Partios Wholesale catalogue

Optibelt Distributor | Engine Components

Drive belt (3,346) · V-belt (2,295) · Multi-v-belt (528) · Bearing sleeve (48) · Pulley (18) · Multi-v belt tensioner (9) · Multi v-belt pulley (6) · Water pump v-belt (5) · 11 further part types (22)

6,269 current catalogue lines

About the OPTIBELT range

Optibelt covers engine components at Partios. It has 6,269 lines across 19 part types, rather than depth in a single one. The largest groups are drive belt (3,346), v-Belt (2,295), multi-V-belt (528), bearing sleeve (48) and pulley (18). Those six account for most of the catalogue; the remaining 33 lines are spread across 13 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes multi V-belt pulley, water pump V-Belt and accessories for measuring devices. Typical buyers are workshops, motor factors and exporters, where these are mostly scheduled-replacement or failure-driven items, where correct application matching is what decides the order. At 6,269 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

OPTIBELT Drive belt 1004921AP

V-belt 2B16,7x13,5x4860 fits: CLAAS 160/450, 240/451 DEUTZ FAHR M 1600, M 1620, M 1630 JOHN DEERE 9450, 9550, 9560, 9600 MAXIMIZER, 9610, 9610 MAXIMIZER, 9650 CTS, 9650 STS, 9650 STS SA

View part

OPTIBELT Drive belt 1004922AP

V-belt fits: DEUTZ FAHR 6095 HTS, 6095 HTS COM 3 B NEW HOLLAND 34

View part

OPTIBELT Drive belt 1004923AP

V-belt number of ribs: 4, wedge width: 15,5mm, wedge height: 16,7mm, inner length: 3630mm, standard length: 3685mm fits: CASE IH 2388

View part

OPTIBELT Drive belt 1004924AP

V-belt number of ribs: 4, wedge width: 15,5mm, wedge height: 16,7mm, inner length: 3480mm, standard length: 3556mm, belt profile 15J fits: CASE IH 5088, 6088, 6130, 7088, 7130

View part

OPTIBELT Drive belt 1004925AP

V-belt number of ribs: 4, wedge width: 23mm, wedge height: 17mm, inner length: 3835mm, belt profile 4HC fits: CASE IH 5088, 6088, 7088

View part

OPTIBELT Drive belt 1004926AP

V-belt B17x11x6300Li fits: CASE IH 5088, 6088, 6130, 6140, 7088, 7130, 7140 CLAAS 410, 410 II, 420 MONTANA, 430 II, 430 MONTANA, 440, 440 II, 450 II MTS, 460 II, 460 II MTS

View part

OPTIBELT Drive belt 1004928AP

V-belt 2/17 , CLAAS 160/450, 240/451 DEUTZ FAHR M 1600, M 1620, M 1630 JOHN DEERE 9450, 9550, 9560, 9600 MAXIMIZER, 9610, 9610 MAXIMIZER, 9650 CTS, 9650 STS, 9650 STS SA, 9660 NA

View part

OPTIBELT Drive belt 1004931AP

V-belt fits: LAVERDA M92

View part

OPTIBELT Drive belt 1004936AP

V-belt C22x14x4445Li fits: BIZON Z 140 NORDIC CLAAS 160/450, 160/560, 240/451, 240/561, 114, 114 CS, 115, 115 CS, 116, 116 CS, 228, 228 CS, 112, 112 S, 112 SL, 130, 140 (200), 150 (200), 38

View part

OPTIBELT Drive belt 1005010AP

V-belt, wedge width: 9,7mm, wedge height: 8mm, standard length: 1837mm, belt profile SPZ fits: CLAAS 620, 622

View part

OPTIBELT Drive belt 1005014AP

V-belt fits: LAVERDA L518, L520, L523, L523 MCS, L525, L525 MCS, L625, L627, L627 MCS

View part

OPTIBELT Drive belt 1005033AP

V-belt 4B16,7x13,5x2970 fits: NEW HOLLAND 720, 740, 760, 780, 8030, 8040, 8050, 8060, 8070, 8080, 8090, 820, 840, 860, 880, CX7.80, CX7.90, CX8.70, CX8.80, CX8.85, CX8.90

View part

OPTIBELT Drive belt 1005036AP

V-belt B17x11x3550Li fits: CLAAS 630, 640, GIGANT, MATADOR, SF STANDARD, 50, 60, 70, 75, PROTECTOR, 85 DEUTZ FAHR M 2480, M 2780, M 600, M 660, M 750, M 770

