Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,626 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,626 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Rear suspension beam silent block L38L09
Rear suspension beam silent block fits: DS DS 3 CITROEN C-ELYSEE, C3 AIRCROSS II, C3 II, C3 III, C3 PICASSO, DS3 OPEL CROSSLAND X, CROSSLAND X / CROSSLAND 1.0-1.6D 12.08-
View partMONROE Stabilizer bar bushing L38L11
Stabilizer bar bushing front L/R fits: CITROEN C2, C2 ENTERPRISE, C3 I, C3 II, C3 PLURIEL 1.1-1.6D 02.02-
View partMONROE Front track control arm silent block L38L12
Front track control arm silent block in the back L/R (x30/65 mm) fits: DS DS 7 CITROEN BERLINGO, C5 AIRCROSS FIAT DOBLO OPEL ASTRA L, COMBO, COMBO E TOUR / LIFE 1.2-Electric 05.16-
View partMONROE Stabilizer bar bushing L38L13
Stabilizer bar bushing front L/R (20,8mm) fits: DS DS 5 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4 II, DS4, DS5 PEUGEOT 308, 308 I 1.2-Electric 03.97-
View partMONROE Rear wishbone silent block L38L16
Track control arm silent block L/R (x14,6x40/42 mm) fits: DS DS 5, DS 7 CITROEN C5 AIRCROSS, C5 III, DS5 PEUGEOT 3008 I, 3008 II, 407, 508, 508 I, 508 II 1.5D-3.0D 03.04-
View partMONROE Rear wishbone silent block L38L20
L/R (top in the front/rear) fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI OUTLANDER II PEUGEOT 4007, 4008 1.6-3.0 11.06-
View partMONROE Rear suspension beam silent block L38L21
Rear suspension beam silent block L/R fits: CITROEN JUMPY II FIAT SCUDO PEUGEOT EXPERT, EXPERT TEPEE 1.6-2.0D 09.96-
View partMONROE Stabilizer bar bushing L38L24
Stabilizer bar bushing front L/R (21,5mm) fits: DS DS 3 CITROEN C3 II, DS3 PEUGEOT 2008 I 1.0-1.6D 09.09-
View partMONROE Front track control arm silent block L38L27
Track control arm silent block in the back L/R (x18,2x48/55,2 mm) fits: DS DS 3 CITROEN C3 II, C3 III, C3 PICASSO, C4 CACTUS, DS3 PEUGEOT 2008 I, 208, 208 I 1.0-1.6D 12.08-
View partMONROE Front track control arm silent block L38L35
Track control arm silent block in the back L/R (x14,2x59,7/70,3 mm) fits: CITROEN JUMPY III, SPACETOURER FIAT SCUDO, ULYSSE OPEL VIVARO C, ZAFIRA LIFE PEUGEOT EXPERT 1.5D-Electric 02.16-
View partMONROE Stabilizer bar bushing L38L43
Stabilizer bar bushing rear L/R fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI OUTLANDER II PEUGEOT 4007 1.6-3.0 11.06-
View partMONROE Rear wishbone silent block L38L47
Rear track control arm silent block L/R fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER CARGO, LANCER VII, LANCER VIII, OUTLANDER I, OUTLANDER II 1.3-3.0 06.00-
View partMONROE Stabilizer bar bushing L38L50
Stabilizer bar bushing front L/R (21mm) fits: DS DS 3 CITROEN C3 AIRCROSS II, C3 III, DS3 OPEL CROSSLAND X, CROSSLAND X / CROSSLAND PEUGEOT 207, 208, 208 I 1.0-1.6D 02.06-
View partMONROE Stabilizer bar bushing L38L52
Stabilizer bar bushing front L/R fits: CITROEN C5 II, C5 III PEUGEOT 407, 508, 508 I 1.6-3.0D 03.04-
View partMONROE Stabilizer bar bushing L38L53
Stabilizer bar bushing front L/R (25mm) fits: CITROEN JUMPER III FIAT DUCATO OPEL MOVANO C PEUGEOT BOXER 2.0D-Electric 04.06-
View partMONROE Front track control arm silent block L38L57
Track control arm silent block in the front L/R (x14,2x37/59,5 mm) fits: CITROEN C4 AIRCROSS, C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI ASX, LANCER VIII, OUTLANDER II 1.5-3.0 11.06-
View partMONROE Stabilizer link repair kit L38L58
Link stabilizer repair kit fits: CITROEN EVASION, JUMPY I FIAT DUCATO, SCUDO, ULYSSE LANCIA ZETA PEUGEOT 806, BOXER, EXPERT 1.6-2.8D 03.94-
View partMONROE Tie rod end L40105
Tie rod end R fits: HONDA CIVIC IV, CRX II 1.2-1.6 09.87-02.92
View partMONROE Tie rod end L40108
Tie rod end L fits: HONDA ACCORD IV, ACCORD V, ACCORD VI, SHUTTLE ROVER 600 I 1.6-2.3 01.90-06.04
