm/43mmx199mm) fits: IVECO

View part

PETERS Steering knuckle repair kit 021.012-00A

King pin set (33mm/40mmx175mm) fits: IVECO

View part

PETERS Steering knuckle repair kit 021.013-00A

King pin set (50mmx118mm) fits: IVECO

View part

PETERS Steering knuckle repair kit 021.014-00A

King pin set fits: IVECO

View part

PETERS Steering knuckle repair kit 021.015-00

King pin set (set per 1 wheel, with pivot 43/53mm/53mmx224,5mm) fits: IVECO EUROCARGO I, EUROSTAR, EUROTECH MP, S-WAY 01.91-

View part

PETERS Steering knuckle repair kit 021.016-00

King pin set (set per 1 wheel, with pivot 35mm/43mmx199mm) fits: IVECO EUROCARGO I, EUROFIRE II, MAGIRUS 01.91-09.15

View part

PETERS Steering knuckle repair kit 021.017-00A

King pin set (set per 1 wheel, with pivot 41mm/50mmx280mm) fits: IVECO

View part

PETERS Steering knuckle repair kit 021.018-00

King pin set (set per 1 wheel, with pivot 41mm/51mmx278mm) fits: IVECO M, P/PA, P/PA-HAUBENFAHRZEUGE 07.83-12.93

View part

PETERS Steering knuckle repair kit 021.019-00

King pin set (set per 2 wheels, with pivot 28/35mm/35mmx178mm) fits: IVECO EUROCARGO I, MAGIRUS 01.91-09.15

View part

PETERS Steering knuckle repair kit 021.020-00A

King pin set fits: IVECO

View part

PETERS Tie rod end 021.050-00A

View part

PETERS Tie rod end 021.051-00A

View part

PETERS Wheel hub nut 021.100-00

Wheel hub nut (M82x1,5, wrench size 121mm, height 25mm) fits: IVECO EUROTECH MP, EUROTRAKKER, M, P/PA, P/PA-HAUBENFAHRZEUGE, TRAKKER I 07.83-

View part

PETERS Wheel hub nut 021.101-00A

Wheel hub nut rear (M52x1,5, wrench size 67mm, height 20mm wrench no. STR-KR72/12) fits: IVECO DAILY I, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI 01.78-

View part

PETERS Tie rod end 022.000-00

Tie rod end (thread type external, M30x1,5mm/M24x1,5mm, L-125mm) fits: IVECO EUROCARGO I, EUROSTAR, EUROTECH MH, EUROTECH MP, EUROTECH MT, EUROTRAKKER, M, STRALIS I, TRAKKER I, TURBOSTAR 07.84-

View part

PETERS Tie rod end 022.007-00A

Tie rod end (thread type external, M28x1,5mmx1,5mm, L-115mm) fits: DAF LF 45 IVECO M, ZETA 01.83-

View part

PETERS Gear shifter lever ball joint 022.009-00A

Gearshift control rod ball-and-socket joint

View part

PETERS Gear shifter lever ball joint 022.010-00A

Gearshift control rod ball-and-socket joint

View part

PETERS Gear shifter lever ball joint 022.011-00

Gearshift control rod ball-and-socket joint (external right-sided M16x1,5mm/M10x1,25mm L- 90mm) fits: IVECO EUROCARGO I, EUROFIRE II, EUROSTAR, EUROTECH MH, EUROTECH MP, EUROTECH MT 01.91-

View part

PETERS Tie rod end 022.012-00A

Tie rod end (thread type external, M28x1,5mmx1,5mm, L-115mm) fits: DAF LF 45 IVECO M, ZETA 01.83-

View part

PETERS Tie rod end 022.013-00

Tie rod end (thread type inner, M30x1,5mm/M30x1,5mm, L-86mm) fits: IVECO EUROTRAKKER, P/PA, STRALIS I, TRAKKER I RVI KERAX, MAXTER 03.89-

View part

PETERS Tie rod end 022.014-00

Tie rod end (thread type inner, M18x1,5mm/M18x1,5mm, L-28,5/95mm) fits: IVECO DAILY I, DAILY II 01.78-12.99

View part

PETERS Tie rod end 022.015-00

Tie rod end (thread type inner, M14x1,5mm, L-22,5/79mm) fits: IVECO DAILY I, DAILY II, DAILY IV, DAILY V 01.78-02.14

View part

PETERS Center link 022.016-00

Longitudinal steering rod (L-952mm) fits: IVECO EUROCARGO I, EUROTECH MH, EUROTECH MT, EUROTRAKKER 01.93-

View part

PETERS Cross rod 022.017-00

Cross rod (L-1315mm) fits: IVECO STRALIS I 06.03-

View part

PETERS Center link 022.018-00A

Longitudinal steering rod (L-892mm)

View part

PETERS Tie rod end 022.029-00A

Tie rod end (thread type external, M38x1,5mmx1,5mm, L-125mm) fits: IVECO TURBOTECH MAN F90, TGA MERCEDES NG, SK RVI MANAGER, MAXTER 08.73-

View part

PETERS Tie rod end 022.030-00A

Tie rod end (thread type external, M38x1,5mmx1,5mm, L-125mm) fits: IVECO TURBOTECH MAN TGA MERCEDES NG, SK RVI MANAGER, MAXTER 08.73-

View part

PETERS Tie rod end 022.032-00A

Tie Rod End PETERS M30x1, 5 / M20x1, 5 dł.120mm (right thread) IVECO

View part

PETERS Tie rod end 022.033-00A

Tie rod end (thread type external, M30x1,5mm/M20x1,5mm, L-120mm) fits: DAF 75, 75 CF, 85, 85 CF, 95 XF, CF 75, CF 85, XF 105, XF 95 IVECO EUROCARGO I, EUROFIRE II, MAGIRUS, MK 01.70-

View part

PETERS Center link 022.034-00A

PETERS 897mm steering rack IVECO

View part

PETERS Center link 022.035-00

Drążek kierowniczy wzdłużny (L-953mm) IVECO STRALIS, TRAKKER, EUROTRAKKER, EUROTECH 01.92-

View part

PETERS Tie rod (with end) 022.037-00A

Tie rod (with end) L length980mm fits: IVECO TURBOTECH 8210.42.101/8210.42.271 01.90-12.92

View part

PETERS Center link 022.040-00A

PETERS 822mm steering rack IVECO

View part

PETERS Center link 022.041-00A

PETERS 900mm steering rack IVECO

View part

PETERS Tie rod end 022.042-00A

Końcówka drążka kierowniczego L/P IVECO DAILY II 2.5/2.8 01/89-05/99

View part

PETERS Center link 022.043-00A

PETERS Tie Rod End / M20x1, 5 (new type) IVECO

View part

PETERS Center link 022.044-00A

EP 1490 mm Steering IVECO

View part

PETERS Center link 022.045-00A

Steering PE IVECO

View part

PETERS Cross rod 022.047-00A

Cross rod (L-1631mm)

View part

Buying with Partios

Buying PETERS parts through Partios

Are these genuine PETERS parts?

Yes. Every PETERS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source PETERS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for PETERS lines that aren't currently available.

Do you supply PETERS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on PETERS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a PETERS order?

It depends on the line. Stocked PETERS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for PETERS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some PETERS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account