Partios Wholesale catalogue
Monroe Distributor | Suspension & Steering
Suspension shock absorber (2,747) · Coil spring (2,341) · Wheel suspension track control arm, front (1,352) · Gas spring (1,135) · Stabilizer link (786) · Tie rod end (693) · Macpherson strut mount (404) · Tie rod (with no end) (390) · 42 further part types (2,269)
12,624 current catalogue lines
About the MONROE range
Monroe is a suspension & steering brand, and the range Partios carries reaches across 50 part types. The largest groups are suspension shock absorber (2,747), coil spring (2,341), wheel suspension track control arm, front (1,352), gas spring (1,135) and stabilizer link (786). Beyond those, 3,063 lines are spread across 44 further part types. That tail includes macPherson strut mount, tie rod (with no end) and front ball joint. Buyers are typically workshops, suspension specialists, motor factors and exporters; suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. With 12,624 lines on the catalogue, most common applications in this area are covered without needing a second source.
Catalogue products
Vehicle references are indicative — confirm against the article number.
MONROE Wheel suspension track control arm, front L18533
Front axle track control arm R bottom/transverse front (no joint/knuckle with rubber pad) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15
View partMONROE Wheel suspension track control arm, front L18534
Front axle track control arm L bottom/transverse front (no joint/knuckle with rubber pad) fits: HYUNDAI SANTA FÉ II KIA SORENTO II 2.0D-3.5 11.05-12.15
View partMONROE Front ball joint L18537
Axle ball joint (front) (cone diameter 18mm) fits: HYUNDAI I10 II, I10 III KIA PICANTO II, RIO III, SOUL I 1.0-1.6LPG 02.09-
View partMONROE Stabilizer link L18604
Stabilizer link rear L/R 116mm fits: KIA SORENTO III 2.0D-3.5 01.15-12.20
View partMONROE Stabilizer link L18605
Stabilizer link front R 230mm fits: HYUNDAI I10 I KIA PICANTO I 1.0-1.2LPG 04.04-05.18
View partMONROE Stabilizer link L18606
Stabilizer link front L 230mm fits: HYUNDAI I10 I KIA PICANTO I 1.0-1.2LPG 04.04-05.18
View partMONROE Stabilizer link L18609
Stabilizer link front R 218mm fits: KIA RIO I 1.3/1.5 08.00-02.05
View partMONROE Stabilizer link L18612
Stabilizer link rear L/R 90,5mm fits: KIA CARENS I, SEPHIA, SHUMA, SHUMA I, SHUMA II 1.5-2.0D 01.92-05.07
View partMONROE Stabilizer link L18615
Stabilizer link front R 250mm fits: KIA CERATO I, CERATO IV 1.5D-2.0D 03.04-
View partMONROE Stabilizer link L18616
Stabilizer link front L 250mm fits: KIA CERATO I, CERATO IV 1.5D-2.0D 03.04-
View partMONROE Stabilizer link L18619
Stabilizer link front L/R 237mm fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partMONROE Stabilizer link L18620
Stabilizer link rear L/R 219mm fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partMONROE Stabilizer link L18623
Stabilizer link front R 85mm fits: KIA SORENTO I 2.4/2.5D/3.5 08.02-12.11
View partMONROE Stabilizer link L18624
Stabilizer link front L 85mm fits: KIA SORENTO I 2.4/2.5D/3.5 08.02-12.11
View partMONROE Stabilizer link L18625
Stabilizer link rear R 120mm fits: KIA SORENTO I 2.4-3.5 08.02-12.11
View partMONROE Stabilizer link L18626
Stabilizer link rear L 120mm fits: KIA SORENTO I 2.4-3.5 08.02-12.11
View partMONROE Stabilizer link L18630
Stabilizer link rear L/R fits: KIA CARENS III, MAGENTIS II 1.6-2.7 11.05-06.13
View partMONROE Stabilizer link L18631
Stabilizer link front L/R 241mm fits: KIA CARENS III, MAGENTIS II 1.6-2.7 11.05-06.13
View partMONROE Stabilizer link L18633
Stabilizer link front R 322mm fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15
View partMONROE Stabilizer link L18634
Stabilizer link front L 322mm fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15
View partMONROE Stabilizer link L18639
Stabilizer link front R 212mm fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14
View partMONROE Stabilizer link L18640
Stabilizer link front L 212mm fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14
View partMONROE Front track control arm silent block L18800
Front track control arm silent block in the back L/R (12,3x60,3x54,5 mm) fits: HYUNDAI I10 I KIA PICANTO I 1.0-1.2LPG 04.04-05.18
