Partios Wholesale catalogue

LUK1 Distributor | Transmission & Driveline

Clutch assy (1,452) · Dual mass flywheel (703) · Gearbox bearing kit (103) · Clutch disc (29) · Clutch cover (24) · Pneumatic clutch bearing (10) · Two-plate wet clutch kit (5) · Differential assembly repair kit (4) · 5 further part types (6)

2,314 current catalogue lines

About the LUK1 range

Partios carries 2,314 LUK1 lines, almost all transmission & driveline. It has 1,452 of them under a single part type, clutch assy. Behind it the largest groups are dual mass flywheel (703), gearbox bearing kit (103), clutch disc (29), clutch cover (24) and pneumatic clutch bearing (10). Those six account for most of the catalogue; the remaining 15 lines are spread across 7 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes two-plate wet clutch kit, differential assembly repair kit and clutch master cylinder + servo kit. The range suits transmission specialists, workshops and motor factors. Driveline work is high-value and usually planned, so buyers tend to source the whole job at once. 2,314 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

LUK1 Clutch assy 600 0398 00

Self-adjusting clutch kit with dual-mass flywheel (240mm) fits: HYUNDAI IX35 KIA SPORTAGE III 2.0D 08.09-12.16

View part

LUK1 Clutch assy 600 0402 00

Self-adjusting clutch kit with dual-mass flywheel (240mm) fits: SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON VW CADDY III, CADDY III FURGON/NADWOZIE WIELKOPRZESTRZENNE, EOS, GOLF PLUS V 2.0D 03.04-12.22

View part

LUK1 Clutch assy 600 0406 00

Self-adjusting clutch kit with dual-mass flywheel (240mm) fits: SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON VW CADDY III, CADDY III FURGON/NADWOZIE WIELKOPRZESTRZENNE, EOS, GOLF PLUS V 2.0D 03.04-

View part

LUK1 Clutch assy 600 0409 00

Self-adjusting clutch kit with dual-mass flywheel (240mm) fits: FIAT BRAVO, BRAVO II, DOBLO, DOBLO CARGO LANCIA DELTA III OPEL COMBO TOUR 1.6D 09.07-

View part

LUK1 Clutch assy 600 0410 00

Self-adjusting clutch kit with dual-mass flywheel (260mm) fits: HYUNDAI SANTA FÉ II 2.2D 11.05-12.12

View part

LUK1 Clutch assy 600 0411 00

Clutch kit (200mm) fits: ALFA ROMEO MITO FIAT 500, 500 C, 500L, PANDA, PUNTO LANCIA YPSILON 0.9-1.0H 09.09-

View part

LUK1 Clutch assy 600 0412 00

Clutch kit with dual mass flywheel and hydraulic bearing (disc + pressure plate with thrust bearing, 273mm) fits: FORD TRANSIT, TRANSIT V363 2.0D/2.4D 03.04-

View part

LUK1 Clutch assy 600 0415 00

Clutch kit (with thrust bearing, 275mm) fits: NISSAN NAVARA NP300, PATHFINDER III 2.5D 01.05-

View part

LUK1 Clutch assy 600 0417 00

Clutch kit (with central clutch slave cylinder, 250mm) fits: NISSAN QASHQAI +2, QASHQAI I, QASHQAI III, TIIDA, X-TRAIL, X-TRAIL II RENAULT CLIO III, KOLEOS I, LAGUNA III 1.3H-2.0D 09.04-

View part

LUK1 Clutch assy 600 0420 00

Self-adjusting clutch kit with dual-mass flywheel (225mm) fits: NISSAN QASHQAI +2, QASHQAI I, X-TRAIL II 2.0 02.07-07.14

View part

LUK1 Clutch assy 600 0421 00

Clutch kit with dual mass flywheel and hydraulic bearing (disc + pressure plate with thrust bearing, 260mm) fits: MERCEDES SPRINTER 3,5-T (B907), SPRINTER 3,5-T (B907 2.0D/2.2D/3.0D 02.18-

View part

LUK1 Clutch assy 600 0423 00

Clutch kit (with thrust bearing, 230mm) fits: DS DS 3 CITROEN BERLINGO MULTISPACE, C3 AIRCROSS II, C3 II, C3 III, C3 PICASSO, C4 CACTUS, C4 II, DS3 OPEL CROSSLAND X / CROSSLAND 1.2 01.13-

View part

LUK1 Clutch assy 600 0424 00

Self-adjusting clutch kit with dual-mass flywheel (with thrust bearing, 230mm) fits: MINI (R56), CLUBMAN (R55) 1.6D 11.06-09.10

