Partios Wholesale catalogue

Pascal Distributor | Transmission & Driveline

Axle shaft (1,321) · Drive axle shaft core (1,119) · Driveshaft joint (946) · Axle rubber boot set (291) · Steering gear boot (186) · Drive shaft (78) · Joint repair kit (20) · Circlip (18) · 6 further part types (19)

3,982 current catalogue lines

About the PASCAL range

Partios carries 3,982 Pascal lines of transmission & driveline, spread across 14 part types. The largest groups are axle shaft (1,321), drive axle shaft core (1,119), driveshaft joint (946), axle rubber boot set (291) and steering gear boot (186). Those six account for most of the catalogue; the remaining 57 lines are spread across 8 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes joint repair kit, circlip and bellows band. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 3,982 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

PASCAL Axle shaft G2C076PC

Drive axle shaft front R 833mm (new) fits: CITROEN C4, C4 I PEUGEOT 307 1.6-2.0D 08.00-07.11

View part

PASCAL Axle shaft #G2C076PC

Rdzeń Wał napędowy przód P 833mm pasuje do: CITROEN C4, C4 I PEUGEOT 307 1.6/2.0/2.0D 08.00-07.11

View part

PASCAL Axle shaft G2C077PC

Drive axle shaft front R 912mm (new) fits: CITROEN C4, C4 I PEUGEOT 307 1.4/1.6/1.6D 08.00-11.12

View part

PASCAL Drive axle shaft core #G2C077PC

Rdzeń Wał napędowy przód P 912mm pasuje do: CITROEN C4, C4 I PEUGEOT 307 1.4/1.6/1.6D 08.00-11.12

View part

PASCAL Axle shaft G2C078PC

Drive axle shaft front R 950mm (new) fits: CITROEN C4, C4 I PEUGEOT 307 2.0D 10.03-07.11

View part

PASCAL Drive axle shaft core #G2C078PC

Rdzeń Wał napędowy przód P 950mm pasuje do: CITROEN C4, C4 I PEUGEOT 307, 307/KOMBI 2.0D 10.03-07.11

View part

PASCAL Axle shaft G2C079PC

Drive axle shaft front R 1145mm (for vehicles without ABS, new) fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0D-3.0D 04.06-

View part

PASCAL Drive axle shaft core #G2C079PC

Rdzeń Wał napędowy przód P 1145mm (dla pojazdów bez ABS) pasuje do: CITROEN JUMPER II FIAT DUCATO PEUGEOT BOXER 2.2D/2.3D 04.06-

View part

PASCAL Axle shaft G2C080PC

Drive axle shaft front R 1140mm (new, vehicles without ABS) fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0D-3.0D 04.06-

View part

PASCAL Drive axle shaft core #G2C080PC

Rdzeń Wał napędowy przód P 1140mm (pojazdy bez ABS) pasuje do: CITROEN JUMPER II FIAT DUCATO PEUGEOT BOXER 2.0D-3.0D 04.06-

View part

PASCAL Axle shaft G2C081PC

Drive axle shaft front R 1205mm (new, vehicles without ABS) fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 3.0D 04.06-

View part

PASCAL Drive axle shaft core #G2C081PC

Rdzeń Wał napędowy przód P 1205mm (pojazdy bez ABS) pasuje do: CITROEN JUMPER II FIAT DUCATO PEUGEOT BOXER 3.0D 04.06-

View part

PASCAL Axle shaft G2C082PC

Drive axle shaft front L 750mm (new, vehicles without ABS) fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 3.0D 04.06-

View part

PASCAL Drive axle shaft core #G2C082PC

Rdzeń Wał napędowy przód L 750mm (pojazdy bez ABS) pasuje do: CITROEN JUMPER II FIAT DUCATO PEUGEOT BOXER 3.0D 04.06-

View part

PASCAL Axle shaft G2C083PC

Drive axle shaft front R 980mm (new) fits: CITROEN C8 FIAT ULYSSE LANCIA PHEDRA PEUGEOT 807 2.2D 06.02-

View part

PASCAL Drive axle shaft core #G2C083PC

Rdzeń Wał napędowy przód P 980mm pasuje do: CITROEN C8 FIAT ULYSSE LANCIA PHEDRA PEUGEOT 807 2.2D 06.02-

