Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 6501570B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 45mm fits: AUDI A1, A3, Q3, TT SEAT ALHAMBRA, ALTEA, ALTEA XL, ATECA, LEON, LEON SC, LEON ST, TOLEDO III 02.03-

View part

MPBS Polyurethane suspension sleeve 6501749-00/80SHA

Polyurethane front Swingarm bushing, hardness: 80 Sha, outer diameter: 65mm, length 50mm, quantity per set: 1pcs fits: AUDI A1, A1 ALLSTREET, A3, Q3 FORD TOURNEO CONNECT V761 NADWOZIE WIELKO 04.12-

View part

MPBS Polyurethane suspension sleeve 6501749-00/90SHA

Polyurethane front Swingarm bushing, hardness: 90 Sha, outer diameter: 65mm, length 50mm, quantity per set: 1pcs fits: AUDI A1, A1 ALLSTREET, A3, Q3 FORD TOURNEO CONNECT V761 NADWOZIE WIELKO 04.12-

View part

MPBS Polyurethane suspension sleeve 6502953-4X4-00/80SHA

Rear beam bushings 62mm, outer diameter: 62mm, length 30mm, quantity per set: 4pcs fits: VW GOLF III, PASSAT B3/B4 08.88-04.99

View part

MPBS Polyurethane suspension sleeve 6502953-4X4-00/90SHA

Polyurethane bushing, outer diameter: 62mm, length 30mm fits: VW GOLF III, PASSAT B3/B4 08.88-04.99

View part

MPBS Polyurethane suspension sleeve 6503101/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6503101/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6503102/80SHA

Polyurethane suspension bushings set, hardness: 80 Sha, quantity per set: 12pcs fits: AUDI A4 B5, A6 C5 SKODA SUPERB I VW PASSAT B5 11.94-03.08

View part

MPBS Polyurethane suspension sleeve 6503102/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 65031146-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 65031146-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6503153-00/80SHA

Polyurethane bushing, outer diameter: 70mm, length 88mm fits: AUDI A6 C5 SKODA SUPERB I VW PASSAT B5.5 01.97-03.08

View part

MPBS Polyurethane suspension sleeve 6503153-00/90SHA

Polyurethane bushing, outer diameter: 70mm, length 88mm fits: AUDI A6 C5 SKODA SUPERB I VW PASSAT B5.5 01.97-03.08

View part

MPBS Polyurethane suspension sleeve 6503160-00/80SHA

Front lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 65mm, length 80mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 B5, A4 B6, A4 B7, A4 B8, A6 C5, A6 C6, A8 D2 03.94-05.16

View part

MPBS Polyurethane suspension sleeve 6503160-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 65mm, length 80mm fits: AUDI A4 ALLROAD B8, A4 B5, A4 B6, A4 B7, A4 B8, A6 C5, A8 D2, ALLROAD C5 SKODA SUPERB I VW PASSAT B5 03.94-05.16

View part

MPBS Polyurethane suspension sleeve 6503160-00/CS

Front lower Swingarm bushing (rear), hardness: 75 Sha, outer diameter: 65mm, length 80mm, quantity per set: 1pcs fits: AUDI A4 ALLROAD B8, A4 B5, A4 B6, A4 B7, A4 B8, A6 C5, A6 C6, A8 D2 03.94-05.16

View part

MPBS Polyurethane suspension sleeve 6503312-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40mm, length 37mm fits: AUDI A4 B6, A4 B7 SEAT EXEO, EXEO ST 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 6503312-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 37mm fits: AUDI A4 B6, A4 B7 SEAT EXEO, EXEO ST 11.00-05.13

View part

MPBS Polyurethane suspension sleeve 6503740-00/80SHA

Transmission mount, hardness: 80 Sha, outer diameter: 74,5mm, quantity per set: 1pcs fits: VW POLO, POLO II 03.75-09.94

View part

MPBS Polyurethane suspension sleeve 6503740-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6503753-00/80SHA