View part

LUK1 Clutch assy 600 0427 00

Clutch kit (with bolts: yes, with central clutch slave cylinder with dual mass flywheel, 240mm) fits: AUDI A3, Q3, TT SEAT ALTEA XL, LEON SKODA OCTAVIA II, SUPERB II, YETI 1.8/2.0 09.04-12.17

View part

LUK1 Clutch assy 600 0428 00

Clutch kit with dual mass flywheel and hydraulic bearing (240mm) fits: AUDI Q3 SEAT ALHAMBRA VW SHARAN, TIGUAN 1.4 05.08-12.22

View part

LUK1 Clutch assy 600 0429 00

Clutch kit with dual mass flywheel and hydraulic bearing (disc + pressure plate with thrust bearing, 225mm) fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN TOURER (W420) 1.3/1.5D/2.0D 10.03-

View part

LUK1 Clutch assy 600 0431 00

Self-adjusting clutch kit with dual-mass flywheel (240mm) fits: AUDI A3, TT SEAT ALHAMBRA, ALTEA, ALTEA XL, LEON, LEON SC, LEON ST SKODA OCTAVIA III VW CADDY III 2.0D 03.04-

View part

LUK1 Clutch assy 600 0433 00

Clutch kit with dual mass flywheel and hydraulic bearing (disc + pressure plate with thrust bearing, 225mm) fits: DACIA DUSTER, LODGY 1.2/1.3/1.5D 06.10-

View part

LUK1 Clutch assy 600 0440 00

Clutch kit with dual mass flywheel and hydraulic bearing fits: FORD GALAXY III, MONDEO V, S-MAX 2.0D 09.14-03.22

View part

LUK1 Clutch assy 600 0441 00

Self-adjusting clutch set with dual mass flywheel and hydraulic bearing (215mm) fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C 1.4 08.08-

View part

LUK1 Clutch assy 600 0442 00

Clutch kit with dual mass flywheel and hydraulic bearing (with bolts: yes) fits: FORD GALAXY III, MONDEO V, S-MAX 2.0D 09.14-03.22

View part

LUK1 Clutch assy 600 0443 00

Clutch kit with dual mass flywheel and bearing (with bolts: yes, 220mm) fits: MINI (F55), (F56), (F57) 1.5 12.13-

View part

LUK1 Clutch assy 600 0445 00

(with bolts: yes, 228mm) fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (A207), E (C207), E T-MODEL (S212), E (W212), GLK (X204), SLK (R172) 2.2D 08.08-

View part

LUK1 Clutch assy 600 0446 00

Clutch kit with dual mass flywheel and bearing (228mm) fits: BMW 1 (F40), 2 (F45), 2 GRAN TOURER (F46) MINI CLUBMAN (F54), COUNTRYMAN (F60) 1.5 07.15-

View part

LUK1 Clutch assy 600 0450 00

Self-adjusting clutch set with dual mass flywheel and hydraulic bearing (216mm) fits: ABARTH 500 / 595 / 695, 500C / 595C / 695C 1.4 08.08-

View part

LUK1 Clutch assy 600004100

Clutch kit (with bolts: yes, 230mm)

View part

LUK1 Clutch assy 601 0003 00

Clutch kit fits: CHRYSLER CIRRUS, NEON, NEON II, SEBRING, STRATUS DODGE NEON, NEON II, STRATUS PLYMOUTH BREEZE, NEON, NEON II 1.6-2.5 01.94-

View part

LUK1 Clutch assy 601 0006 00

Clutch kit with rigid wheel and release bearing (240mm) fits: CHRYSLER VOYAGER III 2.0 01.95-03.01

View part

LUK1 Clutch assy 601 0010 00

Clutch kit (215mm)

View part

LUK1 Clutch assy 601 0010 09

Self-adjusting clutch kit

View part

LUK1 Clutch assy 601 0026 00

Clutch kit with rigid flywheel fits: DODGE CALIBER 1.8 06.06-12.09

View part

LUK1 Clutch assy 601 0029 00

Self-adjusting clutch kit (240mm) fits: CHRYSLER PT CRUISER 2.0/2.4 06.00-12.10

View part

LUK1 Clutch assy 601 0053 00

Self-adjusting clutch kit (260mm) fits: LAND ROVER DEFENDER 2.2D/2.4D 10.06-02.16

View part

LUK1 Clutch assy 601000400

Clutch kit with rigid wheel and release bearing (215mm)

