Partios Wholesale catalogue

Monroe Distributor | Suspension & Steering

Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)

12,626 current catalogue lines

About the MONROE range

Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,626 lines on the catalogue, most common applications in this area are covered without needing a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

MONROE Stabilizer link L40631

Stabilizer link front R 80mm fits: HONDA ACCORD VII, ACCORD VIII 2.0-3.0 09.02-06.15

View part

MONROE Stabilizer link L40632

Stabilizer link front L 80,5mm fits: HONDA ACCORD VII 2.0-3.0 09.02-05.08

View part

MONROE Stabilizer link L40633

Stabilizer link rear R 85mm fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

MONROE Stabilizer link L40634

Stabilizer link rear L 85mm fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

MONROE Stabilizer link L40635

Stabilizer link front L/R 318mm fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

MONROE Stabilizer link L40645

Stabilizer link front L/R 325mm fits: HONDA CITY V, CR-Z, INSIGHT, JAZZ III 1.0H-1.5H 04.00-

View part

MONROE Stabilizer link L40647

Stabilizer link front R 75mm fits: HONDA CIVIC VIII 1.3-1.8ALK 09.05-12.13

View part

MONROE Stabilizer link L40648

Stabilizer link front L 75mm fits: HONDA CIVIC VIII 1.3-1.8ALK 09.05-12.13

View part

MONROE Stabilizer link L40649

Stabilizer link front R 320mm fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08

View part

MONROE Stabilizer link L40650

Stabilizer link front L 320mm fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08

View part

MONROE Front track control arm silent block L40801

Front track control arm silent block in the front L/R (14x42x63 mm) fits: HONDA CIVIC VII, CR-V II, FR-V 1.3H-2.4 11.00-12.09

View part

MONROE Front track control arm silent block L40805

Front track control arm silent block in the back R fits: HONDA CITY V, INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15

View part

MONROE Front track control arm silent block L40807

Front track control arm silent block in the back L/R (14,2x80x66 mm) fits: HONDA ACCORD VIII 2.0-3.5 06.08-06.15

View part

MONROE Front track control arm silent block L40809

Front track control arm silent block in the front L/R (12,2x38x56 mm) fits: HONDA ACCORD VII, ACCORD VIII 2.0-3.5 09.02-06.15

View part

MONROE Front track control arm silent block L40810

Front track control arm silent block in the back/in the front L/R (11,3x34x48 mm) fits: HONDA CIVIC VI, CR-V I, PRELUDE V 1.4-2.2 06.95-02.02

View part

MONROE Front track control arm silent block L40812

Front track control arm silent block in the back L fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12

View part

MONROE Front track control arm silent block L40813

Front track control arm silent block in the front L/R (14,5x40,8x61 mm) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12

View part

MONROE Front track control arm silent block L40815

Front track control arm silent block in the back L/R (19,2x61x50 mm) fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08

View part

MONROE Stabilizer bar bushing L40823

Stabilizer bar bushing front L/R (19,5mm) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12

View part

MONROE Stabilizer bar bushing L40825

Stabilizer bar bushing rear outer L/R (18mm) fits: HONDA CR-V III, CR-V IV 2.0/2.2D/2.4 06.06-12.18

View part

MONROE Tie rod end L40G00

Tie rod end R fits: HONDA HR-V 1.5/1.6D/1.8 11.14-

View part

MONROE Tie rod end L40G01

Tie rod end L fits: HONDA HR-V 1.5/1.6D/1.8 11.14-

View part

MONROE Tie rod end L40G02

Tie rod end L/R fits: HONDA FR-V 1.7-2.2D 08.04-12.09

View part

MONROE Tie rod end L40G03

Tie rod end R fits: HONDA CIVIC X 1.0-2.0 09.15-

View part

MONROE Tie rod end L40G04

Tie rod end L fits: HONDA CIVIC X 1.0-2.0 09.15-

View part

MONROE Tie rod end L40G05

Tie rod end R fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

MONROE Tie rod end L40G06

Tie rod end L fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

MONROE Tie rod end L40G16

Tie rod end L fits: HONDA CR-V V 2.0H 12.18-

View part

MONROE Tie rod end L40G18

Tie rod end L fits: HONDA HR-V 1.5H 09.21-

View part

MONROE Tie rod end L40G19

Tie rod end R fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III, INTEGRA MG ZS ROVER 400 II, 45 I 1.2-2.5 09.87-10.05

View part

MONROE Tie rod end L40G20

Tie rod end L fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III, INTEGRA MG ZS ROVER 400 II, 45 I 1.2-2.5 09.87-10.05

View part

MONROE Tie rod (with no end) L40H00

Tie rod (with no end) L/R (length: 190,8mm) fits: HONDA CIVIC IX, CIVIC VII, CIVIC VIII, CIVIC X, CROSSROAD, CROSSTOUR I, PILOT 1.0-3.5 10.03-

View part

MONROE Tie rod (with no end) L40H01

Tie rod (with no end) L/R (length: 271mm) fits: HONDA JAZZ IV, JAZZ V 1.3/1.5/1.5H 09.15-

View part

MONROE Tie rod (with no end) L40H02

Tie rod (with no end) L/R (length: 212,5mm) fits: HONDA CIVIC X, CIVIC XI, ZR-V 1.0-2.0H 09.15-

View part

MONROE Tie rod (with no end) L40H03

Tie rod (with no end) L/R (length: 38/338mm) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12

View part

MONROE Tie rod (with no end) L40H07

Tie rod (with no end) L/R (length: 211mm) fits: HONDA E Electric 09.19-

View part

MONROE Tie rod (with no end) L40H08

Tie rod (with no end) L/R (length: 258mm) fits: HONDA CR-V VI 2.0H 04.23-

View part

MONROE Front ball joint L40J02

Axle ball joint (front) fits: HONDA CIVIC X 1.0-2.0 09.15-

View part

MONROE Wheel suspension track control arm, front L40J03

Front axle track control arm R front fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18

View part

MONROE Wheel suspension track control arm, front L40J04

Front axle track control arm L front fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18

View part

MONROE Wheel suspension track control arm, front L40J05

Front axle track control arm R transverse front fits: HONDA CIVIC IX 1.4-2.4 02.12-

View part

MONROE Wheel suspension track control arm, front L40J06

Front axle track control arm L front fits: HONDA CIVIC IX 1.4-2.4 02.12-

View part

MONROE Front ball joint L40J08

Axle ball joint L/R (outer front) fits: HONDA CR-V V, CR-V VI, ZR-V 1.5-2.4 12.16-

View part

MONROE Wheel suspension track control arm, front L40J09

Front axle track control arm R front fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

MONROE Wheel suspension track control arm, front L40J10

Front axle track control arm L front fits: HONDA JAZZ IV 1.3/1.5 09.15-

View part

MONROE Wheel suspension track control arm, front L40J11

Front axle track control arm R front fits: HONDA HR-V 1.5/1.6D/1.8 11.14-

View part

MONROE Wheel suspension track control arm, front L40J12

Front axle track control arm L front fits: HONDA HR-V 1.5/1.6D/1.8 11.14-

View part

MONROE Front ball joint L40J13

Axle ball joint R (bottom front) fits: HONDA CR-V III 2.0/2.2D/2.4 06.06-12.12

View part

Buying with Partios

Buying MONROE parts through Partios

Are these genuine MONROE parts?

Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MONROE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.

Do you supply MONROE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MONROE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MONROE order?

It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MONROE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account