View part

PASCAL Axle shaft G2C085PC

Drive axle shaft front R 1055mm (new) fits: CITROEN JUMPER II FIAT DUCATO PEUGEOT BOXER 2.8D 12.01-

View part

PASCAL Drive axle shaft core #G2C085PC

Rdzeń Wał napędowy przód P 1055mm pasuje do: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 2.8D 12.01-

View part

PASCAL Axle shaft G2C086PC

Drive axle shaft front R 953mm (for vehicles without ABS, new) fits: CITROEN C5 II 2.0D 09.04-01.08

View part

PASCAL Drive axle shaft core #G2C086PC

Rdzeń Wał napędowy przód P 953mm (dla pojazdów bez ABS) pasuje do: CITROEN C5 II 2.0D 09.04-01.08

View part

PASCAL Axle shaft G2C086PC-WYP.

Drive axle shaft front R 953mm (for vehicles without ABS, new) fits: CITROEN C5 II 2.0D 09.04-01.08

View part

PASCAL Axle shaft G2C087PC

Drive axle shaft front R 960mm (for vehicles with ABS, new) fits: CITROEN C5 III 1.6D-2.0ALK 02.08-10.14

View part

PASCAL Drive axle shaft core #G2C087PC

Rdzeń Wał napędowy przód P 960mm (dla pojazdów z ABS) pasuje do: CITROEN C5 III 1.6D-2.0ALK 02.08-10.14

View part

PASCAL Axle shaft G2C088PC

Drive axle shaft front L 669mm (for vehicles with ABS, new) fits: CITROEN C5 III 1.6D-2.0ALK 02.08-06.15

View part

PASCAL Drive axle shaft core #G2C088PC

Rdzeń Wał napędowy przód L 669mm (dla pojazdów z ABS) pasuje do: CITROEN C5 III 1.6D-2.0ALK 02.08-10.14

View part

PASCAL Axle shaft G2C089PC

Drive axle shaft front R 640mm (new) fits: CITROEN C4 I, DS3 PEUGEOT 207, 208 I 1.0-1.6D 02.06-12.19

View part

PASCAL Drive axle shaft core #G2C089PC

Rdzeń Wał napędowy przód P 640mm pasuje do: CITROEN C4 I, DS3 PEUGEOT 207, 208 I 1.0-1.6D 02.06-12.19

View part

PASCAL Axle shaft G2C090PC

Drive axle shaft front R 935mm (for vehicles with ABS, new) fits: DS DS 4 CITROEN C4 GRAND PICASSO I, C4 II, DS4 PEUGEOT 3008 I, 308, 308 I, 5008 1.2-2.0D 09.07-

View part

PASCAL Drive axle shaft core #G2C090PC

Rdzeń Wał napędowy przód P 935mm (dla pojazdów z ABS) pasuje do: DS DS 4 CITROEN C4 GRAND PICASSO I, C4 II, DS4 PEUGEOT 3008 I, 308, 308 I, 5008 1.2-2.0D 09.07-

View part

PASCAL Axle shaft G2C091PC

Drive axle shaft front R 985mm (new) fits: CITROEN C8 FIAT ULYSSE PEUGEOT 807 2.0D 07.02-

View part

PASCAL Drive axle shaft core #G2C091PC

Rdzeń Wał napędowy przód P 985mm pasuje do: CITROEN C8 FIAT ULYSSE PEUGEOT 807 2.0D 07.02-

View part

PASCAL Axle shaft G2C092PC

Drive axle shaft front L 625mm (for vehicles with ABS, new) fits: DS DS 3, DS 4 CITROEN C3 II, C3 III, C3 PICASSO, C4 GRAND PICASSO I, C4 I, C4 II, C4 PICASSO I, DS3, DS4 1.0-2.0D 02.06-

View part

PASCAL Drive axle shaft core #G2C092PC

Rdzeń Wał napędowy przód L 625mm (dla pojazdów z ABS) pasuje do: DS DS 3, DS 4 CITROEN C3 / C3 ORIGIN III, C3 II, C3 PICASSO, C4 GRAND PICASSO I, C4 I, C4 II, C4 PICASSO I, DS3, DS4 1.0-2.0D 02.06-

View part

PASCAL Axle shaft G2C093PC

Drive axle shaft front R 945mm (new) fits: DS DS 4 CITROEN C4 GRAND PICASSO I, C4 I, C4 II, DS4 PEUGEOT 2008 I, 208 I, 3008 I, 307, 308, 308 I, 406, 5008 1.2-2.0D 11.96-

