Partios Wholesale catalogue

LUK1 Distributor | Transmission & Driveline

Clutch assy (1,452) · Dual mass flywheel (703) · Gearbox bearing kit (103) · Clutch disc (29) · Clutch cover (24) · Pneumatic clutch bearing (10) · Two-plate wet clutch kit (5) · Differential assembly repair kit (4) · 5 further part types (6)

2,314 current catalogue lines

About the LUK1 range

Partios carries 2,314 LUK1 lines, almost all transmission & driveline. It has 1,452 of them under a single part type, clutch assy. Behind it the largest groups are dual mass flywheel (703), gearbox bearing kit (103), clutch disc (29), clutch cover (24) and pneumatic clutch bearing (10). Those six account for most of the catalogue; the remaining 15 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes two-plate wet clutch kit, differential assembly repair kit and clutch master cylinder + servo kit. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 2,314 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

LUK1 Clutch assy 627 3031 33

Self-adjusting clutch kit with hydraulic bearing (270mm) fits: FORD TRANSIT 3.2D 09.07-08.14

View part

LUK1 Clutch assy 627 3032 09

Self-adjusting clutch kit (270mm) fits: FORD RANGER, TRANSIT, TRANSIT V363 2.2D/3.2D 04.11-

View part

LUK1 Clutch assy 627 3032 33

Self-adjusting clutch kit (270mm) fits: FORD RANGER, TRANSIT 2.2D/2.4D/3.2D 03.04-

View part

LUK1 Clutch assy 627 3032 35

Self-adjusting clutch kit (270mm) fits: FORD TRANSIT, TRANSIT V363 2.2D 09.11-

View part

LUK1 Clutch assy 627 3040 09

Self-adjusting clutch kit (270mm) fits: FORD TRANSIT, TRANSIT V363 2.2D 09.11-

View part

LUK1 Clutch assy 627 3040 33

Self-adjusting clutch kit (270mm) fits: FORD TRANSIT, TRANSIT V363 2.2D 09.11-

View part

LUK1 Clutch assy 627 3042 09

Clutch kit with hydraulic bearing (270mm) fits: FIAT FULLBACK MITSUBISHI L200, L200 / TRITON, PAJERO SPORT III 2.2D/2.4D 11.14-

View part

LUK1 Clutch assy 627 3042 33

Self-adjusting clutch kit (270mm) fits: FIAT FULLBACK MITSUBISHI L200, L200 / TRITON, PAJERO SPORT III 2.2D/2.4D 11.14-

View part

LUK1 Clutch assy 627 3047 00

Clutch kit with bearing (270mm) fits: JEEP WRANGLER II, WRANGLER III 3.8/4.0 08.96-

View part

LUK1 Clutch assy 627 3066 09

Self-adjusting clutch kit (270mm) fits: FORD RANGER, TRANSIT V363 FORD USA RANGER 2.0D/2.0DH 03.16-

View part

LUK1 Clutch assy 627 3066 33

Self-adjusting clutch kit (270mm) fits: FORD RANGER 2.0D 03.19-

View part

LUK1 Clutch assy 627 3066 34

Self-adjusting clutch kit (270mm) fits: FORD RANGER, TRANSIT V363 2.0D 03.16-

View part

LUK1 Clutch assy 627 3082 33

Clutch kit with hydraulic bearing (270mm) fits: MAXUS DELIVER 9 2.0D 07.20-

View part

LUK1 Clutch assy 628 2763 60

Clutch kit with bearing (280mm) fits: TOYOTA LAND CRUISER 80 4.2D 01.90-12.97

View part

LUK1 Clutch assy 628 3040 60

Clutch kit with bearing (280mm) fits: ISUZU TROOPER III OPEL MONTEREY B 3.0D 05.98-08.04

View part

LUK1 Clutch assy 628 3133 00

Self-adjusting clutch kit with bearing (280mm) fits: KIA SORENTO I 2.5D 05.06-12.11

View part

LUK1 Clutch assy 628 3166 00

Clutch kit (280mm) fits: HYUNDAI H-1, H-1 CARGO, H-1 TRAVEL 2.5D 07.01-

View part

LUK1 Clutch assy 628 3166 09

Clutch kit (280mm) fits: HYUNDAI H-1, H-1 CARGO, H-1 TRAVEL 2.5D 07.01-

View part

LUK1 Clutch assy 628 3171 00

Clutch kit with bearing (280mm) fits: TOYOTA HIACE / COMMUTER V, HIACE V, LAND CRUISER PRADO 3.0D 09.02-

View part

LUK1 Clutch assy 628 3221 00

Clutch kit with bearing (280mm) fits: TOYOTA LAND CRUISER PRADO 3.0D 09.02-12.10

View part

LUK1 Clutch assy 628 3228 00

Clutch kit with bearing (280mm) fits: DODGE NITRO JEEP WRANGLER III 2.8D 04.07-

View part

LUK1 Clutch assy 628 3260 00

Clutch kit with bearing (280mm) fits: MITSUBISHI CANTER VI (FE5, FE6, FB5, FB6) 3.3D 07.86-

