Partios Wholesale catalogue
Hardrace Distributor | Suspension & Steering
Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)
3,272 current catalogue lines
About the HARDRACE range
Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.
Catalogue products
Vehicle references are indicative — confirm against the article number.
HARDRACE Engine bracket HR7149
Reinforced engine pad,
View partHARDRACE Engine bracket HR7150
Reinforced engine pad, fits: NISSAN SKYLINE 2.0 06.98-07.00
View partHARDRACE Engine bracket HR7151
Reinforced engine pad, fits: NISSAN SKYLINE 2.5 07.93-05.98
View partHARDRACE Engine bracket HR7152
Reinforced engine pad 1 pcs, right/top, fits: HONDA CIVIC VIII 2.0 09.06-01.12
View partHARDRACE Engine bracket HR7153
Reinforced engine pad,
View partHARDRACE Engine bracket HR7154
Reinforced engine pad,
View partHARDRACE Engine bracket HR7155
Reinforced engine pad,
View partHARDRACE Engine bracket HR7156
Reinforced engine pad,
View partHARDRACE Engine bracket HR7157
Reinforced engine pad,
View partHARDRACE Engine bracket HR7158
Reinforced engine pad,
View partHARDRACE Engine bracket HR7159
Reinforced engine pad,
View partHARDRACE Engine bracket HR7160
Reinforced engine pad,
View partHARDRACE Engine bracket HR7161
Reinforced engine pad,
View partHARDRACE Engine bracket HR7162
Reinforced engine pad, fits: TOYOTA ARISTO 3.0 08.97-09.04
View partHARDRACE Track control arm HR7163
Reinforced swingarm, quantity per set: 2, rear axle L/R } (adjustable rubber-metal reinforced bush) fits: INFINITI G, G35 NISSAN 350Z 3.5 09.02-
View partHARDRACE Track control arm HR7164
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09
View partHARDRACE Track control arm HR7165
Reinforced swingarms set, quantity per set: 4, rear L/R } (rubber-metal reinforced bush) fits: MINI (R50, R53), (R52), (R56), (R57), (R58), (R59), CLUBMAN (R55) 1.4-2.0D 06.01-06.15
View partHARDRACE Engine bracket HR7167
Reinforced engine pad 1 pcs, front, fits: MITSUBISHI LANCER VIII, OUTLANDER II 2.0-2.4ALK 11.06-
View partHARDRACE Engine bracket HR7168
Reinforced engine pad, fits: MITSUBISHI OUTLANDER II 2.0-2.4ALK 11.06-11.12
View partHARDRACE Engine bracket HR7169
Reinforced engine pad, fits: MITSUBISHI OUTLANDER II 2.4/2.4ALK 11.06-11.12
View partHARDRACE Track control arm HR7170
Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: MITSUBISHI ECLIPSE CROSS, OUTLANDER II, OUTLANDER III 1.5-2.4H 11.06-
View partHARDRACE Track control arm HR7171
Reinforced swingarm, quantity per set: 2, front axle, top L/R, UNIBALL } (adjusted) fits: INFINITI EX, G, Q50, Q60, QX50 I NISSAN 370Z 2.0-3.7 09.04-
View partHARDRACE Engine bracket HR7172
Reinforced engine pad, fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14
View partHARDRACE Uniball HR7173
Uniball swingarm bushings} fits: SUBARU LEGACY V 2.0-2.5CNG 05.09-12.14
View partHARDRACE Engine bracket HR7174
Reinforced engine pad, fits: TOYOTA ARISTO 3.0 08.97-09.04
View partHARDRACE Polyurethane suspension sleeve HR7175
Reinforced suspension bushings (2pcs, front/swingarm, L/R, rear) LEXUS GS 08.97-12.04
View partHARDRACE Engine bracket HR7176
Reinforced engine pad, fits: TOYOTA ARISTO 3.0 08.97-09.04
View partHARDRACE Uniball HR7177
Uniball swingarm bushings, quantity per set: 2 pcs, rear axle, L/R, longitudinal swingarm} fits: AUDI A1, A3, Q2, Q3, TT SEAT ALTEA, ALTEA XL, ATECA, LEON, LEON SC 1.0-Electric 02.03-
View partHARDRACE Tie rod (with no end) HR7178
Reinforced steering rods,
View partHARDRACE Polyurethane suspension sleeve HR7179
Reinforced suspension bushings (2pcs, reinforced version, trailing arm, L/R, front) fits: AUDI A1, A3, Q2, Q3, TT SEAT ALTEA, ALTEA XL, ATECA, LEON, LEON SC, LEON SPORTSTOURER, LEON ST 02.03-
View partHARDRACE Engine bracket HR7180
Reinforced engine pad, fits: HONDA CIVIC III, CIVIC IV 1.3-1.6 01.84-12.91
View partHARDRACE Tie rod (with no end) HR7182
Reinforced steering end, quantity per set: 2 pcs, L/R fits: HONDA fits: HONDA CIVIC VII, CR-V II 1.3H-2.4 11.00-03.07
View partHARDRACE Tie rod (with no end) HR7183
Reinforced steering rods,
View partHARDRACE Engine bracket HR7184
Reinforced engine pad, fits: NISSAN CUBE 1.5D/1.6 08.09-
View partHARDRACE Engine bracket HR7185
Reinforced engine pad, fits: NISSAN CUBE 1.5D/1.6 08.09-
View partHARDRACE Stabilizer HR7186
Stabilizer, front, 28 mm fits: NISSAN 240SX 2.4 07.88-
View partHARDRACE Stabilizer HR7186K
Stabilizer, front, 28 mm (with connectors) fits: NISSAN 240SX 2.4 07.88-
View partHARDRACE Stabilizer HR7187K
Stabilizer, rear, 22 mm (with connectors) fits: NISSAN 240SX 2.4 07.88-
View partHARDRACE Stabilizer HR7188
Stabilizer, front, 28 mm fits: NISSAN 240SX, SILVIA 2.0/2.4 07.88-
View partHARDRACE Stabilizer HR7188K
Stabilizer, front, 28 mm (with connectors) fits: NISSAN 240SX, SILVIA 2.0/2.4 07.88-
View partHARDRACE Stabilizer HR7189K
Stabilizer, rear, 22 mm (with connectors) fits: NISSAN 240SX, SILVIA 2.0/2.4 07.88-
View partHARDRACE Uniball HR7190
Uniball swingarm bushings}
View partHARDRACE Engine bracket HR7191
Reinforced engine pad, fits: HONDA CIVIC IV 1.3-1.6 09.87-12.91
View partHARDRACE Other elements of suspension system HR7193
View partHARDRACE Other elements of suspension system HR7195
View partHARDRACE Track control arm HR7196
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)
View partHARDRACE Track control arm HR7196-G
Reinforced swingarms set, quantity per set: 2 }
View partHARDRACE Track control arm HR7196-W
Reinforced swingarms set, quantity per set: 2 }
View partBuying with Partios
Buying HARDRACE parts through Partios
Are these genuine HARDRACE parts?
- Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source HARDRACE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.
Do you supply HARDRACE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on HARDRACE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a HARDRACE order?
- It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for HARDRACE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account