Partios Wholesale catalogue

Moog Distributor | Suspension & Steering

Wheel suspension track control arm, front (1,912) · Stabilizer link (1,065) · Tie rod end (1,030) · Front track control arm silent block (850) · Tie rod (with no end) (641) · Stabilizer bar bushing (619) · Front ball joint (539) · Wheel suspension track control arm, rear (515) · 43 further part types (1,105)

8,234 current catalogue lines

About the MOOG range

Partios carries 8,234 Moog lines of suspension & steering, spread across 51 part types. The largest groups are wheel suspension track control arm, front (1,912), stabilizer link (1,065), tie rod end (1,030), front track control arm silent block (850) and tie rod (with no end) (641). Beyond those, 2,159 lines are spread across 45 further part types. That tail includes front ball joint, wheel suspension track control arm, rear and rear wishbone silent block. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. A range this size, with 8,234 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MOOG Front ball joint RO-BJ-0779

Axle ball joint L/R (bottom front) (cone diameter 23,4mm) fits: LAND ROVER DISCOVERY II, RANGE ROVER II 2.5D-4.6 07.94-06.04

View part

MOOG Ball joint, rear RO-BJ-1496

Ball joint, rear L/R (bottom rear) (23mm) fits: LAND ROVER 110/127, 90 I, DEFENDER, DISCOVERY I, RANGE ROVER I 2.0-4.3 07.70-02.16

View part

MOOG Front ball joint RO-BJ-18806

Axle ball joint L (front) (cone diameter 18mm) fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MOOG Front ball joint RO-BJ-18807

Axle ball joint R (front) (cone diameter 18mm) fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MOOG Front ball joint RO-BJ-18809

Axle ball joint L/R (front) (cone diameter 20,6mm) fits: MG HS 1.5/1.5H 09.18-

View part

MOOG Front ball joint RO-BJ-18825

Axle ball joint L (bottom/outer front) (cone diameter 20mm) fits: MG MG 4, MGS5 Electric 07.22-

View part

MOOG Front ball joint RO-BJ-18826

Axle ball joint R (bottom front) (cone diameter 20mm) fits: MG MG 4 Electric 07.22-

View part

MOOG Front ball joint RO-BJ-2022

Axle ball joint (top front) (cone diameter 19,3mm) fits: JAGUAR XJ, XJ220, XJSC 2.8-6.0 09.68-09.97

View part

MOOG Front ball joint RO-BJ-3562

Axle ball joint (top front) (cone diameter 15,5mm) fits: AUSTIN METRO I FORD FIESTA VI, FOCUS II MG METRO, MGF ROVER 100, 100 / METRO 1.0-1.8D 10.80-04.17

View part

MOOG Tie rod end RO-ES-0081

Tie rod end L/R fits: AUSTIN ALLEGRO I, METRO I, MINI II INNOCENTI MINI MG METRO ROVER 100, 100 / METRO, MINI, MINI-MOKE 0.8-1.5D 09.69-05.01

View part

MOOG Tie rod end RO-ES-0545

Rover Tie Rod End

View part

MOOG Tie rod end RO-ES-0777

Tie rod end L/R fits: LAND ROVER DISCOVERY II, RANGE ROVER II 2.5D-4.6 07.94-06.04

View part

MOOG Center link RO-ES-0778

Longitudinal steering rod (L-17,8-1230mm) fits: LAND ROVER RANGE ROVER II 2.5D-4.6 07.94-03.02

View part

MOOG Tie rod end RO-ES-1492

Tie rod end L fits: LAND ROVER 110/127, 90 I, DEFENDER, DISCOVERY I, DISCOVERY II, RANGE ROVER I 2.0-4.3 07.70-02.16

View part

MOOG Tie rod end RO-ES-1494

Tie rod end R fits: LAND ROVER 110/127, 90 I, DEFENDER, DISCOVERY I, RANGE ROVER I 2.0-4.3 07.70-02.16

View part

MOOG Tie rod end RO-ES-18790

Tie rod end L/R fits: MG HS 1.5/1.5H 09.18-

View part

MOOG Tie rod end RO-ES-18791

Tie rod end L/R fits: MG MG 4 Electric 07.22-

View part

MOOG Tie rod end RO-ES-18800

Tie rod end L fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MOOG Tie rod end RO-ES-18801

Tie rod end R fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MOOG Tie rod end RO-ES-19581

