Partios Wholesale catalogue

LUK Distributor | Transmission & Driveline

Clutch assy (2,038) · Clutch disc (908) · Clutch cover (774) · Clutch release bearing (365) · Clutch master cylinder (153) · Pneumatic clutch bearing (126) · Flywheel bolt set (101) · Torsion damper (91) · 23 further part types (192)

4,765 current catalogue lines

About the LUK range

LUK is a transmission & driveline brand, and the range Partios carries reaches across 31 part types. The largest groups are clutch assy (2,038), clutch disc (908), clutch cover (774), clutch release bearing (365) and clutch master cylinder (153). Those six account for most of the catalogue; the remaining 384 lines are spread across 25 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes flywheel bolt set, torsion damper and clutch servo. Buyers are typically transmission specialists, workshops and motor factors; driveline work is high-value and usually planned, so buyers tend to source the whole job at once. The 4,765 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

LUK Torsion damper 370 0084 10

Torsion damper (diameter: 262mm, number of teeth: 14 pcs 35x40) fits: CASE IH 100 U, 100 U MAXXIMA, 1070 U, 1070 U MAXXIMA, 1080 U, 1080 U MAXXIMA, 1090 U, 1090 U MAXXIMA, 1100 U, 1100 U MAXXIMA

View part

LUK Torsion damper 370 0085 10

Torsion damper (diameter: 395mm, number of teeth: 16 pcs 31x35) fits: CASE IH 100, 110, 115, 120, 125, 130, 140 CASE-STEYR 4120 PROFI, 4130 PROFI, 4110, 4110 CLASSIC, 4120, 4130, 4130 CLASSIC

View part

LUK Torsion damper 370 0086 10

Torsion damper (diameter: 295mm, number of teeth: 26 pcs 39x42,5) fits: CLAAS 610 RX, 610 RZ, 616 RX, 616 RZ, 620 RX, 620 RZ, 626 RX, 626 RZ, 630 RX, 630 RZ, 636 RZ, 640 RZ, 656 RZ, 696 RZ

View part

LUK Torsion damper 370 0087 10

Torsion damper (diameter: 352mm, number of teeth: 22 pcs) fits: VALTRA C 100, C 110, C 120, C 120 ECOPOWER, C 130, C 150, C 90, M 120, M 120 ECOPOWER, M 130, M 150, XM 130

View part

LUK Torsion damper 370 0088 10

Torsion damper (diameter: 172mm) fits: CLAAS 546 RX, 546 RZ, 556 RX, 556 RZ, 566 RX, 616 RX, 616 RZ, 656 RZ, 696 RZ, 816 RZ, 826 RZ POWERSHIFT, 826 RZ QUADRISHIFT, 836 RZ, 426 RA, 426 RC, 426 RX

View part

LUK Torsion damper 370 0089 10

Torsion damper (diameter: 288mm) fits: JOHN DEERE 6100, 6100 D, 6100 SE, 6200, 6200 SE, 6300, 6300 SE, 6400, 6400 SE, 6500

View part

LUK Torsion damper 370 0091 10

Torsion damper (diameter: 348mm, number of teeth: 26 pcs) fits: CHALLENGER MT 455 B, MT 465 B, MT 475 B, MT 525 B MASSEY FERGUSON 5455, 5460, 5465, 5470, 5475, 5480, 6455, 6460, 6465, 6470

View part

LUK Torsion damper 370 0093 10

Torsion damper (diameter: 314mm, number of teeth: 13 pcs) fits: NEW HOLLAND 8040, 8060, 8080, 130, 200, 240

View part

LUK Torsion damper 370 0094 10

Torsion damper (diameter: 330mm, number of teeth: 16 pcs) fits: CASE IH 105 C, 105 U, 106 U, 115 U, 85 C, 95 C, 95 U CASE-STEYR 4075 KOMPAKT, 4075 KOMPAKT-ECOTECH, 4075 KOMPAKT-ECOTECH HI LO

View part

LUK Torsion damper 370 0095 10

Torsion damper (diameter: 330mm, number of teeth: 16 pcs) fits: CASE IH 55 A 4WD, 55 C, 65 A, 65 C, 75 A, 75 C CASE-STEYR 4055S KOMPAKT, 4065S KOMPAKT NEW HOLLAND T4.55 2WD, T4.55 4WD

View part

LUK Torsion damper 370 0096 10

Torsion damper śr. 213mm 23z. fits: AUDI A4 B6, A4 B7, A6 C5, A6 C6, A8 D3 2.4-3.2 02.97-08.11

View part

LUK Torsion damper 370 0097 11

Torsion damper (diameter: 348mm, number of teeth: 26 pcs) fits: MASSEY FERGUSON 2200