View part

PASCAL Drive axle shaft core #G2C093PC

Rdzeń Wał napędowy przód P 945mm pasuje do: DS DS 4 CITROEN C4 GRAND PICASSO I, C4 I, C4 II, DS4 PEUGEOT 2008 I, 208 I, 3008 I, 307, 308, 308 I, 308 I/KOMBI, 406, 5008 1.2-2.0D 11.96-

View part

PASCAL Axle shaft G2C096PC

Drive axle shaft front L 655mm (for vehicles without ABS, new) fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE PEUGEOT BIPPER, BIPPER TEPEE 1.4D 02.08-

View part

PASCAL Drive axle shaft core #G2C096PC

Rdzeń Wał napędowy przód L 655mm (dla pojazdów bez ABS) pasuje do: CITROEN NEMO, NEMO/MINIVAN PEUGEOT BIPPER, BIPPER TEPEE 1.4D 02.08-

View part

PASCAL Axle shaft G2C097PC

Drive axle shaft front R 889mm (for vehicles with ABS, new) fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE PEUGEOT BIPPER, BIPPER TEPEE 1.4D 02.08-

View part

PASCAL Drive axle shaft core #G2C097PC

Rdzeń Wał napędowy przód P 889mm (dla pojazdów z ABS) pasuje do: CITROEN NEMO, NEMO/MINIVAN PEUGEOT BIPPER, BIPPER TEPEE 1.4D 02.08-

View part

PASCAL Axle shaft G2C098PC

Drive axle shaft front L 650mm (new) fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, QUBO PEUGEOT BIPPER, BIPPER TEPEE 1.4 11.07-

View part

PASCAL Drive axle shaft core #G2C098PC

Rdzeń Wał napędowy przód L 650mm pasuje do: CITROEN NEMO, NEMO/MINIVAN FIAT FIORINO/MINIVAN, QUBO PEUGEOT BIPPER, BIPPER TEPEE 1.4 11.07-

View part

PASCAL Axle shaft G2C100PC

Drive axle shaft front L 605mm (new) fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE PEUGEOT BIPPER, BIPPER TEPEE 1.3D 10.10-

View part

PASCAL Drive axle shaft core #G2C100PC

Rdzeń Wał napędowy przód L 605mm pasuje do: CITROEN NEMO, NEMO/MINIVAN PEUGEOT BIPPER, BIPPER TEPEE 1.3D 10.10-

View part

PASCAL Axle shaft G2C101PC

Drive axle shaft front R 920mm (for vehicles with ABS, new) fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE PEUGEOT BIPPER, BIPPER TEPEE 1.3D 10.10-

View part

PASCAL Drive axle shaft core #G2C101PC

Rdzeń Wał napędowy przód P 920mm (dla pojazdów z ABS) pasuje do: CITROEN NEMO, NEMO/MINIVAN PEUGEOT BIPPER, BIPPER TEPEE 1.3D 10.10-

View part

PASCAL Axle shaft G2C102PC

Drive axle shaft front R 998mm (new) fits: CITROEN C5 III, DS5, JUMPY II FIAT SCUDO PEUGEOT 407, 508 I, EXPERT, EXPERT TEPEE 2.0D 05.04-

View part

PASCAL Drive axle shaft core #G2C102PC

Rdzeń Wał napędowy przód P 998mm pasuje do: CITROEN DS5, JUMPY II FIAT SCUDO PEUGEOT 407, EXPERT, EXPERT TEPEE 2.0D 05.04-

View part

PASCAL Axle shaft G2C103PC

Drive axle shaft front L 676mm (new) fits: CITROEN C5 III, JUMPY II FIAT SCUDO PEUGEOT 407, EXPERT, EXPERT TEPEE 1.6D/2.0D/2.2D 05.04-

View part

Buying with Partios

Buying PASCAL parts through Partios

Are these genuine PASCAL parts?

Yes. Every PASCAL line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source PASCAL parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for PASCAL lines that aren't currently available.

Do you supply PASCAL parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on PASCAL parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a PASCAL order?

It depends on the line. Stocked PASCAL items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for PASCAL parts?

No. There's no minimum order value or quantity on a Partios trade account. Some PASCAL lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account