Partios Wholesale catalogue

Pascal Distributor | Transmission & Driveline

Axle shaft (1,321) · Drive axle shaft core (1,119) · Driveshaft joint (946) · Axle rubber boot set (291) · Steering gear boot (186) · Drive shaft (78) · Joint repair kit (20) · Circlip (18) · 6 further part types (19)

3,982 current catalogue lines

About the PASCAL range

Partios carries 3,982 Pascal lines of transmission & driveline, spread across 14 part types. The largest groups are axle shaft (1,321), drive axle shaft core (1,119), driveshaft joint (946), axle rubber boot set (291) and steering gear boot (186). Those six account for most of the catalogue; the remaining 57 lines are spread across 8 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes joint repair kit, circlip and bellows band. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 3,982 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

PASCAL Drive axle shaft core #G2P062PC

Rdzeń Wał napędowy przód P 614mm pasuje do: PEUGEOT 3008 I, 308, 308 I, 5008 1.6D/2.0D 09.07-03.17

View part

PASCAL Axle shaft G2P063PC

Drive axle shaft front R 1130mm (new) fits: CITROEN JUMPER III PEUGEOT BOXER 2.0D 07.15-09.19

View part

PASCAL Drive axle shaft core #G2P063PC

Rdzeń Wał napędowy przód P 1130mm pasuje do: CITROEN JUMPER II PEUGEOT BOXER 2.0D 07.15-

View part

PASCAL Axle shaft G2P064PC

Drive axle shaft front L 834mm (new) fits: CITROEN JUMPER III PEUGEOT BOXER 2.0D 07.15-09.19

View part

PASCAL Drive axle shaft core #G2P064PC

Rdzeń Wał napędowy przód L 834mm pasuje do: CITROEN JUMPER II PEUGEOT BOXER 2.0D 07.15-

View part

PASCAL Axle shaft G2P066PC

Drive axle shaft front R 923mm (new) fits: PEUGEOT 308 II 1.2/1.6/1.6D 09.13-06.21

View part

PASCAL Drive axle shaft core #G2P066PC

Rdzeń Wał napędowy przód P 923mm pasuje do: PEUGEOT 308 II 1.2/1.6/1.6D 09.13-06.21

View part

PASCAL Axle shaft G2P067PC

Drive axle shaft front L 682mm (new) fits: PEUGEOT 308 II, PARTNER FURGON/NADWOZIE WIELKOPRZESTRZENNE, RIFTER 1.2-1.6D 09.13-

View part

PASCAL Drive axle shaft core #G2P067PC

Rdzeń Wał napędowy przód L 682mm pasuje do: PEUGEOT 308 II 1.2/1.6/1.6D 09.13-06.21

View part

PASCAL Axle shaft G2P068PC

Drive axle shaft rear R 665mm (new) fits: PEUGEOT 3008 I 2.0DH 02.11-08.16

View part

PASCAL Drive axle shaft core #G2P068PC

Rdzeń Wał napędowy tył P 665mm pasuje do: PEUGEOT 3008 I 2.0DH 02.11-08.16

View part

PASCAL Axle shaft G2P069PC

Drive axle shaft front L 645mm (new) fits: PEUGEOT 508 I 2.0D 10.14-12.18

View part

PASCAL Drive axle shaft core #G2P069PC

Rdzeń Wał napędowy przód L 645mm pasuje do: PEUGEOT 508 I 2.0D 10.14-12.18

View part

PASCAL Axle shaft G2P070PC

Drive axle shaft front R 985mm (new) fits: PEUGEOT 508 I 1.6/1.6D 11.10-12.18

View part

PASCAL Drive axle shaft core #G2P070PC

Rdzeń Wał napędowy przód P 985mm pasuje do: PEUGEOT 508 I 1.6/1.6D 11.10-12.18

View part

PASCAL Axle shaft G2P072PC

Drive axle shaft front R 964mm (new) fits: PEUGEOT 508 I 1.6D 11.10-12.18

View part

PASCAL Axle shaft #G2P072PC

Rdzeń Wał napędowy przód P 964mm pasuje do: PEUGEOT 508 I 1.6D 11.10-12.18

View part

PASCAL Axle shaft G2P073PC

Drive axle shaft front R 961mm (new) fits: PEUGEOT 308 II 2.0D 11.13-06.21

View part

PASCAL Drive axle shaft core #G2P073PC

Rdzeń Wał napędowy przód P 961mm pasuje do: PEUGEOT 308 II 2.0D 11.13-06.21

View part

PASCAL Axle shaft G2P074PC

Drive axle shaft front L 639mm (new) fits: PEUGEOT 508 I 1.6/1.6D 11.10-12.18

View part

PASCAL Drive axle shaft core #G2P074PC

Rdzeń Wał napędowy przód L 639mm pasuje do: PEUGEOT 508 I 1.6/1.6D 11.10-12.18

View part

PASCAL Axle shaft G2P075PC

Drive axle shaft front R 766mm (new) fits: PEUGEOT 2008 I, 207 1.6/1.6D 02.07-

View part

PASCAL Drive axle shaft core #G2P075PC

Rdzeń Wał napędowy przód P 766mm pasuje do: PEUGEOT 2008 I, 207 1.6/1.6D 02.07-

View part

PASCAL Axle shaft G2P076PC

Drive axle shaft front L 642mm (with ABS ring, new) fits: PEUGEOT 407, 508 I 2.0D 05.04-

View part

PASCAL Drive axle shaft core #G2P076PC

Rdzeń Wał napędowy przód L 642mm (z pierścieniem ABS) pasuje do: PEUGEOT 407, 508 I 2.0D 05.04-

