Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,796 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,796 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Tie rod end L43130
Tie rod end L fits: HYUNDAI ACCENT IV KIA RIO III 1.1D-1.6D 11.10-
View partMONROE Tie rod end L43131
Tie rod end R fits: HYUNDAI I40 I, I40 I CW, IX35, SONATA VI KIA CARENS IV, CARNIVAL IV, OPTIMA, SPORTAGE III 1.6-Electric 06.09-
View partMONROE Tie rod end L43132
Tie rod end L fits: HYUNDAI I40 I, I40 I CW, IX35, SONATA VI KIA CARENS IV, CARNIVAL IV, OPTIMA, SPORTAGE III 1.6-Electric 06.09-
View partMONROE Tie rod end L43133
Tie rod end R fits: HYUNDAI I10 II, I10 III 1.0/1.0LPG/1.2 08.13-
View partMONROE Tie rod end L43134
Tie rod end L fits: HYUNDAI I10 II, I10 III 1.0/1.0LPG/1.2 08.13-
View partMONROE Tie rod end L43135
Tie rod end R fits: HYUNDAI ELANTRA V, I30, VELOSTER KIA CEE'D, PRO CEE'D, SOUL II 1.0-Electric 09.10-
View partMONROE Tie rod end L43136
Tie rod end L fits: HYUNDAI ELANTRA V, I30, VELOSTER KIA CEE'D, PRO CEE'D, SOUL II 1.0-Electric 09.10-
View partMONROE Tie rod end L43141
Tie rod end R fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21
View partMONROE Tie rod end L43142
Tie rod end L fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21
View partMONROE Tie rod end L43143
Tie rod end R fits: HYUNDAI ELANTRA VI, I30, KONA KIA CEED, PROCEED, XCEED 1.0-Electric 10.15-
View partMONROE Tie rod end L43144
Tie rod end L fits: HYUNDAI ELANTRA VI, I30, KONA KIA CEED, PROCEED, XCEED 1.0-2.0 10.15-
View partMONROE Tie rod (with no end) L43208
Tie rod (with no end) L/R (length: 343mm) fits: HYUNDAI HIGHWAY, MATRIX, TRAJET, TRAJET FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.5D-2.7 09.99-08.10
View partMONROE Tie rod (with no end) L43212
Tie rod (with no end) L/R (length: 184,5mm) fits: HYUNDAI ELANTRA IV, ELANTRA V, I30 KIA CEE'D, CERATO II, CERATO KOUP II, CERATO KOUP III, PRO CEE'D 1.4-2.0LPG 06.06-
View partMONROE Tie rod (with no end) L43213
Tie rod (with no end) L/R (length: 214,6mm) fits: HYUNDAI SANTA FÉ II 2.0D-3.5 11.05-05.13
View partMONROE Tie rod (with no end) L43219
Tie rod (with no end) L/R (length: 262,5mm) fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partMONROE Tie rod (with no end) L43220
Tie rod (with no end) L/R (length: 316,5mm) fits: HYUNDAI I10 I 1.0-1.2LPG 12.07-05.18
View partMONROE Tie rod (with no end) L43221
Tie rod (with no end) L/R (length: 242mm) fits: HYUNDAI I20 I, I20 II 1.1D-1.6D 08.08-08.20
View partMONROE Tie rod (with no end) L43222
Tie rod (with no end) L/R (length: 201,7mm) fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-Electric 08.09-12.16
View partMONROE Tie rod (with no end) L43223
Tie rod (with no end) L/R (length: 308mm) fits: HYUNDAI I10 II, I10 III 1.0/1.0LPG/1.2 08.13-
View partMONROE Tie rod (with no end) L43224
Tie rod (with no end) L/R (length: 218mm) fits: HYUNDAI IX55 3.0D/3.8 01.07-12.12
View partMONROE Tie rod (with no end) L43225
Tie rod (with no end) L/R (length: 217,5mm) fits: HYUNDAI ACCENT IV KIA RIO III 1.1D-1.6D 11.10-
View partMONROE Tie rod (with no end) L43226
Tie rod (with no end) L/R (length: 234,9mm) fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-1.6D 11.11-
View partMONROE Tie rod (with no end) L43227
Tie rod (with no end) L/R (length: 187,5mm) fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17
View partMONROE Tie rod (with no end) L43228
Tie rod (with no end) L/R (length: 243mm) fits: HYUNDAI I40 I, I40 I CW 1.6/1.7D/2.0 07.11-05.19
View partMONROE Tie rod (with no end) L43233
Tie rod (with no end) L/R (length: 341mm) fits: HYUNDAI I20 ACTIVE, I20 II 1.0-1.4D 11.14-09.21
View partMONROE Tie rod (with no end) L43234
Tie rod (with no end) L/R (length: 321mm) fits: HYUNDAI ELANTRA VI, I30, IONIQ, KONA KIA CEED, NIRO, NIRO I, PROCEED, XCEED 1.0-Electric 10.15-