View part

LUK1 Clutch assy 602 0001 00

Dual-plate clutch kit with bearing fits: AUDI A1, A3 SEAT ALTEA, ALTEA XL, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO III SKODA FABIA II, OCTAVIA II, ROOMSTER, SUPERB II 1.2-2.0 05.03-05.22

View part

LUK1 Clutch assy 602 0001 00 WYP2

Dual-plate clutch kit with bearing (missing elements marked on the photo) fits: AUDI A1, A3 SEAT ALTEA, ALTEA XL, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO III 1.2-2.0 05.03-05.22

View part

LUK1 Clutch assy 602 0001 00 WYP3

Dual-plate clutch kit with bearing (damaged Dual clutch transmission missing elements marked on the photo With clutch cover with clutch plate With clutch slave cylinder lever with thrust bearing

View part

LUK1 Clutch assy 602 0002 00

Dual-plate clutch kit with bearing fits: AUDI A1, A3 SEAT ALTEA, ALTEA XL, LEON SKODA OCTAVIA II, SCALA VW CADDY III, CADDY III FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF PLUS 1.5/1.6D/1.9D 08.03-

View part

LUK1 Clutch assy 602 0003 00

Dual-plate clutch kit with bearing fits: ALFA ROMEO GIULIETTA, MITO FIAT 500X JEEP RENEGADE 1.4 09.09-

View part

LUK1 Clutch assy 602 0004 00

Dual-plate clutch kit with bearing (Dry clutch for TCT automatic transmission) fits: ALFA ROMEO 4C, 4C SPIDER, GIULIETTA FIAT 500X, TIPO JEEP RENEGADE SUZUKI SX4 S-CROSS 1.6D/1.8/2.0D 04.10-

View part

LUK1 Clutch assy 602 0005 00

Dual-plate clutch kit with bearing fits: DACIA DUSTER RENAULT CAPTUR I, CLIO IV, FLUENCE, GRAND SCENIC III, KADJAR, KANGOO EXPRESS, KANGOO II, LAGUNA, LAGUNA III, LATITUDE, MEGANE 1.2/1.5D 10.07-

View part

LUK1 Clutch assy 602 0006 00

Clutch kit (Dual clutch transmission With clutch cover with clutch plate) fits: AUDI A1, A1 ALLSTREET, A1 CITY CARVER, A3, Q2, TT SEAT ALTEA, ALTEA XL, ARONA, ATECA, IBIZA IV 1.0-2.5 05.03-

View part

LUK1 Clutch assy 602 0006 00 WYP

Clutch kit with bearing (no coupling system only clutch and bearing) fits: AUDI A1, A3, Q2, TT SEAT ALTEA, ALTEA XL, ARONA, ATECA, IBIZA IV, IBIZA IV SC, IBIZA IV ST, IBIZA V 1.0-1.8 05.03-

View part

LUK1 Clutch assy 602 0007 00

Dual-plate clutch kit with bearing fits: AUDI A1, A3, Q2 SEAT ALTEA, ALTEA XL, ARONA, ATECA, IBIZA IV, IBIZA IV SC, IBIZA IV ST, IBIZA V, LEON, LEON SC, LEON ST, TOLEDO IV 1.5/1.6D/2.0D 02.09-

View part

LUK1 Clutch assy 602 0008 00

Dual-plate clutch kit with bearing fits: FORD B-MAX, ECOSPORT, FIESTA VI, FOCUS III 1.5/1.6/2.0 07.10-02.20

View part

LUK1 Clutch assy 602 0012 00

Dual-plate clutch kit with bearing (125mm) fits: HYUNDAI VELOSTER KIA CEE'D, PRO CEE'D 1.6 03.11-07.18

View part

LUK1 Clutch assy 602 0013 00

Dual-plate clutch kit with bearing fits: RENAULT CAPTUR I, CLIO IV, LATITUDE, MEGANE III, MEGANE IV 1.2/1.5D/1.6 01.13-

View part

LUK1 Clutch assy 602 0014 00

Dual-plate clutch kit with bearing fits: FORD FIESTA VI 1.0 01.13-04.17

View part

Buying with Partios

Buying LUK1 parts through Partios

Are these genuine LUK1 parts?

Yes. Every LUK1 line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source LUK1 parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for LUK1 lines that aren't currently available.

Do you supply LUK1 parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on LUK1 parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a LUK1 order?

It depends on the line. Stocked LUK1 items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for LUK1 parts?

No. There's no minimum order value or quantity on a Partios trade account. Some LUK1 lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account