View part

PASCAL Axle shaft G2P077PC

Drive axle shaft front R 973mm (new, vehicles without ABS) fits: PEUGEOT 407 2.2/3.0 03.04-

View part

PASCAL Axle shaft #G2P077PC

Rdzeń Wał napędowy przód P 973mm (pojazdy bez ABS) pasuje do: PEUGEOT 407 2.2/3.0 03.04-

View part

PASCAL Axle shaft G2P078PC

Drive axle shaft front R 856mm (new, vehicles without ABS) fits: CITROEN C3 II, DS3 PEUGEOT 207 1.0-1.6D 02.06-

View part

PASCAL Drive axle shaft core #G2P078PC

Rdzeń Wał napędowy przód P 856mm (pojazdy bez ABS) pasuje do: CITROEN C3 II, DS3 PEUGEOT 207, 207/HATCHBACK 1.0-1.6D 02.06-

View part

PASCAL Axle shaft G2P080PC

Drive axle shaft front R 868mm (new, vehicles without ABS) fits: PEUGEOT 208 I 1.6D 01.13-12.19

View part

PASCAL Drive axle shaft core #G2P080PC

Rdzeń Wał napędowy przód P 868mm (pojazdy bez ABS) pasuje do: PEUGEOT 208 I 1.6D 01.13-12.19

View part

PASCAL Axle shaft G2P082PC

Drive axle shaft front R 927mm (new, vehicles without ABS) fits: PEUGEOT 607 2.7D/3.0 03.04-07.11

View part

PASCAL Drive axle shaft core #G2P082PC

Rdzeń Wał napędowy przód P 927mm (pojazdy bez ABS) pasuje do: PEUGEOT 607 2.7D/3.0 03.04-07.11

View part

PASCAL Axle shaft G2P083PC

Drive axle shaft front R 939mm (new, vehicles without ABS) fits: PEUGEOT 308 I, 308 II 1.2/1.6/1.6D 03.13-06.21

View part

PASCAL Drive axle shaft core #G2P083PC

Rdzeń Wał napędowy przód P 939mm (pojazdy bez ABS) pasuje do: PEUGEOT 308 I, 308 II 1.2/1.6/1.6D 03.13-06.21

View part

PASCAL Axle shaft G2P084PC

Drive axle shaft front R 892mm (new, vehicles without ABS) fits: PEUGEOT 206 1.6D/2.0/2.0D 04.99-

View part

PASCAL Drive axle shaft core #G2P084PC

Rdzeń Wał napędowy przód P 892mm (pojazdy bez ABS) pasuje do: PEUGEOT 206 1.6D/2.0/2.0D 04.99-

View part

PASCAL Axle shaft G2P085PC

Drive axle shaft front L 671mm (new, vehicles without ABS) fits: PEUGEOT 308 I, 308 II 1.2/1.6D 03.13-06.21

View part

PASCAL Drive axle shaft core #G2P085PC

Rdzeń Wał napędowy przód L 671mm (pojazdy bez ABS) pasuje do: PEUGEOT 308 I, 308 II 1.2/1.6D 03.13-06.21

View part

PASCAL Axle shaft G2P086PC

Drive axle shaft front L 641mm (new, vehicles without ABS) fits: PEUGEOT 308 II 1.2-2.0D 09.13-06.21

View part

PASCAL Drive axle shaft core #G2P086PC

Rdzeń Wał napędowy przód L 641mm (pojazdy bez ABS) pasuje do: PEUGEOT 308 II 1.2-2.0D 09.13-06.21

View part

PASCAL Axle shaft G2P087PC

Drive axle shaft front L 606mm (new, vehicles without ABS) fits: PEUGEOT 208 I 1.2 01.13-12.19

View part

PASCAL Drive axle shaft core #G2P087PC

Rdzeń Wał napędowy przód L 606mm (pojazdy bez ABS) pasuje do: PEUGEOT 208 I 1.2 01.13-12.19

View part

PASCAL Axle shaft G2R001PC

Drive axle shaft front L 648mm (for vehicles with ABS, new) fits: RENAULT LAGUNA I, LOGAN II, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH 1.6/1.9D/2.0 09.95-

View part

PASCAL Drive axle shaft core #G2R001PC

Rdzeń Wał napędowy przód L 648mm (dla pojazdów z ABS) pasuje do: RENAULT LAGUNA I, LOGAN II, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH 1.6/1.9D/2.0 09.95-

View part

PASCAL Axle shaft G2R002PC

Drive axle shaft front R 748mm (for vehicles with ABS, new) fits: RENAULT MEGANE I, MEGANE I CLASSIC, MEGANE I COACH 1.6/1.9D/2.0 01.96-12.04

View part

PASCAL Drive axle shaft core #G2R002PC

Rdzeń Wał napędowy przód P 748mm (dla pojazdów z ABS) pasuje do: RENAULT MEGANE I, MEGANE I CLASSIC, MEGANE I COACH 1.6/1.9D/2.0 01.96-12.04

View part

PASCAL Axle shaft G2R003PC

Drive axle shaft front R 748mm (new) fits: RENAULT MEGANE I, MEGANE I CLASSIC, MEGANE SCÉNIC 1.6/1.9D/2.0 01.97-08.03

View part

Buying with Partios

Buying PASCAL parts through Partios

Are these genuine PASCAL parts?

Yes. Every PASCAL line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source PASCAL parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for PASCAL lines that aren't currently available.

Do you supply PASCAL parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on PASCAL parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a PASCAL order?

It depends on the line. Stocked PASCAL items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for PASCAL parts?

No. There's no minimum order value or quantity on a Partios trade account. Some PASCAL lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account