Partios Wholesale catalogue

Misumi Wholesale | Parts

Parts of machines (40) · Linear bearing (2) · Technical seals (2) · Drive belt (2) · Pulley (2) · Industrial bearing (1) · Bearing set (1)

50 current catalogue lines

About the MISUMI range

Misumi is a multi-system brand rather than a single-product one: the range Partios carries runs to 50 lines across 7 distinct part types. The largest groups are parts of machines (40), linear bearing (2), technical seals (2), drive belt (2) and pulley (2). Those six account for most of the catalogue; the remaining 1 lines are spread across 1 further part types, so this is depth in a narrow area rather than broad coverage. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 50 lines this is a focused range rather than a full programme.

Catalogue products

MISUMI Parts of machines AJKTNMF5-40

Parts of machine (regulation bolt)

View part

MISUMI Parts of machines BGCR6802ZZ

Parts of machine (bearing in non-standard housing)

View part

MISUMI Parts of machines BPJ-N5

tłok MISUMI BPJ-N5

View part

MISUMI Parts of machines BPJ-N6

tłok MISUMI BPJ-N6

View part

MISUMI Parts of machines BPJ-N8

tłok MISUMI BPJ-N8

View part

MISUMI Parts of machines BPY3

tłok MISUMI BPY3

View part

MISUMI Parts of machines BPY4

tłok MISUMI BPY4

View part

MISUMI Parts of machines BSJ-N5

tłok MISUMI BsJ-N5

View part

MISUMI Parts of machines BSJ-N6

tłok MISUMI BSJ-N6

View part

MISUMI Parts of machines BSJ-N8

tłok MISUMI BSJ-N8

View part

MISUMI Parts of machines CFFAMG4-8

Parts of machine (pusher roller)

View part

MISUMI Parts of machines FPBTA8T-P10.00-L12-B10.0-

pin MISUMI FPBTA8T-P10.00-L12-B10.0-TC5

View part

MISUMI Parts of machines FPBTA8T-P10.00-L8-B8.TC5

pin MISUMI FPBTA8T-P10.00-L8-B8.TC5

View part

MISUMI Parts of machines FPBTD8T-P10.00-L12-B10.0-

pin MISUMI FPBTD8T-P10.00-L12-B10.0-TC5

View part

MISUMI Parts of machines FPBTD8T-P10.00-L12-B8.0-T

pin MISUMI FPBTD8T-P10.00-L12-B8.0-TC5

View part

MISUMI Parts of machines FTLNNA3-P4.5-B2-L10

pin MISUMI FTLNNA3-P4.5-B2-L10

View part

MISUMI Parts of machines FTLNND3-P4.5-B5-L10

pin MISUMI FTLNND3-P4.5-B5-L10

View part

MISUMI Technical seals FWRBA-D64-V43-T4

43x64x4 VMQ flat silicone gasket

View part

MISUMI Technical seals FWRBA-D70-V50-T4

50x70x4 VMQ flat silicone gasket

View part

MISUMI Drive belt GBN570-3GT-60

Timing toothed belt, wedge height: 2,4mm, standard length: 570mm, belt profile 3M

View part

MISUMI Bearing set HBT15

15 bearing set

View part

MISUMI Parts of machines HCCGH4-7,5

Parts of machine

View part

MISUMI Parts of machines JJPPN4-3,5 /MISUMI/

Parts of machine (mandrel, pitch: 11 mm. spring pin)

View part

MISUMI Parts of machines LHTC8

Parts of machine (line sleeve, with flange)

View part

MISUMI Linear bearing LMUDM16

Linear bearing (16x28x56mm)

View part

MISUMI Linear bearing LMUF5 /MISUMI/

Linear bearing (5x10x15mm)

View part

MISUMI Parts of machines MAC2530S MISUMI

ABSORBER MISUMI

View part

MISUMI Parts of machines MC04-9S

Parts of machine

View part

MISUMI Parts of machines NETW3 50PCS

Parts of machine (locating ring)

View part

MISUMI Parts of machines PSFAA8-68-F3-P6-M3-N5

Parts of machine (sleeve)

View part

MISUMI Parts of machines PSFPH16-176-F4P10M5T4SC20

Parts of machine (guide, D= 16 mm. L= 176 mm.)

View part

MISUMI Parts of machines PSHLH20

popychacz MISUMI PSHLH20

View part

MISUMI Parts of machines PSHPT16

popychacz MISUMI PSHPT16

View part

MISUMI Parts of machines PUSTH6-60

śruba MISUMI PUSTH6-60

View part

MISUMI Parts of machines SCSM50-22

Parts of machine (clamping flange, D= 50 mm.)

View part

MISUMI Parts of machines SCSP50-22

Parts of machine (split ring, D= 50 mm.)

View part

MISUMI Parts of machines SHFTL12

Parts of machine (shaft support, D= 12 mm.)

View part

MISUMI Parts of machines SLLM20

popychacz MISUMI SLLM20

View part

MISUMI Parts of machines TELNBA6-P10-B4-L9

pin MISUMI TELNBA6-P10-B4-L9

View part

MISUMI Parts of machines TELNBD6-P10-B4-L9

pin MISUMITELNBD6-P10-B4-L9

View part

MISUMI Parts of machines TG0301

Parts of machine (spring)

View part

MISUMI Parts of machines TT-2X-01-18H15H-15NM

Original part (clutch)

View part

MISUMI Pulley TTPA20T5100-A-C15

Pulley T5 number of tracks/teeth: 20x10 (with edges with groove for spline with guiding hole)

View part

MISUMI Pulley TTPA20T5100-A-N11

Pulley T5 number of tracks/teeth: 20x10 (with edges with groove for spline with guiding hole)

View part

MISUMI Parts of machines UMBLW10-30 MISUMI

rolka z pokryciem gumowym MISUMI

View part

MISUMI Industrial bearing UMBW3-10

3x10x3 bearing angular contact ball bearing (1pcs)

View part

MISUMI Parts of machines USTMH12

Parts of machine (mandrel)

View part

MISUMI Drive belt UWTGT5-10-55

Timing toothed belt number of teeth: 55, wedge width: 10mm, standard length: 275mm, belt profile T5, metric scale: 5mm

View part

Buying with Partios

Buying MISUMI parts through Partios

Are these genuine MISUMI parts?

Yes. Every MISUMI line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source MISUMI parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for MISUMI lines that aren't currently available.

Do you supply MISUMI parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on MISUMI parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a MISUMI order?

It depends on the line. Stocked MISUMI items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for MISUMI parts?

No. There's no minimum order value or quantity on a Partios trade account. Some MISUMI lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account