Partios Wholesale catalogue

Pascal Distributor | Transmission & Driveline

Axle shaft (1,321) · Drive axle shaft core (1,119) · Driveshaft joint (946) · Axle rubber boot set (291) · Steering gear boot (186) · Drive shaft (78) · Joint repair kit (20) · Circlip (18) · 6 further part types (19)

3,982 current catalogue lines

About the PASCAL range

Partios carries 3,982 Pascal lines of transmission & driveline, spread across 14 part types. The largest groups are axle shaft (1,321), drive axle shaft core (1,119), driveshaft joint (946), axle rubber boot set (291) and steering gear boot (186). Those six account for most of the catalogue; the remaining 57 lines are spread across 8 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes joint repair kit, circlip and bellows band. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 3,982 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

PASCAL Drive axle shaft core #G24018PC

Rdzeń Wał napędowy przód L 615mm (pojazdy bez ABS) pasuje do: HONDA CITY IV, CIVIC VI, CIVIC VIII, JAZZ II 1.2-1.8 10.95-12.13

View part

PASCAL Axle shaft G24019PC

Drive axle shaft front L 640mm (new, vehicles without ABS) fits: HONDA CR-V III 2.2D 01.07-06.12

View part

PASCAL Drive axle shaft core #G24019PC

Rdzeń Wał napędowy przód L 640mm (pojazdy bez ABS) pasuje do: HONDA CR-V III 2.2D 01.07-

View part

PASCAL Axle shaft G24020PC

Drive axle shaft front L/R 639mm fits: HONDA JAZZ IV 1.3 09.15-

View part

PASCAL Axle shaft G24021PC

Drive axle shaft front L/R 671mm fits: HONDA HR-V 1.5 08.15-

View part

PASCAL Axle shaft G24022PC

Drive axle shaft front R 630mm fits: HONDA HR-V 1.5 08.15-

View part

PASCAL Axle shaft G25001PC

Drive axle shaft front R 960mm (new) fits: MITSUBISHI CARISMA, SPACE STAR 1.9D 09.00-06.06

View part

PASCAL Drive axle shaft core #G25001PC

Rdzeń Wał napędowy przód P 960mm pasuje do: MITSUBISHI CARISMA, SPACE STAR 1.9D 09.00-06.06

View part

PASCAL Axle shaft G25002PC

Drive axle shaft front R 812mm (new) fits: MITSUBISHI SPACE STAR 1.3/1.6 06.98-12.04

View part

PASCAL Drive axle shaft core #G25002PC

Rdzeń Wał napędowy przód P 812mm pasuje do: MITSUBISHI SPACE STAR 1.3/1.6 06.98-12.04

View part

PASCAL Axle shaft G25003PC

Drive axle shaft front R 987mm (new) fits: MITSUBISHI ASX, OUTLANDER III 1.8D/2.2D 06.10-

View part

PASCAL Drive axle shaft core #G25003PC

Rdzeń Wał napędowy przód P 987mm pasuje do: MITSUBISHI ASX, OUTLANDER III 1.8D/2.2D 06.10-

View part

PASCAL Axle shaft G25004PC

Drive axle shaft front L 631mm (new) fits: MITSUBISHI ASX, OUTLANDER III 1.8D/2.0/2.2D 06.10-

View part

PASCAL Drive axle shaft core #G25004PC

Rdzeń Wał napędowy przód L 631mm pasuje do: MITSUBISHI ASX, OUTLANDER III 1.8D/2.0/2.2D 06.10-

View part

PASCAL Axle shaft G25005PC

Drive axle shaft front R 993mm (new, vehicles without ABS) fits: MITSUBISHI OUTLANDER II 2.0D/2.2D 02.07-11.12

View part

PASCAL Drive axle shaft core #G25005PC

Rdzeń Wał napędowy przód P 993mm (pojazdy bez ABS) pasuje do: MITSUBISHI OUTLANDER II 2.0D/2.2D 02.07-11.12

View part

PASCAL Axle shaft G25006PC

Drive axle shaft front L 624mm (new) fits: MITSUBISHI COLT CZC VI, COLT VI SMART FORFOUR 1.1-1.5 01.04-06.12

View part

PASCAL Drive axle shaft core #G25006PC

Rdzeń Wał napędowy przód L 624mm pasuje do: MITSUBISHI COLT CZC VI, COLT VI SMART FORFOUR 1.1-1.5 01.04-06.12

View part

PASCAL Axle shaft G25007PC

Drive axle shaft front R 916mm (new) fits: MITSUBISHI COLT CZC VI, COLT VI SMART FORFOUR 1.1-1.5 01.04-06.12

View part

PASCAL Drive axle shaft core #G25007PC

Rdzeń Wał napędowy przód P 916mm pasuje do: MITSUBISHI COLT CZC VI, COLT VI SMART FORFOUR 1.1-1.5 01.04-06.12

View part

PASCAL Axle shaft G25008PC

Drive axle shaft front L/R 650mm fits: MITSUBISHI ASX, LANCER VIII, OUTLANDER II 1.8/2.0 11.06-

View part

PASCAL Axle shaft G28001PC

Drive axle shaft front R 680mm (for vehicles without ABS, new) fits: SUZUKI SWIFT II 1.0 03.89-12.05

View part

PASCAL Drive axle shaft core #G28001PC

Rdzeń Wał napędowy przód P 680mm (dla pojazdów bez ABS) pasuje do: SUZUKI SWIFT II 1.0 03.89-12.05

