Partios Wholesale catalogue
Mpbs Distributor | Suspension & Steering
Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)
2,629 current catalogue lines
About the MPBS range
Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MPBS Polyurethane suspension sleeve 45035125-00/80SHA
Rear front transverse rod bushing (inner), hardness: 80 Sha, outer diameter: 39,7mm, length 47mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035125-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 39,7mm, length 47mm fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035125-00/CS
Suspension sleeve, hardness: 75 Sha, outer diameter: 39,7mm, length 47mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035126-00/80SHA
Rear upper transverse rod bushing (outer) 47mm, hardness: 80 Sha, outer diameter: 47,4mm, length 54mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035126-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 47,4mm, length 54mm fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035126-00/CS
Rear upper transverse rod bushing (outer) 47mm, hardness: 75 Sha, outer diameter: 47,4mm, length 54mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035126-39-00/80SHA
Rear upper transverse rod bushing (outer) 39mm, hardness: 80 Sha, outer diameter: 38,2mm, length 54mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035127-00/80SHA
Rear upper transverse rod bushing (inner), hardness: 80 Sha, outer diameter: 35,4mm, length 52mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035127-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 35,4mm, length 52mm fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035127-00/CS
Suspension sleeve, hardness: 75 Sha, outer diameter: 35,4mm, length 52mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035128A-00/80SHA
Front beam bushing (front), hardness: 80 Sha, outer diameter: 80mm, quantity per set: 1pcs fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3, 9-3X 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035128A-00/90SHA
Polyurethane bushing fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3, 9-3X 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035128B-00/80SHA
Front beam bushing (rear), hardness: 80 Sha, outer diameter: 80mm, quantity per set: 1pcs fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3, 9-3X 04.02-02.15
View partMPBS Polyurethane suspension sleeve 45035128B-00/90SHA
Polyurethane bushing fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3, 9-3X 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503515-00/80SHA
Rear swingarm bushings, hardness: 80 Sha, outer diameter: 70mm, length 65mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503515-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 65mm fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503515-00/CS
Rear swingarm bushing, hardness: 75 Sha, outer diameter: 70mm, length 65mm, quantity per set: 2pcs fits: FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503529A-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4503529A-00/80SHA/21
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASTRA H, ASTRA H GTC, SIGNUM, VECTRA C SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503529A-00/80SHA/24
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASTRA H, ASTRA H GTC, SIGNUM, VECTRA C SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503529A-00/80SHA/25
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 50mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASTRA H, ASTRA H GTC, SIGNUM, VECTRA C SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503529A-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4503529B-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4503529B-00/80SHA/21
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38,5mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASTRA H, ASTRA H GTC, SIGNUM, VECTRA C SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503529B-00/80SHA/24
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38,5mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASTRA H, ASTRA H GTC, SIGNUM, VECTRA C SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503529B-00/80SHA/25
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 38,5mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL ASTRA H, ASTRA H GTC, SIGNUM, VECTRA C SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503529B-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4503530-00/80SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4503530-00/80SHA/15
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37,5mm, quantity per set: 2pcs fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS 04.02-01.09
View partMPBS Polyurethane suspension sleeve 4503530-00/80SHA/17
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37,5mm, quantity per set: 2pcs fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503530-00/80SHA/18
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37,5mm, quantity per set: 2pcs fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503530-00/80SHA/19
Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 37,5mm, quantity per set: 2pcs fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-02.15
View partMPBS Polyurethane suspension sleeve 4503530-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4503549-00/80SHA
Front Swingarm bushings rear, hardness: 80 Sha, outer diameter: 62,3/70mm, length 64mm, quantity per set: 2pcs fits: CADILLAC BLS FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4503549-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 62,3/70mm, length 64mm fits: CADILLAC BLS FIAT CROMA OPEL SIGNUM, VECTRA C, VECTRA C GTS SAAB 9-3 04.02-
View partMPBS Polyurethane suspension sleeve 4504148-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 38mm, length 65mm fits: DS DS 3 / DS 3 CITROEN AMI, C4 III, C4 X OPEL CORSA F, MOKKA PEUGEOT 2008 II, 208 II 10.18-
View partMPBS Polyurethane suspension sleeve 4504148-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 38mm, length 65mm fits: DS DS 3 / DS 3 CITROEN AMI, C4 III, C4 X OPEL CORSA F, MOKKA PEUGEOT 2008 II, 208 II 10.18-
View partMPBS Polyurethane suspension sleeve 4504149-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 56,3mm, length 56mm fits: CITROEN AMI OPEL CORSA F PEUGEOT 208 II 06.19-
View partMPBS Polyurethane suspension sleeve 4504149-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 56,3mm, length 56mm fits: CITROEN AMI OPEL CORSA F PEUGEOT 208 II 06.19-
View partMPBS Polyurethane suspension sleeve 4504248-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 58,4mm, length 59mm fits: CITROEN JUMPY III, SPACETOURER OPEL VIVARO C, ZAFIRA LIFE PEUGEOT EXPERT, TRAVELLER 04.16-
View partMPBS Polyurethane suspension sleeve 4504248-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 58,4mm, length 59mm fits: CITROEN JUMPY III, SPACETOURER OPEL VIVARO C, ZAFIRA LIFE PEUGEOT EXPERT, TRAVELLER 04.16-
View partMPBS Polyurethane suspension sleeve 4504249-00/80SHA
Polyurethane bushing, hardness: 80 Sha, outer diameter: 70,4mm, length 60mm fits: CITROEN JUMPY III, SPACETOURER OPEL VIVARO C, ZAFIRA LIFE PEUGEOT EXPERT, TRAVELLER 04.16-
View partMPBS Polyurethane suspension sleeve 4504249-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 70,4mm, length 60mm fits: CITROEN JUMPY III, SPACETOURER OPEL VIVARO C, ZAFIRA LIFE PEUGEOT EXPERT, TRAVELLER 04.16-
View partMPBS Polyurethane suspension sleeve 4504249-CS
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4600448-00/80SHA
Front Swingarm bushing, hardness: 80 Sha, outer diameter: 62,5mm, quantity per set: 1pcs fits: PEUGEOT 206, 206+ 09.98-
View partMPBS Polyurethane suspension sleeve 4600448-00/90SHA
Polyurethane bushing,
View partMPBS Polyurethane suspension sleeve 4600748-00/80SHA
Front Swingarm bushing, hardness: 80 Sha, outer diameter: 56mm, length 48mm, quantity per set: 1pcs fits: CITROEN C3 III, C3 PICASSO PEUGEOT 207, 208, 208 I 02.06-
View partMPBS Polyurethane suspension sleeve 4600748-00/90SHA
Polyurethane bushing, hardness: 90 Sha, outer diameter: 56mm, length 48mm fits: CITROEN C3 III, C3 PICASSO PEUGEOT 207, 208, 208 I 02.06-
View partBuying with Partios
Buying MPBS parts through Partios
Are these genuine MPBS parts?
- Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MPBS parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.
Do you supply MPBS parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MPBS parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MPBS order?
- It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MPBS parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account