View part

LUK Torsion damper 370 0109 10

Torsion damper (diameter: 328mm, number of teeth: 21 pcs) fits: CLAAS 220, 230, 240, 330, 340, 350 DEUTZ FAHR 5080 D, 5080 G, 5090 D, 5090 G, 5090.4 D, 5090.4 G, 5100, 5100 C, 5100 G, 5100 P

View part

LUK Torsion damper 370 0113 10

Torsion damper (diameter: 225mm, number of teeth: 14 pcs) fits: FERRARI

View part

LUK Torsion damper 370 0115 10

Torsion damper (diameter: 133mm, number of teeth: 30 pcs) fits: MASSEY FERGUSON

View part

LUK Torsion damper 370 0116 10

Torsion damper (diameter: 328mm, number of teeth: 26 pcs) fits: DEUTZ FAHR 195, 200 MK2, 200 MK3, L 710, L 720, L 730, 7200, 7220 HUERLIMANN 115, 130 LAMBORGHINI R 5.115, R 5.130, R 7.175 S

View part

LUK Torsion damper 370 0118 10

Torsion damper (diameter: 325mm, number of teeth: 36 pcs) fits: NEW HOLLAND 8670, 8670 A, 8770, 8770 A, 8870, 8870 A, 8970, 8970 A, 170/8670, 190/8770, 210/8870, 240/8970

View part

LUK Torsion damper 370 0119 10

Torsion damper (diameter: 395mm, number of teeth: 16 pcs) fits: ZETOR 150, 160

View part

LUK Torsion damper 370 0120 10

Torsion damper (diameter: 395mm, number of teeth: 16 pcs) fits: CASE IH 120, 120 CVX, 120 PRO, 110, 110 MAXXUM, 110 X, 120 MAXXUM, 120 2WD, 120 4WD, 130 2WD, 130 4WD, 110 MAXXUM X, 110 PRO, 130

View part

LUK Torsion damper 370 0121 10

Torsion damper (diameter: 328mm, number of teeth: 18 pcs) fits: LANDINI

View part

LUK Torsion damper 370 0122 10

Torsion damper (diameter: 294mm, number of teeth: 16 pcs) fits: BCS FERRARI PASQUALI MARS ORION THOR VEGA VITHAR VOLCAN

View part

LUK Torsion damper 370 0123 10

Torsion damper (diameter: 86mm, number of teeth: 21 pcs) fits: JOHN DEERE

View part

LUK Torsion damper 370 0124 10

Torsion damper (diameter: 264mm, number of teeth: 16 pcs) fits: ZETOR 100 2WD, 100 4WD, 100 PLUS, 105 PLUS, 10541 PLUS, 110, 110 PLUS, 120, 120 PLUS, 6421, 6441, 65, 70 2WD, 70 4WD, 7421, 7441

View part

LUK Torsion damper 370 0126 10

Clutch disc/plate

View part

LUK Torsion damper 370 0127 10

Torsion damper (diameter: 348mm, number of teeth: 16 pcs 35) fits: CASE IH 140, 100, 110, 115, 120, 125, 130, 100 MAXXUM, 100 MAXXUM X, 100 PRO, 110 MAXXUM, 110 MAXXUM X, 110 PRO, 115 MAXXUM

View part

LUK Torsion damper 370 0128 10

Torsion damper (diameter: 262mm, number of teeth: 21 pcs) fits: CLAAS SAME

View part

LUK Torsion damper 370 0129 10

Torsion damper (diameter: 294mm, number of teeth: 26 pcs) fits: MASSEY FERGUSON

View part

LUK Torsion damper 370 0130 10

Torsion damper (diameter: 294mm, number of teeth: 26 pcs) fits: MASSEY FERGUSON 5709, 5710 SL DYNA 4, 5710 SL DYNA 6, 6712 R, 6713 R

View part

LUK Torsion damper 370 0131 10

Torsion damper (diameter: 354mm, number of teeth: 0 pcs) fits: CASE IH 225, 250, 280, 310, 335, 180, 200, 210, 220, 230, 240, 255

View part

LUK Torsion damper 370 0132 10

Torsion damper (diameter: 354mm) fits: CASE IH 225, 235, 250, 260, 280, 290, 310, 335, 340, 210, 230, 240, 255, 270, 285

View part

LUK Torsion damper 370 0133 10

Torsion damper (diameter: 379mm, number of teeth: 0 pcs) fits: JLG SKY TRAK

View part

LUK Torsion damper 370 0136 10

Torsion damper (diameter: 325mm, number of teeth: 24 pcs) fits: JOHN DEERE 5083EN, 5093EN, 5101EN, 5225, 5325, 5325 N, 5425, 5425N, 5525, 5525 N, 5625 MASSEY FERGUSON 5425, 5435, 5445, 5455