Tie rod end L fits: MG MG 5 Electric 10.20-

View part

MOOG Tie rod end RO-ES-19582

Tie rod end R fits: MG MG 5 Electric 10.20-

View part

MOOG Tie rod end RO-ES-1982

Tie rod end L fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

MOOG Tie rod end RO-ES-1983

Tie rod end R fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

MOOG Tie rod end RO-ES-2034

Tie rod end L/R fits: MG MGF, TF 1.6/1.8 03.95-12.09

View part

MOOG Tie rod end RO-ES-3547

Tie rod end L/R fits: HONDA CONCERTO MG ZR ROVER 200, 200 II, 25 I, 400, 400 II, COUPE, STREETWISE 1.1-2.0D 08.89-05.05

View part

MOOG Tie rod end RO-ES-3837

Tie rod end L fits: LDV 400, CONVOY, FREIGHT ROVER SHERPA, SHERPA 1.6-3.5 01.83-04.09

View part

MOOG Stabilizer link RO-LS-1831

Stabilizer link front L/R 66mm fits: HONDA CONCERTO MG ZR ROVER 200, 200 I, 200 II, 25 I, 400, 400 II, COUPE, STREETWISE 1.1-2.0D 09.84-05.05

View part

MOOG Stabilizer link RO-LS-18510

Stabilizer link front L/R 300mm fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MOOG Stabilizer link RO-LS-18808

Stabilizer link front L/R 250mm fits: MG HS, MG 4, MGS5, MGS6 1.5/1.5H/Electric 09.18-

View part

MOOG Wheel suspension track control arm, rear RO-LS-18818

Rear axle track control arm L/R (rear) fits: MG HS 1.5/1.5H 09.18-

View part

MOOG Stabilizer link RO-LS-18820

Stabilizer link rear L/R 109mm fits: MG HS 1.5/1.5H 09.18-

View part

MOOG Stabilizer link RO-LS-18821

Stabilizer link front L 261mm fits: MG MG 4 Electric 07.22-

View part

MOOG Stabilizer link RO-LS-18822

Stabilizer link front R 261mm fits: MG MG 4 Electric 07.22-

View part

MOOG Stabilizer link RO-LS-18948

Stabilizer link front L/R 300mm fits: MG ZS 1.5H/Electric 11.21-

View part

MOOG Stabilizer link RO-LS-19029

Stabilizer link rear L 109mm fits: MG CYBERSTER, MG 4 Electric 07.22-

View part

MOOG Stabilizer link RO-LS-19030

Stabilizer link front R 109mm fits: MG CYBERSTER, MG 4 Electric 07.22-

View part

MOOG Stabilizer link RO-LS-1984

Stabilizer link rear R 105mm fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

MOOG Stabilizer link RO-LS-1985

Stabilizer link rear R 105mm fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

MOOG Stabilizer link RO-LS-1986

Stabilizer link front L/R 285mm fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

MOOG Front track control arm silent block RO-SB-18802

Front track control arm silent block in the front L/R (x12,2x39,5/65 mm) fits: MG ZS 1.0-Electric 10.17-

View part

MOOG Front track control arm silent block RO-SB-18803

Front track control arm silent block in the front L/R (x12,2x55/56,7 mm) fits: MG ZS 1.0-Electric 10.17-

View part

MOOG Front track control arm silent block RO-SB-19225

Front track control arm silent block in the back (x14,2x52/59,4 mm) fits: MG MG 4, MGS5 Electric 07.22-

View part

MOOG Front track control arm silent block RO-SB-19226

Front track control arm silent block in the front L/R (x15,6x56,8/69,6 mm) fits: MG MG 4, MGS5 Electric 07.22-

View part

MOOG Rear wishbone silent block RO-SB-19523

Track control arm silent block (behind the axle/inner rear) fits: MG HS 1.5/1.5H 09.18-

View part

MOOG Rear wishbone silent block RO-SB-19524

Track control arm silent block (behind the axle/outer rear) fits: MG HS 1.5/1.5H 09.18-

View part

MOOG Front track control arm silent block RO-SB-2840

Front track control arm silent block in the front L/R (10,2x10,2x32/50 mm) fits: HONDA CONCERTO MG ZR ROVER 200, 200 I, 200 II, 25 I, 400, 400 II, COUPE, STREETWISE 1.1-2.0D 09.84-05.05

View part

MOOG Front track control arm silent block RO-SB-5737

Front track control arm silent block in the front L (x78,5 mm) fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

MOOG Front track control arm silent block RO-SB-5738

Front track control arm silent block in the front R (x78,5 mm) fits: MG ZT, ZT- T ROVER 75, 75 I 1.8-4.6 02.99-10.05

View part

Buying with Partios

Buying MOOG parts through Partios

Are these genuine MOOG parts?

Yes. Every MOOG line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MOOG parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MOOG lines that aren't currently available.

Do you supply MOOG parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MOOG parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MOOG order?

It depends on the line. Stocked MOOG items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MOOG parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MOOG lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account