Partios Wholesale catalogue
JT Distributor | Transmission & Driveline
Rear sprocket (1,726) · Front sprocket (879) · Chain (326) · Belt (118) · Rolls and clamps of drive chain (40) · Garage accessories (2) · Printed catalogue (1)
3,093 current catalogue lines
About the JT range
JT’s range at Partios is transmission & driveline, and it is concentrated: 1,726 of the 3,093 lines carried sit under one part type, rear sprocket. Behind it the largest groups are front sprocket (879), chain (326), belt (118), rolls and clamps of drive chain (40) and garage accessories (2). Those six account for most of the catalogue; the remaining 1 lines are spread across 1 further part types, so this is depth in a narrow area rather than broad coverage. Buyers are typically transmission specialists, workshops and motor factors; driveline work is high-value and usually planned, so buyers tend to source the whole job at once. The 3,093 lines carried give reasonable coverage across common applications.
Catalogue products
Vehicle references are indicative — confirm against the article number.
JT Rear sprocket JTR506,40
Rear gear steel, chain type: 630, number of teeth: 40 fits: KAWASAKI GPZ 1000 1986-1989
View partJT Rear sprocket JTR506,41
Rear gear steel, chain type: 630, number of teeth: 41 fits: KAWASAKI GPZ 1000 1986-1989
View partJT Rear sprocket JTR510,46
Rear gear steel, chain type: 520, number of teeth: 46 fits: CAGIVA WMX HUSQVARNA WRK 125/250/260 1985-1989
View partJT Rear sprocket JTR510,48
Rear gear steel, chain type: 520, number of teeth: 48 fits: CAGIVA WMX HUSQVARNA WRK 125/250/260 1985-1989
View partJT Rear sprocket JTR510,50
Rear gear steel, chain type: 520, number of teeth: 50 fits: CAGIVA WMX HUSQVARNA WRK 125/250/260 1985-1989
View partJT Rear sprocket JTR510,52
Rear gear steel, chain type: 520, number of teeth: 52 fits: CAGIVA WMX HUSQVARNA WRK 125/250/260 1985-1989
View partJT Rear sprocket JTR6,41
Rear gear steel, chain type: 525, number of teeth: 41 fits: BMW F 650/800 2008-2018
View partJT Rear sprocket JTR6,42
Rear gear steel, chain type: 525, number of teeth: 42 fits: BMW F 650/800 2008-2018
View partJT Rear sprocket JTR6,42ZBK
Rear gear steel, chain type: 525, number of teeth: 42 fits: BMW F 650/800 2008-2018
View partJT Rear sprocket JTR6,47
Rear gear steel, chain type: 525, number of teeth: 47 fits: BMW F 650/800 2008-2018
View partJT Rear sprocket JTR600,52
Rear gear steel, chain type: 428, number of teeth: 52 fits: GILERA RRT, RTX, RX 125 1985-1988
View partJT Rear sprocket JTR602,40
Rear gear steel, chain type: 520, number of teeth: 40 fits: GILERA RC, RX 125/200 1985-1988
View partJT Rear sprocket JTR602,42
Rear gear steel, chain type: 520, number of teeth: 42 fits: GILERA RC, RX 125/200 1985-1988
View partJT Rear sprocket JTR602,44
Rear gear steel, chain type: 520, number of teeth: 44 fits: GILERA RC, RX 125/200 1985-1988
View partJT Rear sprocket JTR604,35
Rear gear steel, chain type: 520, number of teeth: 35 fits: GILERA CRONO, MX, MX 1, SP HONDA CRM, NSR 125 1988-2002
View partJT Rear sprocket JTR604,36
Rear gear steel, chain type: 520, number of teeth: 36 fits: GILERA CRONO, MX, MX 1, SP HONDA CRM, NSR 125 1988-2002
View partJT Rear sprocket JTR604,38
Rear gear steel, chain type: 520, number of teeth: 38 fits: GILERA CRONO, MX, MX 1, SP HONDA CRM, NSR 125 1988-2002
View partJT Rear sprocket JTR604,40
Rear gear steel, chain type: 520, number of teeth: 40 fits: GILERA CRONO, MX, MX 1, SP HONDA CRM, NSR 125 1988-2002
View partJT Rear sprocket JTR604,44
Rear gear steel, chain type: 520, number of teeth: 44 fits: GILERA CRONO, MX, MX 1, SP HONDA CRM, NSR 125 1988-2002
View partJT Rear sprocket JTR605.35
Rear gear steel, chain type: 520, number of teeth: 35
View partJT Rear sprocket JTR605.36
Rear gear steel, chain type: 520, number of teeth: 36
View partJT Rear sprocket JTR605.37
Rear gear steel, chain type: 520, number of teeth: 37
View partJT Rear sprocket JTR605.38
Rear gear steel, chain type: 520, number of teeth: 38
View partJT Rear sprocket JTR605.39
Rear gear steel, chain type: 520, number of teeth: 39
View partJT Rear sprocket JTR606,43
