Partios Wholesale catalogue
Moog Distributor | Suspension & Steering
Wheel suspension track control arm, front (1,912) · Stabilizer link (1,065) · Tie rod end (1,030) · Front track control arm silent block (850) · Tie rod (with no end) (641) · Stabilizer bar bushing (619) · Front ball joint (539) · Wheel suspension track control arm, rear (515) · 43 further part types (1,105)
8,195 current catalogue lines
About the MOOG range
Partios carries 8,195 Moog lines of suspension & steering, spread across 51 part types. The largest groups are wheel suspension track control arm, front (1,912), stabilizer link (1,065), tie rod end (1,030), front track control arm silent block (850) and tie rod (with no end) (641). Beyond those, 2,159 lines are spread across 45 further part types. That tail includes front ball joint, wheel suspension track control arm, rear and rear wishbone silent block. The range suits workshops, suspension specialists, motor factors and exporters. Suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. A range this size, with 8,195 lines, is normally bought on fitment coverage rather than on any one part number.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MOOG Tie rod (with no end) HO-AX-2569
Tie rod (with no end) L/R (length: 220mm) fits: HONDA CR-V I 2.0 10.95-02.02
View partMOOG Tie rod (with no end) HO-AX-2589
Tie rod (with no end) L/R (length: 324,5mm) fits: HONDA HR-V 1.6 03.99-
View partMOOG Tie rod (with no end) HO-AX-2938
Tie rod (with no end) L/R (length: 179,5mm) fits: HONDA CIVIC IV, CIVIC VI, CRX II 1.2-1.6 09.87-02.01
View partMOOG Tie rod (with no end) HO-AX-3844
Tie rod (with no end) L/R (length: 500mm) fits: HONDA CIVIC VII, CIVIC VIII, STREAM 1.3H-2.2D 11.00-12.13
View partMOOG Tie rod (with no end) HO-AX-5075
Tie rod (with no end) L/R (length: 143,3mm) fits: HONDA ACCORD VII 2.0-3.0 09.02-05.08
View partMOOG Tie rod (with no end) HO-AX-5447
Tie rod (with no end) L/R (length: 161,5mm)
View partMOOG Tie rod (with no end) HO-AX-5528
Tie rod (with no end) L/R (length: 545mm) fits: HONDA CR-V II 2.0/2.2D/2.4 09.01-03.07
View partMOOG Tie rod (with no end) HO-AX-7910
Tie rod (with no end) (length: 226mm) fits: HONDA CIVIC VIII 1.4-2.2D 09.05-12.13
View partMOOG Tie rod (with no end) HO-AX-7911
Tie rod (with no end) (length: 224mm) fits: HONDA CIVIC VIII 1.3H-2.2D 09.05-12.13
View partMOOG Tie rod (with no end) HO-AX-8738
Tie rod (with no end) L/R (length: 334mm) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12
View partMOOG Front ball joint HO-BJ-0167
Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: AUDI A4 B5 HONDA CIVIC V, CIVIC VI, CR-V I, CRX III, HR-V, INTEGRA, PRELUDE V MG ZS ROVER 400 II, 45 I 1.3-2.2 10.91-
View partMOOG Front ball joint HO-BJ-10126
Axle ball joint L/R (bottom front) (cone diameter 22mm) fits: HONDA ACCORD VII, ACCORD VIII, CROSSTOUR I 2.0-3.5 01.04-
View partMOOG Front ball joint HO-BJ-10439
Axle ball joint L (bottom front) (cone diameter 20mm) fits: HONDA CIVIC VIII 1.3-1.8ALK 09.05-12.13
View partMOOG Front ball joint HO-BJ-10440
Axle ball joint R (bottom front) (cone diameter 20mm) fits: HONDA CIVIC VIII 1.3-1.8ALK 09.05-12.13
View partMOOG Front ball joint HO-BJ-10556
Axle ball joint L/R (bottom front) (cone diameter 15,5mm) fits: HONDA CR-V II 2.0/2.2D/2.4 09.01-03.07
View partMOOG Front ball joint HO-BJ-10683
Axle ball joint L/R (bottom front) fits: HONDA ACCORD VII 2.0-3.0 09.02-05.08
View partMOOG Front ball joint HO-BJ-10747
Axle ball joint L/R (bottom front) fits: HONDA CITY V, CR-Z, HR-V, INSIGHT, JAZZ II, JAZZ III 1.0H-1.6 03.99-
View partMOOG Front ball joint HO-BJ-10953
Axle ball joint (top front) (cone diameter 12,7mm) fits: HONDA ACCORD VI, ACCORD VII 1.6-3.0 12.99-05.08
View partMOOG Front ball joint HO-BJ-15282
Axle ball joint L/R (bottom front) (cone diameter 20,1mm) fits: HONDA CIVIC IX 1.4-2.4 02.12-
View partMOOG Front ball joint HO-BJ-15744
Axle ball joint L/R (bottom front) (cone diameter 17,1mm) fits: HONDA CIVIC X 1.0-2.0 09.15-
View partMOOG Front ball joint HO-BJ-16869
Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: HONDA CITY IV, HR-V, JAZZ II, JAZZ IV, JAZZ V 1.2-1.6 03.99-
