Partios Wholesale catalogue

Kalgum Supplier | Parts

Spring washer (61) · Suspension sleeve (56) · Stabilizer link (36) · Joint repair kit (21) · Fender widening (14)

187 current catalogue lines

About the KALGUM range

The Kalgum range at Partios is broad rather than specialised. It has 187 lines spanning 5 part types across several vehicle systems. The largest groups are spring washer (61), suspension sleeve (56), stabilizer link (36), joint repair kit (21) and fender widening (14). That is the complete range. Five part types in total. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. With 187 lines, it is a targeted range rather than a wide one. Wholesale pricing on the full Kalgum range shows once a trade account is approved.

Catalogue products

Vehicle references are indicative — confirm against the article number.

KALGUM Spring washer KG-000590-001

Spring washer rear, height: 30mm, height 2: 30mm, 2pcs, universal

View part

KALGUM Joint repair kit KPLUSZCZKULIJIMNY

SUZUKI JIMNY kpl. uszczelniaczy kuli kpl. składa sie z - gumowy uszczelniacz kuli - simmering (uszczelniacz półosi) - 2 łożyska zwrotnicy - blachy mocujące

View part

KALGUM Joint repair kit KPLUSZCZKULISAMURAI

KOMPLET USZCZELNIACZY KULI DO SUZUKI SAMURAI, W zestawie: uszczelniacz kuli (dwuczęściowy). 2 łożyska, simering

View part

KALGUM Joint repair kit KPLUSZCZKULIY60

Nissan Patrol Y60 , komplet uszczelniaczy zwrotnicy (mała kula),W zestawie: uszczelniacz kuli 1 kpl, uszczelniacz półosi 1 szt, łożysko stożkowe 2 szt, uszczelniacz łożyska zwrotnicy.

View part

KALGUM Joint repair kit KPLUSZCZKULIY61L

Joint repair kit (large ball left knuckle set of oil seals) fits: NISSAN PATROL GR V 2.8D-4.8 06.97-

View part

KALGUM Joint repair kit KPLUSZCZKULIY61P

Joint repair kit (large ball right knuckle set of oil seals) fits: NISSAN PATROL GR V 2.8D-4.8 06.97-

View part

KALGUM Spring washer ODB6-110/90

Spring washer, fits: NISSAN PATROL GR IV, PATROL GR V 2.8 TD/2.8 TD (Y60A)/2.8 TDiC (Y61)/3.0 DTi/4.2/4.2 Cat/4.2 D (CRGY60, KY60, KRY60, WRGY60)/4.2 TD/4.8i 24V 09.88-

View part

KALGUM Suspension sleeve P1-1

Suspension sleeves, 10pcs, fitting position: front/rear, swingarm, hardness: 80 Sha fits: SUZUKI VITARA

View part

KALGUM Suspension sleeve P10/2-1

Suspension sleeves, 32pcs, fitting position: front/rear, hardness: 80 Sha (set) fits: NISSAN TERRANO II

View part

KALGUM Suspension sleeve P10/2-2

Suspension sleeves, 4pcs, fitting position: front/rear, Panhard rod, hardness: 80 Sha (set) fits: NISSAN TERRANO II

View part

KALGUM Suspension sleeve P10/2-3

Suspension sleeves, 8pcs, fitting position: rear, swingarm, hardness: 80 Sha (set) fits: NISSAN TERRANO II

View part

KALGUM Suspension sleeve P10/2-4

Polyurethane Track control arm bushings, fitting position: front, hardness: 80 Sha (grease for free) fits: NISSAN TERRANO II 2.4-3.3 10.92-09.07

View part

KALGUM Suspension sleeve P10/2-5

Polyurethane stabilizer link and stabilizer bushings, fitting position: front/rear, hardness: 80 Sha (grease for free) fits: NISSAN TERRANO II 2.4-3.3 10.92-09.07

View part

KALGUM Suspension sleeve P13-1

Suspension sleeves, 34pcs, fitting position: front/rear, set, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-1/1

Suspension sleeves, 22pcs, fitting position: front, set, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-1/2

Suspension sleeves, 12pcs, fitting position: rear, set, hardness: 80 Sha fits: JEEP

View part

KALGUM Suspension sleeve P13-292

Suspension sleeves, 1pcs, fitting position: front, swingarm, Top, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-3

Suspension sleeves, 34pcs, fitting position: front/rear, set, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-3/1

Suspension sleeves, 22pcs, fitting position: front, set, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-3/2

Suspension sleeves, 12pcs, fitting position: rear, set, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-53

Suspension sleeves, 1pcs, fitting position: front/rear, swingarm, Bottom, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-54

Suspension sleeves, 1pcs, fitting position: front/rear, swingarm, Bottom, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P13-55

Suspension sleeves, 1pcs, fitting position: rear, swingarm, Top, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P14-1

Polyurethane leaf spring bushings and leaf spring hanger bushings, 20pcs, fitting position: front/rear, hardness: 80 Sha fits: SUZUKI SAMURAI 1.0/1.3/1.9D 04.88-

View part

KALGUM Suspension sleeve P2-1

Suspension sleeves, 12pcs, fitting position: front/rear, swingarm, hardness: 80 Sha (set) fits: SUZUKI GRAND VITARA