View partMONROE Tie rod end L40109
Tie rod end R fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III, INTEGRA 1.2-2.0 09.87-02.02
View partMONROE Tie rod end L40110
Tie rod end L fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III, INTEGRA 1.2-2.0 09.87-02.02
View partMONROE Tie rod end L40111
Tie rod end R fits: HONDA ACCORD VIII 2.0-3.5 06.08-06.15
View partMONROE Tie rod end L40112
Tie rod end L fits: HONDA ACCORD VIII 2.0-3.5 06.08-06.15
View partMONROE Tie rod end L40113
Tie rod end L/R fits: HONDA CIVIC VII, CR-V II 1.3H-2.4 11.00-03.07
View partMONROE Tie rod end L40115
Tie rod end R fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08
View partMONROE Tie rod end L40116
Tie rod end L fits: HONDA CITY IV, JAZZ II 1.2-1.5 03.02-10.08
View partMONROE Tie rod end L40117
Tie rod end R fits: HONDA CIVIC VIII 1.3H-1.8ALK 09.05-12.13
View partMONROE Tie rod end L40121
Tie rod end R fits: HONDA ACCORD IX, ACCORD VII, CROSSTOUR I 2.0-3.5 09.02-
View partMONROE Tie rod end L40122
Tie rod end L fits: HONDA ACCORD IX, ACCORD VII, CROSSTOUR I 2.0-3.5 09.02-
View partMONROE Tie rod end L40123
Tie rod end R fits: HONDA CIVIC VI 1.4-2.0D 09.94-03.01
View partMONROE Tie rod end L40127
Tie rod end L/R fits: HONDA HR-V, LOGO 1.3/1.6 03.99-
View partMONROE Tie rod end L40132
Tie rod end L fits: HONDA CIVIC IX 1.4-2.4 02.12-
View partMONROE Tie rod end L40136
Tie rod end L fits: HONDA CITY V, INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15
View partMONROE Tie rod end L40137
Tie rod end L/R fits: HONDA CR-V III, CR-Z 1.5H-2.4 06.06-
View partMONROE Tie rod end L40138
Tie rod end L/R fits: HONDA CIVIC VII, CR-V II, STREAM 1.3H-2.4 11.00-03.07
View partMONROE Tie rod end L40140
Tie rod end L fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18
View partMONROE Stabilizer link L40160
Stabilizer link front L/R fits: HONDA ACCORD III, CIVIC III, CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III, PRELUDE III ROVER 400 II, 45 I 1.2-2.0D 10.83-05.05
View partMONROE Tie rod (with no end) L40203
Tie rod (with no end) L/R (length: 191,5mm) fits: HONDA CIVIC V, CIVIC VI, CRX III, INTEGRA ROVER 400 II, 45 I 1.3-2.0D 10.91-05.05
View partMONROE Tie rod (with no end) L40209
Tie rod (with no end) L/R (length: 160mm) fits: HONDA CIVIC VI 1.4-1.6 09.94-02.01
View partMONROE Tie rod (with no end) L40223
Tie rod (with no end) L/R (length: 236mm) fits: HONDA CITY V, INSIGHT, JAZZ III 1.0H-1.5 04.00-12.15
View partMONROE Tie rod (with no end) L40225
Tie rod (with no end) L/R (length: 256,5mm) fits: HONDA CR-V IV 1.6D-2.4 01.12-12.18
View partMONROE Tie rod (with no end) L40228
Tie rod (with no end) L/R (length: 201mm) fits: HONDA CIVIC IX, CIVIC VIII, CIVIC X 1.4-2.4 09.05-
View partMONROE Front ball joint L40509
Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: HONDA ACCORD IV, ACCORD V, SHUTTLE ROVER 600 I 1.8-3.5 01.90-06.04
View partMONROE Front ball joint L40511
Axle ball joint L/R (bottom front) (cone diameter 16mm) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX III, INTEGRA, PRELUDE V MG ZS ROVER 400 II, 45 I 1.3-2.0D 09.87-10.05
View partMONROE Front ball joint L40517
Axle ball joint (top front) (cone diameter 12,7 35,2mm) fits: HONDA ACCORD VI, ACCORD VII 1.6-3.0 12.99-05.08
View partMONROE Wheel suspension track control arm, front L40521
Front axle track control arm R top front fits: HONDA CR-V I 2.0 10.95-02.02
View partMONROE Wheel suspension track control arm, front L40522
Front axle track control arm L top front fits: HONDA CR-V I 2.0 10.95-02.02
View partMONROE Front ball joint L40531
Axle ball joint L/R (bottom front) (cone diameter 22mm) fits: HONDA ACCORD VII, ACCORD VIII, CROSSTOUR I 2.0-3.5 01.04-
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account