Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,796 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Tie rod (with no end) L52H01

Tie rod (with no end) L/R (length: 315,5mm) fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Front ball joint L52J00

Axle ball joint R (front) (cone diameter 18mm) fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MONROE Front ball joint L52J01

Axle ball joint L (front) (cone diameter 18mm) fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MONROE Front ball joint L52J02

Axle ball joint (front) (cone diameter 20,6mm) fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Front ball joint L52J03

Axle ball joint R (bottom front) (cone diameter 20mm) fits: MG MG 4 Electric 07.22-

View part

MONROE Front ball joint L52J04

Axle ball joint L (bottom front) (cone diameter 20mm) fits: MG MG 4, MGS5 Electric 07.22-

View part

MONROE Front ball joint L52J05

Axle ball joint L (front) (cone diameter 18mm) fits: MG ZS Electric 11.21-

View part

MONROE Front ball joint L52J06

Axle ball joint R (front) (cone diameter 18mm) fits: MG ZS Electric 11.21-

View part

MONROE Wheel suspension track control arm, front L52J07

Front axle track control arm R front fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MONROE Wheel suspension track control arm, front L52J08

Front axle track control arm L front fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MONROE Wheel suspension track control arm, front L52J34

Front axle track control arm R front fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Wheel suspension track control arm, front L52J35

Front axle track control arm L front fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Stabilizer link L52K00

Stabilizer link front L/R fits: MG ZS 1.0/1.5/Electric 10.17-

View part

MONROE Stabilizer link L52K01

Stabilizer link front L/R 250mm fits: MG HS, MG 4, MGS5, MGS6 1.5/1.5H/Electric 09.18-

View part

MONROE Stabilizer link L52K02

Stabilizer link rear L/R fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Stabilizer link L52K03

Stabilizer link front R 261mm fits: MG MG 4 Electric 07.22-

View part

MONROE Stabilizer link L52K04

Stabilizer link front L 261mm fits: MG MG 4 Electric 07.22-

View part

MONROE Stabilizer link L52K05

Stabilizer link front L/R fits: MG ZS 1.5H/Electric 11.21-

View part

MONROE Stabilizer link L52K06

Stabilizer link front R 109mm fits: MG CYBERSTER, MG 4 Electric 07.22-

View part

MONROE Stabilizer link L52K07

Stabilizer link rear L 109mm fits: MG CYBERSTER, MG 4 Electric 07.22-

View part

MONROE Stabilizer link L52K08

Stabilizer link rear L/R fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Front track control arm silent block L52L00

Track control arm silent block in the front (x12,2x39,5/65 mm) fits: MG ZS 1.0-Electric 10.17-

View part

MONROE Front track control arm silent block L52L01

Track control arm silent block (x12,2x55/56,7 mm) fits: MG ZS 1.0-Electric 10.17-

View part

MONROE Front track control arm silent block L52L02

Front track control arm silent block in the back fits: MG MG 4, MGS5 Electric 07.22-

View part

MONROE Front track control arm silent block L52L03

Track control arm silent block in the front fits: MG MG 4, MGS5 Electric 07.22-

View part

MONROE Rear wishbone silent block L52L04

Track control arm silent block (behind the axle/inner rear) fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Rear wishbone silent block L52L05

Track control arm silent block (behind the axle/outer rear) fits: MG HS 1.5/1.5H 09.18-

View part

MONROE Front track control arm silent block L52L08

Track control arm silent block in the front L fits: MG HS 1.5H 12.20-

View part

MONROE Tie rod end L53G04

Tie rod end R

View part

MONROE Tie rod end L53G05

Tie rod end fits: CHERY TIGGO 8 PLUS JAECOO J7 1.6/2.0 03.21-

View part

MONROE Tie rod (with no end) L53H00

Tie rod (with no end) L (length: 280mm) fits: CHERY OMODA 5, TIGGO 7 1.5/1.6/2.0 09.16-

View part

MONROE Front ball joint L53J00

Axle ball joint L/R (bottom front) (cone diameter 18mm)

View part

MONROE Wheel suspension track control arm, rear L53J01

Rear axle track control arm R fits: CHERY OMODA 5, TIGGO 8 PLUS 1.6 03.21-

View part

MONROE Stabilizer link L53K01

Stabilizer link front L/R fits: CHERY OMODA 5, TIGGO, TIGGO 3, TIGGO 4, TIGGO 5, TIGGO 7 1.5/1.6/2.0 09.10-

View part

MONROE Rear wishbone silent block L53L00

Track control arm silent block (rear)

View part

MONROE Front ball joint L65101

Axle ball joint L/R (bottom front) (cone diameter 20mm) fits: SAAB 9000 2.0/2.3/3.0 09.84-12.98

View part

MONROE Wheel suspension track control arm, front L65509

Front axle track control arm R bottom front fits: SAAB 900 II, 9-3 2.0-2.5 07.93-08.03

View part

MONROE Wheel suspension track control arm, front L65510

Front axle track control arm L bottom front fits: SAAB 900 II, 9-3 2.0-2.5 07.93-08.03

View part

MONROE Wheel suspension track control arm, front L65511

Front axle track control arm R bottom front fits: SAAB 900 II, 9-3 2.0-2.5 07.93-08.03

View part

MONROE Wheel suspension track control arm, front L65519

Front axle track control arm R bottom front 20 mm fits: SAAB 9-5 1.9D-3.0D 09.97-12.09

View part

MONROE Wheel suspension track control arm, front L65520

Front axle track control arm L bottom front 20 mm fits: SAAB 9-5 1.9D-3.0D 09.97-12.09

View part

MONROE Front ball joint L65521

Axle ball joint L/R (bottom front) (cone diameter 20mm) fits: SAAB 9-5 1.6-3.0D 09.97-01.12

View part

MONROE Front track control arm silent block L65827

Front track control arm silent block front L/R fits: SAAB 900 II, 9-3 2.0-2.5 07.93-08.03

View part

MONROE Tie rod (with no end) L65G00

Tie rod (with no end) L/R (length: 40/310mm) fits: SAAB 9000 2.0/2.3/3.0 09.84-12.98

View part

MONROE Tie rod (with no end) L65H00

Tie rod (with no end) L/R (length: 303mm) fits: SAAB 9-3 2.0/2.0ALK/2.2D 09.02-02.15

View part

MONROE Wheel suspension track control arm, rear L65J00

Rear axle track control arm L/R (bottom, rear, longitudinal) fits: SAAB 9-3 1.8-2.8 09.02-02.15

View part

MONROE Ball joint, rear L65J01

Ball joint, rear L/R fits: SAAB 9-3 1.8-2.8 09.02-02.15

View part

MONROE Stabilizer link repair kit L65L01

Link stabilizer repair kit fits: SAAB 9-5 1.9D-3.0D 09.97-12.09

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account