Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Stabilizer HRQ0523

Stabilizer fits: BMW 5 (G30, F90), 5 (G31), 7 (G11, G12) 2.0-4.4 07.15-

View part

HARDRACE Suspension struts HRQ0524

Suspension struts fits: MERCEDES GLC (C253) 2.0-4.0 06.16-03.23

View part

HARDRACE Engine mount HRQ0530

Engine mount fits: HONDA CIVIC VI 1.6 11.98-03.01

View part

HARDRACE Panhard rod HRQ0533

Panhard rod, quantity per set: 1 pcs, rear} (adjusted rubber-metal reinforced bush) fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 09.07-

View part

HARDRACE Stabilizer HRQ0534

Stabilizer, front, 30 mm fits: TOYOTA RAV 4 V 2.0/2.5H 12.18-

View part

HARDRACE Engine mount HRQ0536

Engine mount fits: HONDA CIVIC V, CIVIC VI 1.5/1.6 01.92-12.96

View part

HARDRACE Undercarriage shield HRQ0538

Engine cover fits: JEEP WRANGLER IV 2.0 4xe Plug-in Hybrid (JL74)/2.0 T-GDi (JL72, JL74) 11.17-

View part

HARDRACE Suspension struts HRQ0539

Suspension struts fits: JEEP GLADIATOR, WRANGLER IV 2.0-3.6ALK 09.17-

View part

HARDRACE Suspension struts HRQ0540

Suspension struts fits: JEEP WRANGLER IV 2.0-3.6 09.17-

View part

HARDRACE Front wishbone assembly HRQ0545

Suspension track control arm set fits: BMW 5 (G30, F90), 7 (G11, G12), 8 (G15, F92) 2.0-6.6 07.15-

View part

HARDRACE Wheel suspension track control arm, rear HRQ0546

Rear axle track control arm fits: BMW 5 (G30, F90), 5 (G31), 7 (G11, G12) 2.0-6.6 07.15-

View part

HARDRACE Track control arm HRQ0552

Reinforced swingarms set, quantity per set: 2, front axle, bottom L/R } (rubber-metal reinforced bush) fits: TOYOTA C-HR 1.2 10.16-

View part

HARDRACE Track control arm HRQ0554

Reinforced swingarm, quantity per set: 2 } fits: SUZUKI SX4 S-CROSS, VITARA 1.0-1.6D 08.13-

View part

HARDRACE Front wishbone assembly HRQ0558

Suspension track control arm set fits: INFINITI G NISSAN 370Z 3.5/3.7 09.04-

View part

HARDRACE Track control arm HRQ0560

Reinforced swingarm, quantity per set: 2 } fits: SUZUKI JIMNY 1.3 11.88-03.98

View part

HARDRACE Track control arm HRQ0561

Reinforced swingarm, quantity per set: 2 } fits: SUZUKI JIMNY 1.3 11.88-03.98

View part

HARDRACE Other elements of suspension system HRQ0562

View part

HARDRACE Other elements of suspension system HRQ0563

View part

HARDRACE Stabilizer HRQ0565

Stabilizer fits: SKODA FABIA III, FABIA III PRAKTIK 1.0-1.4D 08.14-12.22

View part

HARDRACE Polyurethane suspension sleeve HRQ0568

Polyurethane bushing, fits: HONDA CIVIC V, CIVIC VI 1.4LPG-2.0D 01.92-03.01

View part

HARDRACE Track control arm HRQ0569

Reinforced swingarm, quantity per set: 2 } fits: DODGE RAM 1500, RAM 2500 3.7/4.7/5.7 10.08-

View part

HARDRACE Track control arm HRQ0570

Reinforced swingarm, quantity per set: 2 } fits: DODGE RAM 1500, RAM 2500 3.7/4.7/5.7 10.08-

View part

HARDRACE Suspension struts HRQ0571

Suspension struts fits: TOYOTA COROLLA 1.2/1.8H/2.0H 10.18-

View part

HARDRACE Suspension struts HRQ0574

Suspension struts fits: JEEP GLADIATOR, WRANGLER III, WRANGLER IV 2.0-3.8 04.07-

View part

HARDRACE Suspension struts HRQ0575

Suspension struts fits: TOYOTA COROLLA 1.2/1.8H/2.0H 10.18-

View part

HARDRACE Suspension struts HRQ0576

Suspension struts fits: TOYOTA COROLLA 1.2/1.8H/2.0H 10.18-

View part

HARDRACE Suspension struts HRQ0580

Upper suspension bar front (material: aluminium, number of fitting holes: 5) fits: BMW 1 (F20), 1 (F21), 2 (F22, F87), 2 (F23) 1.5-3.0 07.11-12.19