View partMOOG Front ball joint HO-BJ-16903
Axle ball joint L/R (bottom front) (cone diameter 19mm) fits: HONDA CIVIC X 1.0-2.0 09.15-
View partMOOG Front ball joint HO-BJ-18173
Axle ball joint L/R (outer front) (cone diameter 17,8mm) fits: HONDA CIVIC X, CR-V V, CR-V VI, ZR-V 1.5-2.4 12.16-
View partMOOG Front ball joint HO-BJ-18329
Axle ball joint L/R (outer front) (cone diameter 17,1mm) fits: HONDA CIVIC X 2.0 06.17-12.22
View partMOOG Front ball joint HO-BJ-18441
Axle ball joint L (outer front) (cone diameter 21,6mm) fits: HONDA CR-V V 2.0H 12.18-
View partMOOG Front ball joint HO-BJ-18442
Axle ball joint R (outer front) (cone diameter 21,6mm) fits: HONDA CR-V V 2.0H 12.18-
View partMOOG Front ball joint HO-BJ-18774
Axle ball joint L/R (top front) (cone diameter 14mm) fits: HONDA ACCORD VI, ACCORD VII, ACCORD VIII, CIVIC VII, CR-V II, LEGEND IV, PRELUDE V 1.4-3.5 10.96-06.15
View partMOOG Front ball joint HO-BJ-18798
Axle ball joint L/R (bottom front) (cone diameter 15,3mm, with a nut with ball joint) fits: HONDA CIVIC X, CR-V V 1.0-2.0H 09.15-
View partMOOG Front ball joint HO-BJ-2607
Axle ball joint L/R (bottom front) (cone diameter 20mm) fits: HONDA LEGEND IV, PRELUDE V 2.0/2.2/3.5 10.96-12.12
View partMOOG Front ball joint HO-BJ-3290
Axle ball joint L/R (top front) (cone diameter 14mm) fits: HONDA ACCORD VI MITSUBISHI GALANT VIII 1.6-3.0 03.97-10.04
View partMOOG Front ball joint HO-BJ-4919
Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: HONDA CITY IV, CR-V II, CR-Z, JAZZ II 1.2-2.2D 09.01-12.13
View partMOOG Front ball joint HO-BJ-6619
Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: HONDA CIVIC IX, CIVIC VII, FR-V 1.3H-2.2D 11.00-12.16
View partMOOG Front ball joint HO-BJ-7328
Axle ball joint L/R (bottom front) (cone diameter 14,2mm) fits: HONDA LOGO 1.3 03.99-03.02
View partMOOG Front ball joint HO-BJ-8094
Axle ball joint L/R (bottom front) (cone diameter 20mm) fits: ACURA RDX HONDA CIVIC IX, CR-V III, CR-V IV, HR-V 1.5-3.5 03.99-
View partMOOG Tie rod end HO-ES-0170
Tie rod end fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III, INTEGRA MG ZS ROVER 400 II, 45 I 1.3-2.5 09.87-10.05
View partMOOG Tie rod end HO-ES-0171
Tie rod end R fits: HONDA CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA MG ZS ROVER 400 II, 45 I 1.3-2.5 10.91-10.05
View partMOOG Tie rod end HO-ES-10515
Tie rod end fits: HONDA CITY V, INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15
View partMOOG Tie rod end HO-ES-10516
Tie rod end R fits: HONDA CITY V, INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15
View partMOOG Tie rod end HO-ES-13261
Tie rod end fits: HONDA CIVIC VIII 1.3-1.8ALK 09.05-12.13
View partMOOG Tie rod end HO-ES-13262
Tie rod end R fits: HONDA CIVIC VIII 1.3H-1.8ALK 09.05-12.13
View partMOOG Tie rod end HO-ES-14809
Tie rod end fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18
View partMOOG Tie rod end HO-ES-14810
Tie rod end R fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18
View partMOOG Tie rod end HO-ES-15389
Tie rod end fits: HONDA CIVIC IX 1.4-2.4 02.12-
View partMOOG Tie rod end HO-ES-15390
Tie rod end R fits: HONDA CIVIC IX 1.4-2.4 02.12-
View partMOOG Tie rod end HO-ES-15513
Tie rod end L/R fits: HONDA CR-V II, STREAM 1.7/2.0/2.2D 05.01-09.06
View partMOOG Tie rod end HO-ES-15711
Tie rod end fits: HONDA CIVIC X 1.0-2.0 09.15-
View partMOOG Tie rod end HO-ES-15712
Tie rod end R fits: HONDA CIVIC X 1.0-2.0 09.15-
View partMOOG Tie rod end HO-ES-16732
Tie rod end L/R fits: HONDA FR-V 1.7-2.2D 08.04-12.09
View partBuying with Partios
Buying MOOG parts through Partios
Are these genuine MOOG parts?
- Yes. Every MOOG line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MOOG parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MOOG lines that aren't currently available.
Do you supply MOOG parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MOOG parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MOOG order?
- It depends on the line. Stocked MOOG items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MOOG parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MOOG lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account