Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,796 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Wheel suspension track control arm, front L69J07
Front axle track control arm L front fits: SUZUKI LIANA 1.3/1.4D/1.6 07.01-
View partMONROE Wheel suspension track control arm, front L69J08
Front axle track control arm R front fits: SUZUKI LIANA 1.3/1.4D/1.6 07.01-
View partMONROE Wheel suspension track control arm, front L69J11
Front axle track control arm R front fits: SUBARU FORESTER 2.0/2.5 02.02-12.08
View partMONROE Wheel suspension track control arm, front L69J12
Front axle track control arm L front fits: SUBARU FORESTER 2.0/2.5 02.02-12.08
View partMONROE Wheel suspension track control arm, front L69J22
Front axle track control arm R front fits: SUZUKI BALENO, SWIFT V 1.0-1.2H 02.16-
View partMONROE Wheel suspension track control arm, front L69J23
Front axle track control arm L front fits: SUZUKI BALENO, SWIFT V 1.0-1.2H 02.16-
View partMONROE Stabilizer link L69K00
Stabilizer link front L/R 350mm fits: SUZUKI SWIFT V 1.0-1.4H 01.17-
View partMONROE Stabilizer link L69K01
Stabilizer link front L/R 350mm fits: SUZUKI BALENO 1.0/1.2/1.2H 02.16-
View partMONROE Stabilizer link L69K02
Stabilizer link front L/R 112mm fits: SUZUKI CARRY 1.3 03.00-
View partMONROE Stabilizer bar bushing L69L02
Stabilizer bar bushing front L/R (25mm) fits: SUZUKI SX4 S-CROSS, VITARA 1.0-1.6D 08.13-
View partMONROE Front track control arm silent block L69L07
Track control arm silent block front L/R fits: SUZUKI IGNIS III 1.2/1.2H 02.16-08.24
View partMONROE Front track control arm silent block L69L09
Track control arm silent block L/R (in the back) fits: SUZUKI IGNIS III 1.2/1.2H 02.16-08.24
View partMONROE Rear wishbone silent block L69L15
Track control arm silent block L/R (inner front/in the front) fits: SUZUKI SWIFT V 1.0-1.4H 01.17-
View partMONROE Front ball joint L70003
Axle ball joint L/R (bottom front) (cone diameter 14mm) fits: LADA 110, 111, 112, GRANTA, KALINA, KALINA II, PRIORA, SAMARA 1.1-2.0 01.86-
View partMONROE Tie rod end L70G00
Tie rod end L fits: LADA 110, 111, 112 1.3-2.0 01.95-12.12
View partMONROE Tie rod end L70G01
Tie rod end R fits: LADA 110, 111, 112 1.3-2.0 01.95-12.12
View partMONROE Steering centre link L70I00
Steering centre link fits: LADA NIVA 1.6-1.9D 12.76-
View partMONROE Tie rod end L80100
Tie rod end L/R fits: CHRYSLER SEBRING, VOYAGER IV DODGE AVENGER, CALIBER, JOURNEY FIAT FREEMONT JEEP COMPASS, PATRIOT LANCIA FLAVIA 1.8-3.8 09.99-
View partMONROE Tie rod end L80103
Tie rod end R fits: CHRYSLER SEBRING, STRATUS 2.0-2.7ALK 12.95-06.07
View partMONROE Tie rod end L80104
Tie rod end L fits: CHRYSLER SEBRING, STRATUS 2.0-2.7ALK 12.95-06.07
View partMONROE Tie rod end L80110
Tie rod end L/R fits: CHRYSLER 300C 2.7-6.4 09.04-
View partMONROE Tie rod end L80116
Tie rod end L fits: JEEP COMMANDER, GRAND CHEROKEE III 3.0D-6.1 10.04-10.11
View partMONROE Tie rod end L80117
Tie rod end R fits: JEEP CHEROKEE 2.4-3.7 09.01-01.08
View partMONROE Tie rod end L80118
Tie rod end L fits: JEEP CHEROKEE 2.4-3.7 09.01-01.08
View partMONROE Tie rod (with no end) L80200
Tie rod (with no end) L/R (length: 297,5mm) fits: CHRYSLER VOYAGER III, VOYAGER IV 2.4-3.8 01.95-12.08
View partMONROE Tie rod (with no end) L80205
Tie rod (with no end) L/R (length: 355,5mm) fits: CHRYSLER 300C DODGE CHALLENGER 2.7-6.4 09.04-
View partMONROE Tie rod (with no end) L80207
Tie rod (with no end) L/R (length: 298mm) fits: CHRYSLER VOYAGER IV DODGE CALIBER, GRAND JEEP COMPASS, PATRIOT 1.8-3.8 02.00-