View part

HARDRACE Suspension struts HRQ0581

Upper suspension bar fits: BMW 1 (F20), 3 (F30, F80), 3 (F31), 3 GRAN TURISMO (F34) 1.5-3.0H 11.11-

View part

HARDRACE Suspension ball joint HRQ0582

Reinforced suspension pin, quantity per set: 2 pcs} fits: MITSUBISHI LANCER VI, LANCER VII, LANCER VIII 2.0/2.0D 09.95-

View part

HARDRACE Stabilizer HRQ0583

Stabilizer fits: TOYOTA COROLLA 1.2/1.8H/2.0H 10.18-

View part

HARDRACE Stabilizer HRQ0585

Stabilizer fits: MAZDA 3, CX-30 1.8D/2.0/2.0H 11.18-

View part

HARDRACE Screws and pins HRQ0587

Screws and pins, M14x1,5 length: 30 mm (20 pcs.) fits: HONDA CIVIC X 08.16-12.22

View part

HARDRACE Track control arm HRQ0589

Reinforced swingarm, quantity per set: 2 } fits: TOYOTA AVENSIS, COROLLA 1.3-2.2D 10.06-

View part

HARDRACE Stabilizer link HRQ0590

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: JEEP GLADIATOR, WRANGLER IV 2.0-3.6ALK 09.17-

View part

HARDRACE Suspension struts HRQ0591

Suspension struts fits: MAZDA 3, CX-30 1.8D/2.0/2.0H 11.18-

View part

HARDRACE Suspension struts HRQ0592

Suspension struts fits: MAZDA 3, CX-30 1.8D/2.0/2.0H 11.18-

View part

HARDRACE Stabilizer HRQ0593

Stabilizer fits: MAZDA 3, CX-30 1.8D/2.0/2.0H 11.18-

View part

HARDRACE Track control arm HRQ0594

Reinforced swingarm, quantity per set: 2 } fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), E (A238), E ALL-TERRAIN (S213), E (C238), E T-MODEL (S213), E (W213) 1.5-4.0 12.13-

View part

HARDRACE Track control arm HRQ0595

Reinforced swingarm, quantity per set: 2 } fits: MERCEDES C (A205), C (C205), C T-MODEL (S205), C (W205), E (A238), E ALL-TERRAIN (S213), E (C238), E T-MODEL (S213), E (W213) 1.5-4.0 12.13-

View part

HARDRACE Track control arm HRQ0596

Reinforced swingarm, quantity per set: 2 } fits: JEEP GLADIATOR, WRANGLER IV 2.0-3.6ALK 09.17-

View part

HARDRACE Track control arm HRQ0597

Reinforced swingarm, quantity per set: 2 } fits: JEEP GLADIATOR, WRANGLER IV 2.0-3.6ALK 09.17-

View part

HARDRACE Polyurethane suspension sleeve HRQ0599

Reinforced bushing, fits: SUBARU FORESTER, IMPREZA, LEGACY IV, XV 1.6-3.0 09.03-

View part

HARDRACE Front wishbone assembly HRQ0600

Suspension track control arm set fits: TESLA MODEL S Electric 09.12-04.26

View part

HARDRACE Wheel suspension track control arm, rear HRQ0602

Rear axle track control arm fits: TESLA MODEL S, MODEL X Electric 09.12-04.26

View part

HARDRACE Front wishbone assembly HRQ0603

Suspension track control arm set fits: TESLA MODEL 3 Electric 01.17-

View part

HARDRACE Front wishbone assembly HRQ0604

Suspension track control arm set fits: TESLA MODEL 3 Electric 01.17-

View part

HARDRACE Wheel suspension track control arm, rear HRQ0605

Rear axle track control arm fits: TESLA MODEL 3 Electric 01.17-

View part

HARDRACE Suspension struts HRQ0606

Suspension struts fits: BMW Z4 (G29) 2.0 11.18-

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account