View part

LUK1 Clutch assy 628 3307 00

Clutch kit (280mm) fits: TOYOTA LAND CRUISER, LAND CRUISER PRADO 2.8D/3.0D 08.09-

View part

LUK1 Clutch assy 628 3319 00

Clutch kit (280mm) fits: FUSO (MITSUBISHI) CANTER VII (FB7_, FE7_, FB8_, FE8_) MITSUBISHI CANTER VI (FE5, FE6, FB5, FB6) 3.0D/3.9D 08.96-

View part

LUK1 Clutch assy 628 3320 00

Clutch kit (280mm) fits: NISSAN PATROL GR V 3.0D 05.00-

View part

LUK1 Clutch assy 628 3333 00

Clutch kit with bearing (280mm) fits: TOYOTA HILUX VII 2.5D/3.0D 03.05-09.15

View part

LUK1 Clutch assy 628 3344 00

Clutch kit (280mm) fits: MITSUBISHI PAJERO IV 3.2D 02.07-

View part

LUK1 Clutch assy 628 3349 00

Clutch kit with bearing (277mm) fits: ISUZU D-MAX II 1.9D/2.5D 04.12-

View part

LUK1 Clutch assy 628 3390 00

Clutch kit with bearing (280mm) fits: MITSUBISHI PAJERO CLASSIC, PAJERO II, PAJERO III, PAJERO IV 3.2D 04.00-

View part

LUK1 Clutch assy 628 3393 00

Clutch kit with bearing (280mm) fits: ISUZU D-MAX I 3.0D 01.07-06.12

View part

LUK1 Clutch assy 628 3394 00

Clutch kit with bearing (280mm) fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D 01.05-

View part

LUK1 Clutch assy 628 3420 00

Self-adjusting clutch kit (with thrust bearing, 280mm) fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D 01.05-

View part

LUK1 Clutch assy 628 3424 09

Clutch kit (pressure plate + disc, 275mm) fits: FUSO (MITSUBISHI) CANTER VIII (FEA_, FEB_, FEC_, FGB_) 3.0D 06.13-

View part

LUK1 Clutch assy 628 3585 00

Self-adjusting clutch kit (276mm) fits: TOYOTA HILUX VIII 2.4D/2.8D 05.15-

View part

LUK1 Clutch assy 628 3585 00 WYP

Self-adjusting clutch kit (damaged no bearing, 276mm) fits: TOYOTA HILUX VIII 2.4D/2.8D 05.15-

View part

LUK1 Clutch assy 628203660

Clutch kit with bearing (280mm)

View part

LUK1 Clutch assy 628319300

Clutch kit with bearing (280mm)

View part

LUK1 Clutch assy 628326300

Clutch kit (280mm)

View part

LUK1 Clutch assy 628330000

Clutch kit (280mm)

View part

LUK1 Clutch assy 630 2734 09

Self-adjusting clutch kit (300mm) fits: TOYOTA LAND CRUISER 80 4.5 08.92-12.97

View part

LUK1 Clutch assy 630 3030 60

Clutch kit with bearing (300mm) fits: TOYOTA LAND CRUISER 100 4.2D 01.98-08.07

View part

LUK1 Clutch assy 630 3106 09

Self-adjusting clutch kit (300mm)

View part

LUK1 Clutch assy 630 3146 00

Clutch kit (300mm) fits: FUSO (MITSUBISHI) CANTER VII (FB7_, FE7_, FB8_, FE8_) MITSUBISHI CANTER VI (FE5, FE6, FB5, FB6) 3.9D 10.95-

View part

LUK1 Clutch assy 631 3123 10

Clutch kit (with thrust bearing) 310mm

View part

LUK1 Clutch assy 635 3513 19

Clutch kit 350mm fits: NEW HOLLAND TB 100 MEXICO, TB 110 MEXICO, TB 120 MEXICO, TB 80 MEXICO, TB 85 MEXICO, TB 90 MEXICO, 6000

View part

LUK1 Clutch assy 635 3552 09

Clutch kit 350mm

View part

LUK1 Clutch assy 636 3045 00

Clutch kit (362mm)

View part

LUK1 Clutch assy 636 3053 00

Double disc clutch set (360mm)

View part

Buying with Partios

Buying LUK1 parts through Partios

Are these genuine LUK1 parts?

Yes. Every LUK1 line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source LUK1 parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for LUK1 lines that aren't currently available.

Do you supply LUK1 parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on LUK1 parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a LUK1 order?

It depends on the line. Stocked LUK1 items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for LUK1 parts?

No. There's no minimum order value or quantity on a Partios trade account. Some LUK1 lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account