Partios Wholesale catalogue

JT Distributor | Transmission & Driveline

Rear sprocket (1,726) · Front sprocket (879) · Chain (326) · Belt (118) · Rolls and clamps of drive chain (40) · Garage accessories (2) · Printed catalogue (1)

3,093 current catalogue lines

About the JT range

JT’s range at Partios is transmission & driveline, and it is concentrated: 1,726 of the 3,093 lines carried sit under one part type, rear sprocket. Behind it the largest groups are front sprocket (879), chain (326), belt (118), rolls and clamps of drive chain (40) and garage accessories (2). Those six account for most of the catalogue; the remaining 1 lines are spread across 1 further part types, so this is depth in a narrow area rather than broad coverage. Buyers are typically transmission specialists, workshops and motor factors; driveline work is high-value and usually planned, so buyers tend to source the whole job at once. The 3,093 lines carried give reasonable coverage across common applications.

Catalogue products

Vehicle references are indicative — confirm against the article number.

JT Rear sprocket JTR263,40

Rear gear steel, chain type: 428, number of teeth: 40 fits: HONDA CT, SUPRA 100/110 1986-2000

View part

JT Rear sprocket JTR263,42

Rear gear steel, chain type: 428, number of teeth: 42 fits: HONDA CT, SUPRA 100/110 1986-2000

View part

JT Rear sprocket JTR263,45

Rear gear steel, chain type: 428, number of teeth: 45 fits: HONDA CT, SUPRA 100/110 1986-2000

View part

JT Rear sprocket JTR264,45

Rear gear steel, chain type: 428, number of teeth: 45 fits: HONDA CT 110 1999-2000

View part

JT Rear sprocket JTR267,39

Rear gear steel, chain type: 428, number of teeth: 39 fits: HONDA CD 175 1971-1971

View part

JT Rear sprocket JTR269,34

Rear gear steel, chain type: 428, number of teeth: 34 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,35

Rear gear steel, chain type: 428, number of teeth: 35 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,36

Rear gear steel, chain type: 428, number of teeth: 36 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,37

Rear gear steel, chain type: 428, number of teeth: 37 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,38

Rear gear steel, chain type: 428, number of teeth: 38 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,39

Rear gear steel, chain type: 428, number of teeth: 39 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,40

Rear gear steel, chain type: 428, number of teeth: 40 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,41

Rear gear steel, chain type: 428, number of teeth: 41 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,42

Rear gear steel, chain type: 428, number of teeth: 42 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,43

Rear gear steel, chain type: 428, number of teeth: 43 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,44

Rear gear steel, chain type: 428, number of teeth: 44 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,45

Rear gear steel, chain type: 428, number of teeth: 45 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,46

Rear gear steel, chain type: 428, number of teeth: 46 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,47

Rear gear steel, chain type: 428, number of teeth: 47 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,49

Rear gear steel, chain type: 428, number of teeth: 49 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,50

Rear gear steel, chain type: 428, number of teeth: 50 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,51

Rear gear steel, chain type: 428, number of teeth: 51 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,52

Rear gear steel, chain type: 428, number of teeth: 52 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR269,56

Rear gear steel, chain type: 428, number of teeth: 56 fits: DAELIM VL, VS, VT HONDA CB, CBZ, CG, CM, EZ, H, NX, XL KREIDELER 125 KYMCO HIPSTER, PULSAR, STRYKER, ZING 90-185 1973-2010

View part

JT Rear sprocket JTR271,50

Rear gear steel, chain type: 428, number of teeth: 50 fits: HONDA CLR, NX 125 1989-2003

View part

JT Rear sprocket JTR272,31

Rear gear steel, chain type: 520, number of teeth: 31 fits: HONDA CB 250 1992-2002

View part

JT Rear sprocket JTR273,33

Rear gear steel, chain type: 520, number of teeth: 33 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR273,39

Rear gear steel, chain type: 520, number of teeth: 39 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR273,40

Rear gear steel, chain type: 520, number of teeth: 40 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR273,41

Rear gear steel, chain type: 520, number of teeth: 41 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR273,42

Rear gear steel, chain type: 520, number of teeth: 42 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR273,44

Rear gear steel, chain type: 520, number of teeth: 44 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR273,45

Rear gear steel, chain type: 520, number of teeth: 45 fits: HONDA CA, CMX, VT, XL KTM DUKE 125/200/250 1985-2016

View part

JT Rear sprocket JTR277,41

Rear gear steel, chain type: 520, number of teeth: 41 fits: HONDA XL 200 1984-1990

View part

JT Rear sprocket JTR277,45

Rear gear steel, chain type: 520, number of teeth: 45 fits: HONDA XL 200 1984-1990

View part

JT Rear sprocket JTR278,34

Rear gear steel, chain type: 50 (530), number of teeth: 34 fits: HONDA CB, CJ 250/350/360 1969-1978

View part

JT Rear sprocket JTR278,36

Rear gear steel, chain type: 50 (530), number of teeth: 36 fits: HONDA CB 250/350/360 1968-1977

View part

JT Rear sprocket JTR278,37

Rear gear steel, chain type: 50 (530), number of teeth: 37 fits: HONDA CB, CJ 250/350/360 1969-1979

View part

JT Rear sprocket JTR278,38

Rear gear steel, chain type: 50 (530), number of teeth: 38 fits: HONDA CB 250/350/360 1969-1977

View part

JT Rear sprocket JTR279,30

Rear gear steel, chain type: 520, number of teeth: 30 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,31

Rear gear steel, chain type: 520, number of teeth: 31 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,32

Rear gear steel, chain type: 520, number of teeth: 32 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,33

Rear gear steel, chain type: 520, number of teeth: 33 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,35

Rear gear steel, chain type: 520, number of teeth: 35 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,36

Rear gear steel, chain type: 520, number of teeth: 36 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,38

Rear gear steel, chain type: 520, number of teeth: 38 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,39

Rear gear steel, chain type: 520, number of teeth: 39 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

JT Rear sprocket JTR279,40

Rear gear steel, chain type: 520, number of teeth: 40 fits: HONDA CB, CD, CMX, MTX 125/200/250 1974-2008

View part

Buying with Partios

Buying JT parts through Partios

Are these genuine JT parts?

Yes. Every JT line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source JT parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for JT lines that aren't currently available.

Do you supply JT parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on JT parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a JT order?

It depends on the line. Stocked JT items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for JT parts?

No. There's no minimum order value or quantity on a Partios trade account. Some JT lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account