Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,629 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,629 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,629 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 08025621A-22D/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08025621B-00/80SHA

Rear lower Swingarm bushing (front), hardness: 80 Sha, outer diameter: 51,2mm, length 70mm, quantity per set: 1pcs fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 08025621B-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 51,2mm, length 70mm fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66, E67), X5 (E53) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 08025621B-22D-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08025621B-22D/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08025621C-00/80SHA

Polyurethane bushing, 1pcs, bottom/swingarm, L/R, rear, hardness: 80 Sha, 12 mm bolt hole

View part

MPBS Polyurethane suspension sleeve 08025621D-00/80SHA

Polyurethane bushing, 1pcs, bottom/swingarm, L/R, rear, hardness: 80 Sha, 14mm bolt hole

View part

MPBS Polyurethane suspension sleeve 08025622C-00/80SHA

Rear lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 51,2mm, length 65mm, quantity per set: 1pcs fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), X5 (E53) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 08025622C-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 51,2mm, length 65mm fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66, E67), X5 (E53) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 08025622D-00/80SHA

Rear lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 51,2mm, length 65mm, quantity per set: 1pcs fits: BMW 5 (E39), 5 (E60), 5 (E61), X5 (E53) 11.96-12.10

View part

MPBS Polyurethane suspension sleeve 08025622D-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 51,2mm, length 65mm fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66, E67), X5 (E53) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 0802570-00/80SHA

Rear upper Swingarm bushing, hardness: 80 Sha, outer diameter: 47mm, length 47,2mm, quantity per set: 1pcs fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 09.95-12.10

View part

MPBS Polyurethane suspension sleeve 0802570-00/90SHA

Polyurethane bushing, hardness: 90 Sha, length 47,2mm fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 09.95-12.10

View part

MPBS Polyurethane suspension sleeve 0802598-00/80SHA

Rear upper Swingarm bushing (alignment), hardness: 80 Sha, outer diameter: 45mm, length 40mm, quantity per set: 1pcs fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 0802598-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 45mm, length 40mm fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66, E67) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 0802601/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802603-00/80SHA

Polyurethane suspension bushings set, 10pcs, L/R, rear axle, hardness: 80 Sha,

View part

MPBS Polyurethane suspension sleeve 0802603/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802635-00/80SHA

Rear steering knuckle bushing, hardness: 80 Sha, outer diameter: 52mm, length 66,8mm, quantity per set: 1pcs fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 0802635-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 52mm, length 66,8mm fits: BMW 5 (E39), 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E38), 7 (E65, E66, E67), X5 (E53), Z8 (E52) 03.94-12.10

View part

MPBS Polyurethane suspension sleeve 0802653-00/80SHA

Rear trolley bushing, hardness: 80 Sha, outer diameter: 80,5mm, length 140mm, quantity per set: 1pcs fits: BMW 5 (E39) 09.95-05.04

View part

MPBS Polyurethane suspension sleeve 0802653-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 80,5mm, length 140mm fits: BMW 5 (E39) 11.96-05.04

View part

MPBS Polyurethane suspension sleeve 0802653-00/CS

Suspension sleeve, hardness: 75 Sha, outer diameter: 80,5mm, length 140mm, quantity per set: 1pcs fits: BMW 5 (E39) 11.96-05.04

View part

MPBS Polyurethane suspension sleeve 0802653K/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802653K/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802701R/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802701R/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802701X/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802701X/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802702/80SHA

Polyurethane bushing, front stabilizer/front swingarm, L/R, front axle, hardness: 80 Sha, fits: BMW 5 (E60), 5 (E61), 6 (E63), 7 (E65, E66, E67) 2.0-6.0 07.01-12.10

View part

MPBS Polyurethane suspension sleeve 0802702/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802702X/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802702X/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802704-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 70mm, length 76mm, quantity per set: 2pcs, no 4x4 fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 07.01-12.10

View part

MPBS Polyurethane suspension sleeve 0802704-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 70mm, length 76mm fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 07.01-12.10

View part

MPBS Polyurethane suspension sleeve 0802704-00/CS

Front Swingarm bushing, hardness: 75 Sha, outer diameter: 70mm, length 76mm, quantity per set: 2pcs, no 4x4 fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 07.01-12.10

View part

MPBS Polyurethane suspension sleeve 08027110-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08027110/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 08027186-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 76,5mm, length 93,6mm, quantity per set: 1pcs fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64) 12.01-12.10

View part

MPBS Polyurethane suspension sleeve 08027186-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 76,5mm, length 93,6mm, quantity per set: 1pcs fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64) 12.01-12.10

View part

MPBS Polyurethane suspension sleeve 08027187-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 76,5mm, length 95,7mm, quantity per set: 1pcs fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64) 12.01-12.10

View part

MPBS Polyurethane suspension sleeve 08027187-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 76,5mm, length 95,7mm, quantity per set: 1pcs fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64) 12.01-12.10

View part

MPBS Polyurethane suspension sleeve 0802729-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802729-00/80SHA/24

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 74mm, quantity per set: 2pcs fits: BMW 5 (E60), 6 (E63), 6 (E64), 7 (E65, E66, E67) 07.01-08.10

View part

MPBS Polyurethane suspension sleeve 0802729-00/80SHA/24,5

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 74mm, quantity per set: 2pcs fits: BMW 5 (E60), 6 (E63), 6 (E64), 7 (E65, E66, E67) 07.01-08.10

View part

MPBS Polyurethane suspension sleeve 0802729-00/80SHA/25

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 74mm, quantity per set: 2pcs fits: BMW 5 (E60), 5 (E61), 6 (E63), 6 (E64), 7 (E65, E66, E67) 07.01-12.10

View part

MPBS Polyurethane suspension sleeve 0802729-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0802729DD-00/80SHA

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 72,6mm, length 74,4mm, quantity per set: 2pcs fits: BMW 5 (E60), 5 (E61), 6 (E63) 12.01-12.10

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account