Partios Wholesale catalogue

Mpbs Distributor | Suspension & Steering

Polyurethane suspension sleeve (2,606) · Front track control arm silent block (6) · Suspension sleeve (4) · Rear suspension beam silent block (4) · Drive shaft flexible joint (4) · Rear wishbone silent block (4) · Engine bracket (2) · Wheel suspension track control arm, rear (2) · 5 further part types (6)

2,631 current catalogue lines

About the MPBS range

Mpbs’s range at Partios is suspension & steering, and it is concentrated: 2,606 of the 2,631 lines carried sit under one part type, polyurethane suspension sleeve. Behind it the largest groups are front track control arm silent block (6), suspension sleeve (4), rear suspension beam silent block (4), drive shaft flexible joint (4) and rear wishbone silent block (4). Those six account for most of the catalogue; the remaining 10 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes engine bracket, wheel suspension track control arm, rear and exhaust system hanger. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. The 2,631 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MPBS Polyurethane suspension sleeve 0300125-00/80SHA

Rear swingarm bushing, hardness: 80 Sha, outer diameter: 42mm, length 36mm, quantity per set: 1pcs fits: ALFA ROMEO 33 05.83-09.94

View part

MPBS Polyurethane suspension sleeve 0300125-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42mm, length 36mm fits: ALFA ROMEO 33 05.83-12.93

View part

MPBS Polyurethane suspension sleeve 0300126-00/80SHA

Rear transverse swingarm bushing, hardness: 80 Sha, outer diameter: 41mm, length 47mm, quantity per set: 1pcs fits: ALFA ROMEO 33 05.83-09.94

View part

MPBS Polyurethane suspension sleeve 0300126-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 41mm, length 47mm fits: ALFA ROMEO 33 05.83-12.93

View part

MPBS Polyurethane suspension sleeve 0300148-00/80SHA

Front Swingarm bushing, hardness: 80 Sha, outer diameter: 46mm, length 47mm, quantity per set: 1pcs fits: ALFA ROMEO 33 05.83-09.94

View part

MPBS Polyurethane suspension sleeve 0300148-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 46mm, length 47mm fits: ALFA ROMEO 33 05.83-12.93

View part

MPBS Polyurethane suspension sleeve 0300149-00/80SHA

Front Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 41mm, length 53mm, quantity per set: 1pcs fits: ALFA ROMEO 33 05.83-09.94

View part

MPBS Polyurethane suspension sleeve 0300149-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 41mm, length 53mm fits: ALFA ROMEO 33 05.83-12.93

View part

MPBS Polyurethane suspension sleeve 0300503/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300508-00/80SHA

Front upper swingarm bushing, hardness: 80 Sha, outer diameter: 40mm, length 35mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, 166, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300508-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40mm, length 35mm fits: ALFA ROMEO 147, 156, 166, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300514-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 40,2mm, length 30mm fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300514-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 40,2mm, length 30mm fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300514-15/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300514-15/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300515-00/80SHA

Polyurethane bushing, hardness: 80 Sha, outer diameter: 38,6mm, length 30mm fits: ALFA ROMEO 147, 156, GT 09.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300515-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 38,6mm, length 30mm fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300581-00/80SHA

Rear swingarm bushing, hardness: 80 Sha, outer diameter: 59mm, length 120mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300581-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 59mm, length 120mm fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Other elements of exhaust system 0300651-00/80SHA

Muffler hanger, polyurethane (1 piece) fits: RENAULT MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, MEGANE SCÉNIC, SCENIC I 1.9D/2.0 01.96-08.03

View part

MPBS Polyurethane suspension sleeve 0300651-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300729-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300729-00/80SHA/20

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300729-00/80SHA/21

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300729-00/80SHA/22

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300729-00/80SHA/23

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300729-00/80SHA/24

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 52mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300729-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300730B-00/80SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300730B-00/80SHA/14

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 32mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 09.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300730B-00/80SHA/16

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 32mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300730B-00/80SHA/18

Polyurethane stabilizer bushing, hardness: 80 Sha, outer diameter: 32mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300730B-00/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0300735-00/80SHA

Rear steering knuckle bushings, hardness: 80 Sha, outer diameter: 33mm, length 34mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300735-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 33mm, length 34mm fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300790-00/80SHA

Front lower Swingarm bushing outer (shock absorber), hardness: 80 Sha, outer diameter: 42,3mm, length 76mm, quantity per set: 2pcs fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0300790-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42mm, length 76mm fits: ALFA ROMEO 147, 156, GT 02.97-09.10

View part

MPBS Polyurethane suspension sleeve 0301001/80SHA

Complete suspension set - MPBS: 0301001, hardness: 80 Sha, quantity per set: 32pcs fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 0301001/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0301003/90SHA

Polyurethane bushing,

View part

MPBS Polyurethane suspension sleeve 0301007-00/80SHA

Front lower Swingarm bushing (rear), hardness: 80 Sha, outer diameter: 47,2mm, length 46mm, quantity per set: 1pcs fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 0301007-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 47,2mm, length 46mm fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 0301009-00/80SHA

Front lower Swingarm bushing, hardness: 80 Sha, outer diameter: 39mm, length 109mm, quantity per set: 1pcs, bushing fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 0301009-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 39mm, length 109mm fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 03010109-00/80SHA

Acentric front Swingarm bushing (shock absorber-mounted), hardness: 80 Sha, outer diameter: 42,5mm, length 70mm, quantity per set: 1pcs, shock absorber mounting fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 03010109-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 42,5mm, length 70mm fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 03010131-00/80SHA

Alignment rod bushings, hardness: 80 Sha, outer diameter: 32mm, length 30mm, quantity per set: 4pcs fits: ALFA ROMEO 166 09.98-06.07

View part

MPBS Polyurethane suspension sleeve 03010131-00/90SHA

Polyurethane bushing, hardness: 90 Sha, outer diameter: 32mm, length 30mm fits: ALFA ROMEO 166 09.98-06.07

View part

Buying with Partios

Buying MPBS parts through Partios

Are these genuine MPBS parts?

Yes. Every MPBS line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MPBS parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MPBS lines that aren't currently available.

Do you supply MPBS parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MPBS parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MPBS order?

It depends on the line. Stocked MPBS items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MPBS parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MPBS lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account