Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Polyurethane suspension sleeve HR7257

Reinforced suspension bushings (2pcs, reinforced version, lower swingarm/rear, L/R, front axle) fits: HONDA CIVIC VIII 09.05-12.12

View part

HARDRACE Shock absorber upper mount HR7258

Shock absorber upper mount, quantity per set: 2 pcs, front, L/R}, fits: HONDA CITY IV 1.2 (GG1)/1.2 i-DSI (GD5, GE2)/1.3/1.3 HYBRID (GP1)/1.3 i (GE6, GG3, GG6)/1.3 iDSi (GD1)/1.3 SES/1.4/1.4 iDSI (GE3

View part

HARDRACE Engine bracket HR7259

Reinforced engine pad,

View part

HARDRACE Engine bracket HR7260

Reinforced engine pad, fits: BMW 3 (E36), 3 (E46), Z4 (E85), Z4 (E86), Z4 (E89) 1.6-3.2 09.90-08.16

View part

HARDRACE Engine bracket HR7261

Reinforced engine pad, fits: BMW 3 (E36), 3 (E46), Z4 (E85), Z4 (E86), Z4 (E89) 1.6-3.2 09.90-08.16

View part

HARDRACE Stabilizer link HR7262

Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: MAZDA CX-7, MX-5 III, RX-8 1.3-2.5 08.03-12.14

View part

HARDRACE Stabilizer link HR7263

Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 (shorter by 10mm, length: 85mm) fits: MAZDA MX-5 III, RX-8 1.3/1.8/2.0 08.03-12.14

View part

HARDRACE Track control arm HR7265

Reinforced swingarms set, quantity per set: 2 }

View part

HARDRACE Track control arm HR7266

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: TOYOTA CELICA 1.8 08.99-09.05

View part

HARDRACE Tie rod (with no end) HR7267

Reinforced steering rods,

View part

HARDRACE Engine bracket HR7268

Reinforced engine pad, fits: TOYOTA COROLLA 1.3-2.0D 05.92-04.97

View part

HARDRACE Track control arm HR7269

Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR7270

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: VOLVO XC60 I FORD MONDEO IV 1.6-3.2 03.07-12.17

View part

HARDRACE Engine bracket HR7271

Reinforced engine pad, fits: SUZUKI JIMNY 1.3 11.88-03.98

View part

HARDRACE Engine bracket HR7272

Reinforced engine pad, fits: SUZUKI JIMNY 1.3 11.88-03.98

View part

HARDRACE Tie rod (with no end) HR7273

Reinforced steering rods,

View part

HARDRACE Tie rod (with no end) HR7274

Reinforced steering rods,

View part

HARDRACE Polyurethane suspension sleeve HR7275

Reinforced bushing, 2pcs, fits: OPEL ASTRA H, ASTRA H CLASSIC 1.3D-2.0 08.04-05.14

View part

HARDRACE Polyurethane suspension sleeve HR7277

Reinforced bushing, 2pcs,

View part

HARDRACE Stabilizer bar bushing HR7278

View part

HARDRACE Suspension ball joint HR7279

Reinforced suspension pin}

View part

HARDRACE Track control arm HR7280

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Engine bracket HR7281

Reinforced engine pad, fits: TOYOTA COROLLA, COROLLA VERSO 1.4-2.0D 01.01-07.14

View part

HARDRACE Engine bracket HR7281-A

Reinforced engine pad, fits: TOYOTA COROLLA, COROLLA VERSO 1.4-2.0D 01.01-07.14

View part

HARDRACE Engine bracket HR7282

Reinforced engine pad, fits: TOYOTA TERCEL 1.5 09.94-

View part

HARDRACE Engine bracket HR7283

Reinforced engine pad, fits: TOYOTA TERCEL 1.5 09.94-

View part

HARDRACE Engine bracket HR7284

Reinforced engine pad, fits: TOYOTA TERCEL 1.5 09.94-

View part

HARDRACE Track control arm HR7285

Reinforced swingarms set, quantity per set: 2, front, bottom L/R, UNIBALL } (adjusted) fits: MITSUBISHI LANCER VII 1.6/2.0 06.00-12.13

View part

HARDRACE Engine bracket HR7286

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Engine bracket HR7287

Reinforced engine pad, fits: TOYOTA ALTEZZA GITA, CHASER, SUPRA 2.5/3.0 10.92-11.05

View part

HARDRACE Track control arm HR7288

Reinforced swingarm, quantity per set: 2, rear axle, bottom/front L/R, UNIBALL } fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.6-4.4 06.04-12.13

View part

HARDRACE Track control arm HR7289

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)

View part

HARDRACE Engine bracket HR7290

Reinforced engine pad, fits: TOYOTA CHASER, SUPRA 2.5/3.0 10.92-07.02

View part

HARDRACE Track control arm HR7291

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: MAZDA TRIBUTE 2.0/2.3/3.0 03.00-05.08

View part

HARDRACE Engine bracket HR7292

Reinforced engine pad, fits: MITSUBISHI OUTLANDER II 2.0-2.4ALK 11.06-11.12

View part

HARDRACE Engine bracket HR7293

Reinforced engine pad 1 pcs, left, fits: MITSUBISHI LANCER VIII, OUTLANDER II 2.0-2.4ALK 11.06-

View part

HARDRACE Track control arm HR7294

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MITSUBISHI GALANT VIII 2.0/2.4/2.5 09.96-10.04

View part

HARDRACE Engine bracket HR7295

Reinforced engine pad, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Track control arm HR7296

Reinforced swingarms set, quantity per set: 2, rear axle, bottom L/R, UNIBALL } (adjustable, reinforced metal-rubber bushings) fits: MAZDA 6, CX-5 1.8-2.5 07.03-02.17

View part

HARDRACE Engine bracket HR7297

Reinforced engine pad, fits: MITSUBISHI ECLIPSE CROSS, OUTLANDER II, OUTLANDER III 1.5-2.4H 11.06-

View part

HARDRACE Tie rod (with no end) HR7298

Reinforced steering rods,

View part

HARDRACE Engine bracket HR7299

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Engine bracket HR7300

Reinforced engine pad, fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Engine bracket HR7301

Reinforced engine pad, fits: TOYOTA ALTEZZA GITA, ARISTO 3.0 08.97-11.05

View part

HARDRACE Track control arm HR7303

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: MITSUBISHI ECLIPSE CROSS, LANCER VII, OUTLANDER II, OUTLANDER III 1.5-2.4H 06.00-

View part

HARDRACE Engine bracket HR7304

Reinforced engine pad,

View part

HARDRACE Track control arm HR7306

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR7308

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: BMW X5 (E53) 3.0-4.8 01.00-12.06

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account