View part

OPTIBELT Drive belt 1005038AP

V-belt 4B16,7x13,5x2240 fits: CLAAS 203 MEGA, 203 MEGA II, 204, 203, 203 II, 204 II

View part

OPTIBELT Drive belt 1005039AP

V-belt fits: NEW HOLLAND TR89, TR98, TR99

View part

OPTIBELT Drive belt 1005045AP

V-belt number of ribs: 2, wedge width: 17mm, wedge height: 11mm, standard length: 3280mm, belt profile B fits: DEUTZ FAHR 6040 ECO, 6040 ECO COM 3 B, 6040 ECO HTS, 6040 ECO HTS COM 3B, M 1300

View part

OPTIBELT Drive belt 1005048AP

V-belt 3/17 , LAVERDA 3300 AL, 3350 AL, M112AL

View part

OPTIBELT Drive belt 1005061AP

V-belt fits: LAVERDA 3300, 3300 AL, M84, M92

View part

OPTIBELT Drive belt 1005064AP

V-belt number of ribs: 4, wedge width: 17mm, wedge height: 11mm, standard length: 4460mm, belt profile B fits: CLAAS 682 LS, 682 S, 682 SL, 800, 800 (491) DEUTZ FAHR M 3630, M 3640

View part

OPTIBELT Drive belt 1005070AP

V-belt fits: CASE IH 6130, 6140, 7130, 7140

View part

OPTIBELT Drive belt 1005071AP

V-belt fits: CASE IH 6130, 7130

View part

OPTIBELT Drive belt 1005072AP

V-belt fits: CASE IH 7010, 8010, 8120, 9120, AFX8010 DEUTZ FAHR M 2480, M 2780 JOHN DEERE 1166, 1166H, 1169, 1169H, 4435, 4435H

View part

OPTIBELT Drive belt 1005079AP

V-belt fits: JOHN DEERE 550, 560, 660, 540, 650

View part

OPTIBELT Drive belt 1005083AP

V-belt fits: JOHN DEERE 670, 680, 690, 770, 780, 790

View part

OPTIBELT Drive belt 1005085AP

V-belt fits: ARBOS 1220 DRONNINGBORG D 1200, D 1250, D 1600, D 1650, D 2500, D 2600 JOHN DEERE 1470, 1470G ROSTSELMASH 161

View part

OPTIBELT Drive belt 1005087AP

V-belt fits: CLAAS 160/450, 240/451, 106, 106 SL, 130, 140 (200), 150 (200) JOHN DEERE 9935, 550, 560, 660, 670

View part

OPTIBELT Drive belt 1005089AP

V-belt fits: FORTSCHRITT E 524, E 525 ROSTSELMASH 1500, 1500 A

View part

OPTIBELT Drive belt 1005090AP

V-belt fits: BIZON Z 115 CASE IH 1680, 16810 DEUTZ FAHR M 2480, M 2780 NEW HOLLAND CR9040, CR9060, CR9070, CR9070 ELEVATION, CR9080 ELEVATION, 720, 740, 760, 780, 8030, 8040, 8050, 8060, 8070

View part

OPTIBELT Drive belt 1005096AP

V-belt number of ribs: 2, wedge width: 17mm, standard length: 2665mm, belt profile HB fits: CASE IH 7230, 7240, 8230, 8240, 9230, 9240 ROSTSELMASH 530, 1500, 680, 161

View part

OPTIBELT Drive belt 1005102AP

V-belt, wedge width: 32mm, wedge height: 19mm, standard length: 3130mm fits: LAVERDA 3350 AL, 3350 EX M, 3450, M112, M112AL, M120, M132, M150, M152

View part

OPTIBELT Drive belt 1005103AP

V-belt fits: FENDT 5250 ALLIS CHALMERS 185, 6060, 6070, 6080, 7000, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030, 8050, 8070, D21, D21 SERIES II, HD21, HD21A, HD21AC, HXE10556

View part

OPTIBELT Drive belt 1005109AP

V-belt fits: CLAAS 950, 980

View part

OPTIBELT Drive belt 1005121AP

V-belt fits: CASE IH 1420, 1440 E, 1460, 1460 E, 1620, 1640E, 422 DRONNINGBORG D 3000 S, D 4000, D 4000 S, D 4500 JOHN DEERE 6620, 6622, 7720, 7721, 8820 MASSEY FERGUSON 24, 300