View partMONROE Front track control arm silent block L18801
Front track control arm silent block in the front L/R (12,3x33x54 mm) fits: HYUNDAI ACCENT IV, ACCENT V, I10 I, I10 II, I20 I, SOLARIS KIA PICANTO I, PICANTO II, RIO III 1.0-1.6D 04.04-
View partMONROE Tie rod end L18G02
Tie rod end R fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-
View partMONROE Tie rod end L18G03
Tie rod end L fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-
View partMONROE Tie rod end L18G04
Tie rod end R fits: HYUNDAI ACCENT V, SOLARIS KIA RIO IV, STONIC 1.0-1.6D 01.17-
View partMONROE Tie rod end L18G05
Tie rod end L fits: HYUNDAI ACCENT V, SOLARIS KIA RIO IV, STONIC 1.0-1.6D 01.17-
View partMONROE Tie rod end L18G06
Tie rod end R fits: KIA OPTIMA, SORENTO III 1.6-3.5 01.15-12.20
View partMONROE Tie rod end L18G07
Tie rod end L fits: KIA OPTIMA, SORENTO III, SPORTAGE IV 1.6-3.5 01.15-
View partMONROE Tie rod end L18G12
Tie rod end R fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17
View partMONROE Tie rod end L18G13
Tie rod end L fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17
View partMONROE Tie rod (with no end) L18H02
Tie rod (with no end) L/R (length: 322mm) fits: KIA SELTOS, SOUL III, SOUL III CARGO 1.6/2.0/Electric 01.19-
View partMONROE Tie rod (with no end) L18H03
Tie rod (with no end) L/R (length: 203,5mm) fits: KIA PICANTO III 1.0/1.0LPG/1.2 03.17-
View partMONROE Tie rod (with no end) L18H05
Tie rod (with no end) L/R (length: 264mm) fits: HYUNDAI SANTA FE IV, SANTA FE V KIA SORENTO IV 1.6H/2.2D/2.5 03.20-
View partMONROE Tie rod (with no end) L18H06
Tie rod (with no end) L/R (length: 36/202mm) fits: KIA RIO II 1.4/1.5D/1.6 03.05-12.11
View partMONROE Tie rod (with no end) L18H07
Tie rod (with no end) L/R (length: 318,5mm) fits: HYUNDAI ELANTRA VII KIA NIRO II 1.6-Electric 03.20-
View partMONROE Tie rod (with no end) L18H09
Tie rod (with no end) L/R (length: 233mm) fits: KIA CARENS IV, CARNIVAL IV 1.6-3.5 03.13-
View partMONROE Tie rod (with no end) L18H11
Tie rod (with no end) L/R (length: 295mm) fits: HYUNDAI ACCENT V, SOLARIS KIA RIO IV, STONIC 1.0-1.6D 01.17-
View partMONROE Tie rod (with no end) L18H14
Tie rod (with no end) L/R (length: 211mm) fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17
View partMONROE Tie rod (with no end) L18H15
Tie rod (with no end) L/R (length: 270,5mm) fits: KIA SORENTO III 2.0D-3.5 01.15-12.20
View partMONROE Wheel suspension track control arm, front L18J00
Front axle track control arm R front fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-
View partMONROE Wheel suspension track control arm, front L18J01
Front axle track control arm L front fits: HYUNDAI I30 KIA CEE'D, PRO CEE'D 1.0-2.0 11.11-
View partMONROE Wheel suspension track control arm, rear L18J02
Rear axle track control arm L/R (bottom, rear, transverse) fits: HYUNDAI IX35, TUCSON KIA SPORTAGE II 1.6-Electric 06.04-12.15
View partMONROE Wheel suspension track control arm, front L18J06
Front axle track control arm R top front fits: KIA SORENTO I 2.5D/3.3 08.02-12.11
View partMONROE Wheel suspension track control arm, front L18J07
Front axle track control arm L top front fits: KIA SORENTO I 2.4-3.5 08.02-12.11
View partMONROE Wheel suspension track control arm, front L18J08
Front axle track control arm L bottom front fits: KIA CARNIVAL III 2.2D/2.7/2.9D 04.06-06.15
View partMONROE Wheel suspension track control arm, front L18J10
Front axle track control arm R front fits: KIA SOUL I 1.6/1.6D/1.6LPG 02.09-12.14
View partBuying with Partios
Buying MONROE parts through Partios
Are these genuine MONROE parts?
- Yes. Every MONROE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source MONROE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MONROE lines that aren't currently available.
Do you supply MONROE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on MONROE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a MONROE order?
- It depends on the line. Stocked MONROE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for MONROE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some MONROE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account