Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Suspension ball joint HRQ1136

Reinforced suspension pin, quantity per set: 2 pcs} fits: HONDA ACCORD VI, ACCORD VII, ACCORD VIII, CIVIC III, CIVIC IV, CIVIC V, CIVIC VI, CIVIC VII, CR-V II, LEGEND IV, PRELUDE V 1.2-3.5 10.83-06.15

View part

HARDRACE Suspension ball joint HRQ1137

Reinforced suspension pin, quantity per set: 2 pcs} fits: HONDA CIVIC IV, CIVIC V, CIVIC VI 1.3-2.0D 09.87-03.01

View part

HARDRACE Polyurethane suspension sleeve HRQ1138

Polyurethane bushing, fits: TOYOTA CAMRY, COROLLA 1.2-2.5 09.11-

View part

HARDRACE Engine mount HRQ1139

Engine mount fits: FORD FOCUS II, FOCUS III, KUGA II 1.5-1.6D 04.05-02.20

View part

HARDRACE Polyurethane suspension sleeve HRQ1143

Polyurethane bushing, fits: TOYOTA AURIS 1.2-2.2D 10.06-12.18

View part

HARDRACE Polyurethane suspension sleeve HRQ1144

Polyurethane bushing, fits: TOYOTA AURIS, COROLLA 1.2-2.2D 10.06-

View part

HARDRACE Polyurethane suspension sleeve HRQ1147

Polyurethane bushing, fits: HONDA CIVIC X 1.0/1.5 02.17-12.22

View part

HARDRACE Polyurethane suspension sleeve HRQ1149

Polyurethane bushing, fits: FORD FIESTA VI MAZDA 2 1.0-1.6D 07.07-01.18

View part

HARDRACE Polyurethane suspension sleeve HRQ1150

Polyurethane bushing, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Polyurethane suspension sleeve HRQ1151

Polyurethane bushing, fits: FORD FIESTA VI MAZDA 2 1.0-1.6D 07.07-01.18

View part

HARDRACE Polyurethane suspension sleeve HRQ1153

Polyurethane bushing, fits: MERCEDES C (W205), E (W213) 1.6-3.0D 12.13-10.23

View part

HARDRACE Suspension ball joint HRQ1154

Reinforced suspension pin, quantity per set: 2 pcs} fits: FORD FIESTA VI MAZDA 2 1.0-1.6D 07.07-

View part

HARDRACE Suspension ball joint HRQ1155

Reinforced suspension pin, quantity per set: 2 pcs} fits: MAZDA 3, 5 1.3-2.3 10.03-

View part

HARDRACE Suspension ball joint HRQ1156

Reinforced suspension pin, quantity per set: 2 pcs} fits: MAZDA 3, 6, CX-3, CX-5 1.5-2.5H 11.11-

View part

HARDRACE Polyurethane suspension sleeve HRQ1157

Polyurethane bushing, fits: MAZDA 3, 6, CX-5 1.5-2.5H 11.11-

View part

HARDRACE Polyurethane suspension sleeve HRQ1170

Polyurethane bushing, fits: MERCEDES C (W205), E (W213) 2.0-4.0 10.14-10.23

View part

HARDRACE Suspension ball joint HRQ1171

Reinforced suspension pin, quantity per set: 2 pcs} fits: HONDA HR-V 1.5H 09.21-

View part

HARDRACE Front wishbone assembly HRQ1175

Suspension track control arm set fits: SUBARU FORESTER, IMPREZA, LEGACY V, LEGACY VI, XV 1.6-3.6 01.08-

View part

HARDRACE Front wishbone assembly HRQ1180

Suspension track control arm set fits: BMW X5 (F15, F85), X6 (F16, F86) 2.0D-4.4 08.13-07.19

View part

HARDRACE Track control arm HRQ1181

Reinforced swingarm, quantity per set: 2 } fits: BMW X5 (F15, F85), X6 (F16, F86) 2.0D-4.4 08.13-07.19