Rear gear steel, chain type: 520, number of teeth: 43 fits: GILERA APACHE, RC 125 1989-1992
View partJT Rear sprocket JTR610,51
Rear gear steel, chain type: 520, number of teeth: 51 fits: GILERA DAKOTA, ER 350
View partJT Rear sprocket JTR696,43
Rear gear steel, chain type: 428, number of teeth: 43 fits: CAGIVA COCIS, MITO, PRIMA, SUPERCITY, W4 50/75/80 1990-1999
View partJT Rear sprocket JTR696.49
Rear gear steel, chain type: 428, number of teeth: 49
View partJT Rear sprocket JTR696,50
Rear gear steel, chain type: 428, number of teeth: 50 fits: CAGIVA COCIS, MITO, PRIMA, SUPERCITY, W4 50/75/80 1990-1999
View partJT Rear sprocket JTR698,39
Rear gear steel, chain type: 520, number of teeth: 39 fits: CAGIVA CRUISER, K7, N90, TAMANACO, W12, W16, W8 125/350/600 1987-1999
View partJT Rear sprocket JTR698,40
Rear gear steel, chain type: 520, number of teeth: 40 fits: CAGIVA CRUISER, K7, N90, TAMANACO, W12, W16, W8 125/350/600 1987-1999
View partJT Rear sprocket JTR698,41
Rear gear steel, chain type: 520, number of teeth: 41 fits: CAGIVA CRUISER, K7, N90, TAMANACO, W12, W16, W8 125/350/600 1987-1999
View partJT Rear sprocket JTR698,42
Rear gear steel, chain type: 520, number of teeth: 42 fits: CAGIVA CRUISER, K7, N90, TAMANACO, W12, W16, W8 125/350/600 1987-1999
View partJT Rear sprocket JTR698,44
Rear gear steel, chain type: 520, number of teeth: 44 fits: CAGIVA CRUISER, K7, N90, TAMANACO, W12, W16, W8 125/350/600 1987-1999
View partJT Rear sprocket JTR7,44
Rear gear steel, chain type: 525, number of teeth: 44 fits: BMW S 1000 2008-2020
View partJT Rear sprocket JTR7,44ZBK
Rear gear steel, chain type: 525, number of teeth: 44 fits: BMW S 1000 2008-2020
View partJT Rear sprocket JTR7,45
Rear gear steel, chain type: 525, number of teeth: 45 fits: BMW S 1000 2008-2020
View partJT Rear sprocket JTR7,45ZBK
Rear gear steel, chain type: 525, number of teeth: 45 fits: BMW S 1000 2008-2020
View partJT Rear sprocket JTR7,46ZBK
Rear gear steel, chain type: 525, number of teeth: 46 fits: BMW S 1000 2008-2020
View partJT Rear sprocket JTR701,38
Rear gear steel, chain type: 520, number of teeth: 38 fits: APRILIA AF1, RS, TUAREG CAGIVA MITO, N1, RAPTOR, RIVER, SUPERCITY 125/600 1989-2010
View partJT Rear sprocket JTR701,39
Rear gear steel, chain type: 520, number of teeth: 39 fits: APRILIA AF1, RS, TUAREG CAGIVA MITO, N1, RAPTOR, RIVER, SUPERCITY 125/600 1989-2010
View partJT Rear sprocket JTR701,40
Rear gear steel, chain type: 520, number of teeth: 40 fits: APRILIA AF1, RS, TUAREG CAGIVA MITO, N1, RAPTOR, RIVER, SUPERCITY 125/600 1989-2010
View partJT Rear sprocket JTR701,41
Rear gear steel, chain type: 520, number of teeth: 41 fits: APRILIA AF1, RS, TUAREG CAGIVA MITO, N1, RAPTOR, RIVER, SUPERCITY 125/600 1989-2010
View partJT Rear sprocket JTR701,42
Rear gear steel, chain type: 520, number of teeth: 42 fits: APRILIA AF1, RS, TUAREG CAGIVA MITO, N1, RAPTOR, RIVER, SUPERCITY 125/600 1989-2010
View partJT Rear sprocket JTR701,43
Rear gear steel, chain type: 520, number of teeth: 43 fits: APRILIA AF1, RS, TUAREG CAGIVA MITO, N1, RAPTOR, RIVER, SUPERCITY 125/600 1989-2010
View partJT Rear sprocket JTR702,40
Rear gear steel, chain type: 525, number of teeth: 40 fits: APRILIA NA, RSV, SL, SMV, TUONO 750-1200 1998-2020
View partJT Rear sprocket JTR702,41
Rear gear steel, chain type: 525, number of teeth: 41 fits: APRILIA NA, RSV, SL, SMV, TUONO 750-1200 1998-2020
View partJT Rear sprocket JTR702,42
Rear gear steel, chain type: 525, number of teeth: 42 fits: APRILIA NA, RSV, SL, SMV, TUONO 750-1200 1998-2020
View partBuying with Partios
Buying JT parts through Partios
Are these genuine JT parts?
- Yes. Every JT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source JT parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for JT lines that aren't currently available.
Do you supply JT parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on JT parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a JT order?
- It depends on the line. Stocked JT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for JT parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some JT lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account