View part

LUK Torsion damper 370 0138 10

Torsion damper (diameter: 325mm, number of teeth: 24 pcs) fits: JOHN DEERE 5083E, 5083EN, 5085GF, 5085GN, 5085GV, 5085M, 5090G 2WD, 5090G 4WD, 5090GF 2WD, 5090GF 4WD, 5090GH 2WD, 5090GH 4WD

View part

LUK Torsion damper 370 0139 10

Torsion damper (diameter: 325mm, number of teeth: 12 pcs) fits: JOHN DEERE 5075GL, 5075GN, 5075GV, 5080G 2WD, 5080G 4WD, 5085GN, 5085GV, 5090G 2WD, 5090G 4WD, 5090GH 2WD, 5090GH 4WD, 5090GN

View part

LUK Torsion damper 370 0141 10

Torsion damper (diameter: 358mm, number of teeth: 22 pcs) fits: VALTRA A 83H, A 93H, N 103 HITECH 3, N 104 HITECH 5, N 93 HITECH 3

View part

LUK Torsion damper 370 0142 10

Torsion damper (diameter: 338mm, number of teeth: 22 pcs) fits: VALTRA N 101, N 101 HITECH, N 103, N 103 HITECH 3, N 103.4 HITECH, N 103.4 HITECH 5, N 104, N 111, N 111E, N 111E HITECH, N 113

View part

LUK Torsion damper 370 0144 10

Torsion damper (diameter: 320mm, number of teeth: 14 pcs) fits: CASE IH 105, 115, 75, 85, 95 NEW HOLLAND T5030 2WD, T5030 4WD, T5040 2WD, T5040 4WD, T5050 2WD, T5050 4WD, T5060 2WD, T5060 4WD

View part

LUK Torsion damper 370 0145 10

Torsion damper (diameter: 395mm, number of teeth: 16 pcs) fits: CASE IH 110, 115, 120, 125, 130, 135, 145 NEW HOLLAND T6.140 2WD, T6.140 4WD, T6.145, T6.150 2WD, T6.150 4WD, T6.155 2WD

View part

LUK Torsion damper 370 0149 10

Torsion damper (diameter: 263mm, number of teeth: 16 pcs) fits: CASE

View part

LUK Torsion damper 370 0152 10

Torsion damper (diameter: 123mm, number of teeth: 21 pcs) fits: CASE

View part

LUK Torsion damper 370 0153 10

Torsion damper (diameter: 340mm, number of teeth: 26 pcs) fits: JOHN DEERE

View part

LUK Torsion damper 370 0154 10

Torsion damper (diameter: 436mm) fits: CASE IH 500, 500 QUADTRAC, 540, 550, 550 QUADTRAC, 600, 600 QUADTRACK, 620 NEW HOLLAND T9.645, T9.670, T9.700

View part

LUK Clutch disc 370 0159 10

Clutch disc/plate (328mm) fits: LANDINI 5-050H TOP, 5-080H, 5-090D, 5-090D HC, 5-090H, 5-100D, 5-100D HC, 5-100H, 5-100H TOP, 5-110D, 5-110D HC, 5-110H, 5-110H TOP, 5.115H, 5-115H-TOP, 100, 110

View part

LUK Torsion damper 370 0161 10

Torsion damper (diameter: 325mm, number of teeth: 20 pcs), JOHN DEERE 4044M, 4044R, 4049M, 4052M, 4052R, 4066M, 4066R

View part

LUK Torsion damper 370 0162 10

Torsion damper (diameter: 330mm, number of teeth: 21 pcs), DEUTZ FAHR 6115C, 6125C, 6135C, 6120, 6130, 6140 LAMBORGHINI 115, 120, 125, 130, 135, 140 SAME 115, 135

View part

LUK Torsion damper 370 0167 10

Torsion damper (diameter: 348mm, number of teeth: 26 pcs) fits: CLAAS 546 RX, 546 RZ, 547 ATX, 547 ATZ, 556 RX, 556 RZ, 557 ATX, 557 ATZ, 566 RX, 567 ATX, 567 ATZ, 577 ATX, 577 ATZ, 616 RC

View part

LUK Torsion damper 370 0168 10

Torsion damper (diameter: 168mm) fits: MERCEDES U 20, U 216, U 218, U 300, U 318, U 400, U 423, U 423 L, U 427, U 427 L, U 430, U 430 L, U 500, U 5000, U 527, U 527 L, U 530, U 530 L

View part

LUK Torsion damper 370005880

Torsion damper fits: CASE

View part

Buying with Partios

Buying LUK parts through Partios

Are these genuine LUK parts?

Yes. Every LUK line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source LUK parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for LUK lines that aren't currently available.

Do you supply LUK parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on LUK parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a LUK order?

It depends on the line. Stocked LUK items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for LUK parts?

No. There's no minimum order value or quantity on a Partios trade account. Some LUK lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account