View part

HARDRACE Polyurethane suspension sleeve HRQ1183

Polyurethane bushing, fits: MAZDA MX-5 IV, MX-5 RF TARGA 1.5/2.0 06.15-

View part

HARDRACE Polyurethane suspension sleeve HRQ1184

Polyurethane bushing, fits: MAZDA MX-5 IV, MX-5 RF TARGA 1.5/2.0 06.15-

View part

HARDRACE Polyurethane suspension sleeve HRQ1185

Polyurethane bushing, fits: MAZDA MX-5 IV, MX-5 RF TARGA 1.5/2.0 06.15-

View part

HARDRACE Polyurethane suspension sleeve HRQ1186

Polyurethane bushing, fits: MAZDA MX-5 IV, MX-5 RF TARGA 1.5/2.0 06.15-

View part

HARDRACE Stabilizer link HRQ1193

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: JEEP GLADIATOR 3.0D/3.6/3.6ALK 04.19-

View part

HARDRACE Polyurethane suspension sleeve HRQ1197

Polyurethane bushing, fits: SUZUKI SWIFT VI 1.2H 12.23-

View part

HARDRACE Polyurethane suspension sleeve HRQ1198

Polyurethane bushing, fits: SUZUKI SWIFT VI 1.2H 12.23-

View part

HARDRACE Polyurethane suspension sleeve HRQ1199

Polyurethane bushing, fits: HONDA ACCORD VI 2.0/2.0D/3.0 02.98-06.03

View part

HARDRACE Track control arm HRQ1201

Reinforced swingarm, quantity per set: 2 } fits: BMW 3 (G20, G80, G28), 3 (G21, G81), 4 (G22, G82), 4 (G23, G83), 4 GRAN COUPE (G26) 2.0-3.0DH 11.18-

View part

HARDRACE Stabilizer HRQ1225

Stabilizer fits: HONDA CIVIC X 2.0 06.17-12.22

View part

HARDRACE Stabilizer HRQ1227

Stabilizer fits: HONDA CIVIC XI 2.0 06.22-

View part

HARDRACE Stabilizer link HRQ1228

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: NISSAN PATROL GR IV, PATROL GR V 2.8D-4.2D 01.86-

View part

HARDRACE Track control arm HRQ1229

Reinforced swingarm, quantity per set: 2 } fits: TESLA MODEL 3 Electric 01.17-

View part

HARDRACE Track control arm HRQ1230

Reinforced swingarm, quantity per set: 2 } fits: TESLA MODEL 3 Electric 01.17-

View part

HARDRACE Stabilizer HRQ1231

Stabilizer fits: AUDI A1, A1 ALLSTREET, A1 CITY CARVER SKODA FABIA IV, SCALA VW POLO VI, T-CROSS 1.0-2.0 06.17-

View part

HARDRACE Stabilizer HRQ1232

Stabilizer fits: AUDI A1, A1 ALLSTREET, A1 CITY CARVER SKODA FABIA IV VW POLO VI 1.0-2.0 06.17-

View part

HARDRACE Polyurethane suspension sleeve HRQ1233

Polyurethane bushing, fits: MAZDA MX-5 IV, MX-5 RF TARGA 1.5/2.0 06.15-

View part

HARDRACE Suspension struts HRQ1247

Suspension struts fits: VW POLO VI 1.0-2.0 06.17-

View part

HARDRACE Suspension struts HRQ1249

Suspension struts fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Suspension struts HRQ1250

Suspension struts fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Other elements of brake system HRQ1251

View part

HARDRACE Track control arm HRQ1252

Reinforced swingarm, quantity per set: 2 } fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Track control arm HRQ1253

Reinforced swingarm, quantity per set: 2 } fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Suspension struts HRQ1257

Suspension struts fits: VW POLO VI 1.0-1.6D 06.17-

View part

HARDRACE Stabilizer HRQ1259

Stabilizer fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Stabilizer HRQ1260

Stabilizer fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Suspension struts HRQ1262

Suspension struts fits: MAZDA MX-5 II 1.6/1.8 05.98-10.05

View part

HARDRACE Front wishbone assembly HRQ1264

Suspension track control arm set fits: SUBARU FORESTER, IMPREZA, LEGACY V, LEGACY VI, XV 1.6-3.6 01.08-

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account