View part

OPTIBELT Drive belt 1005123AP

V-belt fits: NEW HOLLAND CR10.90, CR9.90

View part

OPTIBELT Drive belt 1005129AP

V-belt fits: LAVERDA MX240, MX240 R, MX300, MX300 R MASSEY FERGUSON 530, 530 S, 535, 560, 565, 5650, 660, 665

View part

OPTIBELT Drive belt 1005132AP

V-belt fits: BRAUD 701, 701 B CASE IH TD9, TD9B JOHN DEERE 350, 350C, 401B, 450, 450C VERSATILE 555, 900, 900-2, 935

View part

OPTIBELT Drive belt 1005136AP

V-belt fits: CLAAS 570/C07, 570/C38, 580 (C38), 580/C07, 580/C38, 580/L07 DRONNINGBORG D 8900, D 9000 MASSEY FERGUSON MF 34, MF 38

View part

OPTIBELT Drive belt 1005192AP

V-belt number of ribs: 3, wedge width: 16,5mm, wedge height: 15mm, standard length: 8265mm, belt profile HB fits: CLAAS 740/C71, 740/C75, 760/C71, 760/C75, 770/572, 780/C66, 780/C76

View part

OPTIBELT Drive belt 1005294AP

Multi-ribbed belt fits: CASE IH 6130, 6140, 7130, 7140

View part

OPTIBELT Drive belt 1005295AP

V-belt fits: CASE IH 7230, 8230, 9230

View part

OPTIBELT Drive belt 1005336AP

Variator belt number of ribs: 1, wedge width: 22mm, wedge height: 14mm, standard length: 4216mm, belt profile C fits: CASE NEW HOLLAND

View part

OPTIBELT Drive belt 1005348AP

Variator belt fits: BRAUD 503, 504, 505, 605, 640, 650, 700, 701, 701 B, 750, 755, 800, 801, 801 B JOHN DEERE 8245 R, 8260 R, 8270 R, 8285 R, 8295 R, 8310 R, 8310 RT, 8320 R, 8320 RT, 8335 R

View part

OPTIBELT Drive belt 1005349AP

Multi-ribbed belt 8PK28x3300 fits: JOHN DEERE 6090MC, 6090RC, 6095MC, 6095RC, 6100MC, 6100RC, 6105M, 6105MC, 6105RC, 6110M, 6110MC, 6110R, 6110RC, 6115M, 6115MC, 6115RC, 6120M, 6120R, 6125 M

View part

OPTIBELT Drive belt 1005362AP

Variator belt 77x30x2935 fits: NEW HOLLAND CR10.90, CR8090, CR8.90, CR9080, CR9080 ELEVATION, CR9090, CR9.80, CR980, CR9.90

View part

OPTIBELT Drive belt 1005396AP

V-belt, wedge width: 10mm, wedge height: 8mm, standard length: 775mm, belt profile XPZ fits: CASE IH 930, 940 NEW HOLLAND TC18D, TC21D, TC24, TC24D, TC24DA, TC26, TZ 18D A, TZ 22 DA, TZ 24 DA

View part

OPTIBELT V-Belt 1005417AP

V-Belt (length: 1137mm) fits: FENDT 2 D FARMER (FW 228), 2 DE FARMER, 2 E FARMER, FIX 2E, 610 LS FAVORIT, 610 S FAVORIT, 610 SA FAVORIT, 610 SL FAVORIT, 611 LS FAVORIT, 611 LSA FAVORIT

View part

OPTIBELT Drive belt 1005425AP

V-belt, wedge width: 10mm, standard length: 1225mm fits: FENDT 102 FARMER, 102 LS FARMER, 102 LSA FARMER, 102 S FARMER, 102 SA FARMER, 103 FARMER, 103 LS FARMER, 103 LSA FARMER, 103 S FARMER

View part

OPTIBELT Drive belt 1005440AP

V-belt, wedge width: 9,7mm, wedge height: 8mm, standard length: 1362mm, belt profile XPZ fits: FENDT 310 FARMER, 310 LS FARMER, 310 LSA FARMER, 310 VARIO, 311 FARMER, 311 LSA FARMER, 311 VARIO

View part

Buying with Partios

Buying OPTIBELT parts through Partios

Are these genuine OPTIBELT parts?

Yes. Every OPTIBELT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source OPTIBELT parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for OPTIBELT lines that aren't currently available.

Do you supply OPTIBELT parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on OPTIBELT parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a OPTIBELT order?

It depends on the line. Stocked OPTIBELT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for OPTIBELT parts?

No. There's no minimum order value or quantity on a Partios trade account. Some OPTIBELT lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account