View part

KALGUM Suspension sleeve P3-1

Suspension sleeves, 16pcs, fitting position: front/rear, set, hardness: 80 Sha (undivided) fits: SUZUKI JIMNY 1.3/1.5D 09.98-

View part

KALGUM Suspension sleeve P3-2

Polyurethane Track control arm bushings, 16pcs, fitting position: front/rear, hardness: 80 Sha (all polibush complete - not parted Front track control arm sleeves central in metal housing- silent blo

View part

KALGUM Suspension sleeve P3-27

Polyurethane stabilizer bushings, fitting position: front, hardness: 80 Sha (fits rod diameter 25 mm) fits: SUZUKI JIMNY 1.5 07.18-

View part

KALGUM Suspension sleeve P3-3

Polyurethane Track control arm bushings, fitting position: front/rear, hardness: 80 Sha (all polibush complete - not parted) fits: SUZUKI JIMNY 1.5 07.18-

View part

KALGUM Suspension sleeve P3-4

Suspension sleeves, 4pcs, fitting position: front, Panhard rod/set, hardness: 80 Sha (undivided) fits: SUZUKI JIMNY 1.3/1.5D 09.98-

View part

KALGUM Suspension sleeve P3-5

Polyurethane Track control arm bushings, 4pcs, fitting position: front, hardness: 80 Sha (all polibush in metal housing - silent-block off-centre - for lift) fits: SUZUKI JIMNY 1.5 07.18-

View part

KALGUM Suspension sleeve P3-6

Polyurethane Track control arm bushings, 4pcs, fitting position: front, hardness: 80 Sha (all polibush in metal housing - silent-block centric) fits: SUZUKI JIMNY 1.5 07.18-

View part

KALGUM Suspension sleeve P41

Suspension sleeves, 1pcs, fitting position: front/rear, swingarm, Bottom, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P43

Suspension sleeves, 1pcs, fitting position: front, Stabilizer bar, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P44

Suspension sleeves, 1pcs, fitting position: rear, Stabilizer bar, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P45

Suspension sleeves, 1pcs, fitting position: front, shock absorber, Top, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P47

Suspension sleeves, 1pcs, fitting position: front/rear, swingarm, Bottom, hardness: 80 Sha fits: JEEP

View part

KALGUM Suspension sleeve P48

Suspension sleeves, 1pcs, fitting position: front, shock absorber, Bottom, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P49

Suspension sleeves, 1pcs, fitting position: front, swingarm, Top, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P50

Suspension sleeves, 1pcs, fitting position: rear, swingarm, Top, hardness: 80 Sha fits: JEEP GRAND CHEROKEE II 2.7D-4.7 09.98-09.05

View part

KALGUM Suspension sleeve P6-1

Suspension sleeves, 20pcs, fitting position: front/rear, bushings in a metal housing/set, hardness: 80 Sha (undivided) fits: NISSAN PATROL GR IV, PATROL GR V 2.8D/4.2/4.2D 09.88-

View part

KALGUM Suspension sleeve P6-1/2

Suspension sleeves, 20pcs, fitting position: front/rear, set, hardness: 80 Sha fits: NISSAN PATROL GR IV 2.8D-4.2D 09.88-

View part

KALGUM Suspension sleeve P6-10

Suspension sleeves, 4pcs, fitting position: front, swingarm, hardness: 80 Sha (eccentric) fits: NISSAN PATROL Y60/Y61

View part

KALGUM Suspension sleeve P6-11

Suspension sleeves, 8pcs, fitting position: rear, set/swingarm, hardness: 80 Sha (undivided) fits: NISSAN PATROL Y60/Y61

View part

KALGUM Suspension sleeve P6-13

Suspension sleeves, 4pcs, fitting position: front, swingarm, hardness: 80 Sha (undivided) fits: NISSAN PATROL Y60/Y61

View part

KALGUM Suspension sleeve P6-2

Suspension sleeves, 20pcs, fitting position: front/rear, set, hardness: 80 Sha (centric) fits: NISSAN PATROL GR IV, PATROL GR V 2.8D/4.2/4.2D 09.88-

View part

KALGUM Suspension sleeve P6-22

Polyurethane stabilizer bushings, 2pcs, fitting position: front, hardness: 80 Sha (fits rod diameter 20 mm) fits: NISSAN PATROL GR IV, PATROL GR V 2.8D-4.8 09.88-

View part

KALGUM Suspension sleeve P6-23

Polyurethane stabilizer bushings, 2pcs, fitting position: rear, stabilizer, hardness: 80 Sha (fits rod diameter 19 mm) fits: NISSAN PATROL GR IV, PATROL GR V 2.8D-4.8 09.88-

View part

Buying with Partios

Buying KALGUM parts through Partios

Are these genuine KALGUM parts?

Yes. Every KALGUM line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source KALGUM parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for KALGUM lines that aren't currently available.

Do you supply KALGUM parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on KALGUM parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a KALGUM order?

It depends on the line. Stocked KALGUM items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for KALGUM parts?

No. There's no minimum order value or quantity on a Partios trade account. Some KALGUM lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account