View partMONROE Front ball joint L43506
Axle ball joint L/R (bottom front) (cone diameter 18mm) fits: HYUNDAI ATOS 1.0/1.1 02.98-12.10
View partMONROE Wheel suspension track control arm, front L43511
Front axle track control arm R bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI ACCENT II 1.3-1.6 09.99-12.06
View partMONROE Wheel suspension track control arm, front L43512
Front axle track control arm L bottom/transverse front (with a joint (knuckle) with rubber pad) fits: HYUNDAI ACCENT II 1.3-1.6 09.99-12.06
View partMONROE Wheel suspension track control arm, front L43515
Front axle track control arm R bottom front fits: HYUNDAI ATOS 1.0/1.1 02.98-12.10
View partMONROE Wheel suspension track control arm, front L43516
Front axle track control arm L bottom/transverse front (no joint/knuckle with rubber pad) fits: HYUNDAI ATOS 1.0/1.1 02.98-12.10
View partMONROE Front ball joint L43521
Axle ball joint (front) (cone diameter 20mm) fits: HYUNDAI EQUUS / CENTENNIAL, HIGHWAY, SANTA FÉ I, SANTA FÉ II, TRAJET, TRAJET FURGON/NADWOZIE WIELKOPRZESTRZENNE 2.0-4.5 09.99-12.15
View partMONROE Front ball joint L43531
Axle ball joint L/R (bottom front) (cone diameter 20,6mm) fits: HYUNDAI SONATA IV, XG KIA MAGENTIS I 2.0-3.5 03.98-12.05
View partMONROE Front ball joint L43532
Axle ball joint (front) (cone diameter 15,2mm) fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11
View partMONROE Wheel suspension track control arm, front L43533
Front axle track control arm R bottom front fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11
View partMONROE Wheel suspension track control arm, front L43534
Front axle track control arm L bottom front fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11
View partMONROE Wheel suspension track control arm, front L43535
Front axle track control arm R bottom front fits: HYUNDAI GETZ 1.1-1.6 09.02-12.10
View partMONROE Wheel suspension track control arm, front L43536
Front axle track control arm L bottom front fits: HYUNDAI GETZ 1.1-1.6 09.02-12.10
View partMONROE Front ball joint L43537
Axle ball joint (front) fits: HYUNDAI ELANTRA IV, I30 KIA CARENS III, CEE'D, CERATO II, CERATO KOUP II, MAGENTIS II, PRO CEE'D 1.4-2.7 11.05-02.14
View partMONROE Wheel suspension track control arm, rear L43538
Rear axle track control arm L/R (transverse, rear, transverse, with a joint (knuckle) with rubber pad) fits: HYUNDAI ELANTRA IV, I30, IX35 KIA CEE'D, PRO CEE'D 1.4-Electric 09.04-12.16
View partMONROE Wheel suspension track control arm, front L43543
Front axle track control arm R bottom front fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-12.13
View partMONROE Wheel suspension track control arm, front L43544
Front axle track control arm L bottom front fits: HYUNDAI ELANTRA IV, I30 KIA CEE'D, PRO CEE'D 1.4-2.0LPG 11.05-12.13
View partMONROE Front ball joint L43545
Axle ball joint (front) (cone diameter 14,5mm) fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partMONROE Front ball joint L43547
Axle ball joint (front) fits: HYUNDAI H-1 CARGO, H-1 TRAVEL, IX35, IX55 KIA CARNIVAL II, CARNIVAL III 2.0-3.8 10.01-
View partMONROE Front ball joint L43552
Axle ball joint (front) (cone diameter 18mm) fits: HYUNDAI I40 I CW, IX35 KIA SPORTAGE III 1.6-Electric 08.09-05.19
View partMONROE Wheel suspension track control arm, front L43553
Front axle track control arm R bottom front fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partMONROE Wheel suspension track control arm, front L43554
Front axle track control arm L bottom front fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partMONROE Wheel suspension track control arm, front L43555
Front axle track control arm R bottom front fits: HYUNDAI SANTA FÉ I 2.0-2.7 08.00-03.06
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account