View partMONROE Front ball joint L80515
Axle ball joint L/R (top front) (cone diameter 13,5 37,4mm) fits: CHRYSLER GRAND VOYAGER III, VOYAGER III, VOYAGER IV 2.0-3.8 01.95-12.08
View partMONROE Wheel suspension track control arm, front L80518
Front axle track control arm L bottom/transverse front fits: CHRYSLER VOYAGER IV DODGE GRAND 2.4-3.8 09.99-12.08
View partMONROE Front ball joint L80520
Axle ball joint L/R (bottom front) (cone diameter 17,4 21,4mm) fits: DODGE NITRO JEEP CHEROKEE, COMMANDER, GRAND CHEROKEE III, LIBERTY 2.8D-6.1 10.04-
View partMONROE Wheel suspension track control arm, front L80521
Front axle track control arm R bottom front fits: CHRYSLER NEON II, PT CRUISER 1.6-2.4 08.99-12.10
View partMONROE Wheel suspension track control arm, front L80527
Front axle track control arm R top/transverse front 14 mm (with a joint (knuckle) with rubber pad) fits: CHRYSLER 300C DODGE CHALLENGER, CHARGER LANCIA THEMA 2.7-6.4 09.04-
View partMONROE Wheel suspension track control arm, front L80528
Front axle track control arm L top/transverse front (with a joint (knuckle) with rubber pad) fits: CHRYSLER 300C LANCIA THEMA 2.7-6.4 09.04-
View partMONROE Wheel suspension track control arm, front L80531
Front axle track control arm R bottom front fits: CHRYSLER 300C 2.7-6.4 09.04-12.23
View partMONROE Wheel suspension track control arm, front L80532
Front axle track control arm L bottom front fits: CHRYSLER 300C 2.7-6.4 09.04-12.23
View partMONROE Wheel suspension track control arm, front L80533
Front axle track control arm R front fits: DODGE CALIBER JEEP COMPASS, PATRIOT 1.8-2.4LPG 06.06-
View partMONROE Wheel suspension track control arm, front L80534
Front axle track control arm L front fits: DODGE CALIBER JEEP COMPASS, PATRIOT 1.8-2.4LPG 06.06-
View partMONROE Front ball joint L80535
Axle ball joint L/R (bottom front) (cone diameter 20mm) fits: DODGE CALIBER JEEP COMPASS, PATRIOT 1.8-2.4LPG 06.06-
View partMONROE Front ball joint L80539
Axle ball joint L/R (bottom front) (cone diameter 19,4mm) fits: CHRYSLER 300C DODGE GRAND LANCIA THEMA 2.7-6.4 09.04-
View partMONROE Wheel suspension track control arm, front L80541
Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: CHEVROLET AVEO 1.2-1.6 03.11-
View partMONROE Wheel suspension track control arm, front L80542
Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: CHEVROLET AVEO 1.2-1.6 03.11-
View partMONROE Stabilizer link L80600
Stabilizer link front L/R 310mm fits: CHRYSLER CARAVAN, GRAND VOYAGER III, GRAND VOYAGER V, PACIFICA, TOWN & COUNTRY, VOYAGER III, VOYAGER IV, VOYAGER V DODGE CARAVAN, GRAND 2.0-4.0 01.95-
View partMONROE Stabilizer link L80603
Stabilizer link front R 214mm fits: CHRYSLER 300C DODGE CHALLENGER, CHARGER LANCIA THEMA 2.7-6.4 09.04-
View partMONROE Stabilizer link L80604
Stabilizer link front L 214mm fits: CHRYSLER 300C DODGE CHALLENGER, CHARGER LANCIA THEMA 2.7-6.4 09.04-
View partMONROE Stabilizer link L80605
Stabilizer link rear L/R 119mm fits: CHRYSLER CARAVAN, GRAND VOYAGER III, VOYAGER III, VOYAGER IV 2.0-3.8 01.95-12.08
View partMONROE Stabilizer link L80609
Stabilizer link front L/R 204mm fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05
View partMONROE Stabilizer link L80610
Stabilizer link front L/R 230mm fits: JEEP COMMANDER, GRAND CHEROKEE III 3.0D-6.1 10.04-10.11
View partMONROE Stabilizer link L80613
Stabilizer link front L/R 149mm fits: JEEP CHEROKEE 2.4-3.7 09.01-01.08
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account