Rear beam bushings, outer diameter: 44mm, length 55mm, quantity per set: 2pcs fits: AUDI 50 VW DERBY, POLO, POLO II 08.74-09.94

View part

MPBS Polyurethane suspension sleeve 6503753-00/90SHA

Polyurethane bushing, outer diameter: 44mm, length 55mm fits: AUDI 50 VW DERBY, POLO, POLO II 08.74-09.94

View part

MPBS Polyurethane suspension sleeve 6503948-00/80SHA

Front Swingarm bushing 28mm, hardness: 80 Sha, outer diameter: 28mm, length 47mm, quantity per set: 2pcs fits: SEAT AROSA VW LUPO I, POLO, POLO III, POLO III CLASSIC 10.94-07.05

View part

MPBS Polyurethane suspension sleeve 6503948-00/90SHA

Front Swingarm bushing 28mm, hardness: 90 Sha, outer diameter: 28mm, length 47mm, quantity per set: 2pcs fits: SEAT AROSA VW LUPO I, POLO, POLO III, POLO III CLASSIC 10.94-07.05

View part

MPBS Polyurethane suspension sleeve 6503949-00/80SHA

Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 61mm, length 45mm, quantity per set: 2pcs fits: SEAT AROSA VW LUPO I, POLO, POLO III 10.94-07.05

View part

MPBS Polyurethane suspension sleeve 6503949-00/90SHA

Front Swingarm bushings rear, hardness: 90 Sha, outer diameter: 61mm, length 45mm, quantity per set: 2pcs fits: SEAT AROSA VW LUPO I, POLO, POLO III 10.94-07.05

View part

MPBS Polyurethane suspension sleeve 6503953-00/80SHA

Rear beam bushings, outer diameter: 57mm, length 58mm, quantity per set: 2pcs fits: SEAT AROSA, CORDOBA, CORDOBA VARIO, IBIZA II VW LUPO I, POLO, POLO III, POLO III CLASSIC 02.93-07.06

View part

MPBS Polyurethane suspension sleeve 6503953-00/90SHA

Rear beam bushings, 2pcs, beam, L/R, fits: SEAT AROSA, CORDOBA, CORDOBA VARIO, IBIZA II VW LUPO I, POLO, POLO III, POLO III CLASSIC 1.0-2.0 02.93-07.06

View part

MPBS Polyurethane suspension sleeve 6503953-72-00/80SHA

Polyurethane bushing fits: SEAT AROSA, CORDOBA, IBIZA II VW LUPO I, POLO 02.93-07.05

View part

MPBS Polyurethane suspension sleeve 6503953-72-00/90SHA

Polyurethane bushing fits: SEAT AROSA, CORDOBA, IBIZA II VW LUPO I, POLO 02.93-07.05

View part

MPBS Polyurethane suspension sleeve 6504001/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504001/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504002/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504002/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504402/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504402/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504406-00/80SHA

Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 31,7mm, length 60mm, quantity per set: 2pcs fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN 03.95-03.10

View part

MPBS Polyurethane suspension sleeve 6504406-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 31,7mm, length 60mm fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 03.95-03.10

View part

MPBS Polyurethane suspension sleeve 6504407-00/80SHA

Front lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 60mm, length 50mm, quantity per set: 2pcs fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 03.95-03.10

View part

MPBS Polyurethane suspension sleeve 6504407-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 60mm, length 50mm fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 03.95-03.10

View part

MPBS Polyurethane suspension sleeve 65044113-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 65044113-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504429-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504429-00/80SHA/16

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35mm, quantity per set: 2pcs fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 03.95-03.10

View part

MPBS Polyurethane suspension sleeve 6504429-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35mm, quantity per set: 2pcs fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 03.95-03.10

View part

MPBS Polyurethane suspension sleeve 6504429-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504493-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 6504493-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 35mm, quantity per set: 1pcs fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 03.95-03.10

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account