View part

PASCAL Axle shaft G28002PC

Drive axle shaft front R 590mm (new) fits: SUZUKI SWIFT, SWIFT II 1.3 03.89-05.01

View part

PASCAL Drive axle shaft core #G28002PC

Rdzeń Wał napędowy przód P 590mm pasuje do: SUZUKI SWIFT, SWIFT II 1.3 03.89-05.01

View part

PASCAL Axle shaft G28003PC

Drive axle shaft front L 620mm (for vehicles with ABS, new) fits: SUZUKI IGNIS II 1.3/1.3D/1.5 08.03-12.12

View part

PASCAL Drive axle shaft core #G28003PC

Rdzeń Wał napędowy przód L 620mm (dla pojazdów z ABS) pasuje do: SUZUKI IGNIS II 1.3/1.3D/1.5 09.03-

View part

PASCAL Axle shaft G28004PC

Drive axle shaft front R 611mm (for vehicles with ABS, new) fits: SUZUKI IGNIS II 1.3/1.3D/1.5 08.03-12.12

View part

PASCAL Drive axle shaft core #G28004PC

Rdzeń Wał napędowy przód P 611mm (dla pojazdów z ABS) pasuje do: SUZUKI IGNIS II 1.3/1.3D/1.5 09.03-

View part

PASCAL Axle shaft G28006PC

Drive axle shaft front L 653mm (for vehicles with ABS, new) fits: SUZUKI SWIFT III 1.3 02.05-06.15

View part

PASCAL Drive axle shaft core #G28006PC

Rdzeń Wał napędowy przód L 653mm (dla pojazdów z ABS) pasuje do: SUZUKI SWIFT III 1.3 02.05-

View part

PASCAL Axle shaft G28007PC

Drive axle shaft front L 636mm (for vehicles with ABS, new) fits: SUZUKI SWIFT III 1.2/1.3/1.3D 02.05-06.15

View part

PASCAL Drive axle shaft core #G28007PC

Rdzeń Wał napędowy przód L 636mm (dla pojazdów z ABS) pasuje do: SUZUKI SWIFT III 1.2/1.3/1.3D 02.05-

View part

PASCAL Axle shaft G28008PC

Drive axle shaft front R 593mm (new) fits: SUZUKI LIANA 1.3/1.6 07.01-

View part

PASCAL Drive axle shaft core #G28008PC

Rdzeń Wał napędowy przód P 593mm pasuje do: SUZUKI LIANA 1.3/1.6 07.01-

View part

PASCAL Axle shaft G28009PC

Drive axle shaft front R 700mm (for vehicles with ABS, new) fits: FIAT SEDICI SUZUKI SX4, SX4 S-CROSS 1.6 06.06-

View part

PASCAL Drive axle shaft core #G28009PC

Rdzeń Wał napędowy przód P 700mm (dla pojazdów z ABS) pasuje do: FIAT SEDICI SUZUKI SX4, SX4 S-CROSS 1.6 06.06-

View part

PASCAL Axle shaft G28010PC

Drive axle shaft front L 610mm (new) fits: FIAT SEDICI SUZUKI SX4 1.5/1.6 06.06-

View part

PASCAL Drive axle shaft core #G28010PC

Rdzeń Wał napędowy przód L 610mm pasuje do: FIAT SEDICI SUZUKI SX4 1.5/1.6 06.06-

View part

PASCAL Axle shaft G28011PC

Drive axle shaft front L 595mm (for vehicles without ABS, new) fits: SUZUKI GRAND VITARA I, SAMURAI, VITARA 1.3/1.6 07.88-10.02

View part

PASCAL Drive axle shaft core #G28011PC

Rdzeń Wał napędowy przód L 510mm (dla pojazdów bez ABS) pasuje do: SUZUKI GRAND VITARA I, SAMURAI, VITARA 1.3/1.6 07.88-10.02

View part

PASCAL Axle shaft G28012PC

Drive axle shaft front R 895mm (new) fits: SUZUKI SWIFT III 1.3 02.05-06.15

View part

PASCAL Drive axle shaft core #G28012PC

Rdzeń Wał napędowy przód P 895mm pasuje do: SUZUKI SWIFT III 1.3 02.05-

View part

PASCAL Axle shaft G28013PC

Drive axle shaft front L 613mm (new, vehicles without ABS) fits: SUZUKI GRAND VITARA II 1.6-3.2 04.05-

View part

PASCAL Drive axle shaft core #G28013PC

Rdzeń Wał napędowy przód P 613mm (pojazdy bez ABS) pasuje do: SUZUKI GRAND VITARA II 1.6-3.2 04.05-

View part

PASCAL Axle shaft G28014PC

Drive axle shaft front R 596mm (new, vehicles without ABS) fits: SUZUKI VITARA 1.6 07.88-10.02

View part

PASCAL Drive axle shaft core #G28014PC

Rdzeń Wał napędowy przód P 596mm (pojazdy bez ABS) pasuje do: SUZUKI VITARA 1.6 07.88-10.02

View part

PASCAL Axle shaft G28015PC

Drive axle shaft front R 613mm (new, vehicles without ABS) fits: SUZUKI BALENO 1.3/1.6 07.95-05.02

View part

Buying with Partios

Buying PASCAL parts through Partios

Are these genuine PASCAL parts?

Yes. Every PASCAL line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source PASCAL parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for PASCAL lines that aren't currently available.

Do you supply PASCAL parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on PASCAL parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a PASCAL order?

It depends on the line. Stocked PASCAL items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for PASCAL parts?

No. There's no minimum order value or quantity on a Partios trade account. Some PASCAL lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account