Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Polyurethane suspension sleeve HR6908

Reinforced bushing, 2pcs, fits: HONDA JAZZ II, JAZZ III, JAZZ IV 1.2-1.5 03.02-

View part

HARDRACE Polyurethane suspension sleeve HR6909

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR6910

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR6911

Reinforced bushing, 2pcs,

View part

HARDRACE Engine mount HR6912

Engine mount R fits: MAZDA 3 1.6/1.6D 10.03-12.09

View part

HARDRACE Engine bracket HR6913

Reinforced engine pad, fits: AUDI A3 SEAT ALTEA, ALTEA XL, LEON, TOLEDO III SKODA OCTAVIA II, SUPERB II, YETI VW BEETLE, CADDY III FURGON/NADWOZIE WIELKOPRZESTRZENNE, EOS 1.2-3.6 02.03-07.19

View part

HARDRACE Track control arm HR6914

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: AUDI A3 SEAT ALTEA, ALTEA XL, LEON, TOLEDO III SKODA OCTAVIA II 1.2-3.6 02.03-07.19

View part

HARDRACE Stabilizer link HR6915

Reinforces stabilizer bar connector, front axle, L/R, quantity per set: 2 fits: HONDA CIVIC VIII 1.3H/1.8 09.05-12.12

View part

HARDRACE Stabilizer link HR6916

Reinforces stabilizer bar connector, rear axle, L/R, quantity per set: 2 fits: HONDA CIVIC IX, CIVIC VIII 1.3H/1.8 09.05-12.16

View part

HARDRACE Polyurethane suspension sleeve HR6917

Reinforced bushing, 2pcs, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Polyurethane suspension sleeve HR6918

Reinforced suspension bushings (6pcs, front axle, L/R, bottom) fits: HONDA ACCORD IX, ACCORD VIII 06.08-

View part

HARDRACE Suspension ball joint HR6919

Reinforced suspension pin} fits: HONDA ACCORD VI 2.0/2.0D/3.0 02.98-06.03

View part

HARDRACE Engine bracket HR6920

Reinforced engine pad 1 pcs, rear, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Track control arm HR6921

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: TOYOTA ALTEZZA GITA, ARISTO 3.0 08.97-11.05

View part

HARDRACE Track control arm HR6922

Reinforced swingarm, quantity per set: 2, rear, bottom L/R } fits: HONDA CIVIC IV, CIVIC V, CIVIC VI, CRX II, CRX III, INTEGRA 1.3-1.8 09.87-

View part

HARDRACE Suspension ball joint HR6923

Reinforced suspension pin}

View part

HARDRACE Suspension ball joint HR6924

Reinforced suspension pin} fits: HONDA ACCORD VI 2.0/2.0D/3.0 02.98-06.03

View part

HARDRACE Track control arm HR6925

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (no regulation) fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Engine bracket HR6926

Reinforced engine pad,

View part

HARDRACE Polyurethane suspension sleeve HR6929

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Polyurethane suspension sleeve HR6930

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Polyurethane suspension sleeve HR6931

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Polyurethane suspension sleeve HR6932

Reinforced bushing, 2pcs, fits: SUBARU FORESTER, LEGACY III, LEGACY IV 2.0-3.0 10.98-10.12

View part

HARDRACE Uniball HR6933

Uniball swingarm bushings}

View part

HARDRACE Track control arm HR6934

Reinforced swingarms set, quantity per set: 2, rear } (adjusted) fits: NISSAN PRIMERA 1.6-2.2D 06.96-

View part

HARDRACE Engine bracket HR6935

Reinforced engine pad, fits: FORD FOCUS II MAZDA 3, 5 1.8-2.0LPG 10.03-09.12

View part

HARDRACE Track control arm HR6939

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC VI 1.6 04.99-12.00

View part

HARDRACE Stabilizer HR6940

Stabilizer, rear, 17 mm fits: HONDA CR-Z, JAZZ II, JAZZ III 1.2-1.5H 03.02-12.16

View part

HARDRACE Engine bracket HR6943

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY IV, XV 1.6-3.0 09.03-

View part

HARDRACE Track control arm HR6944

Reinforced swingarms set, quantity per set: 4, front, top L/R } (rubber-metal reinforced bush) fits: HONDA CIVIC IV, CIVIC V, CIVIC VI 1.3-2.0D 09.87-03.01

View part

HARDRACE Suspension struts HR6945

Upper suspension bar fits: SUBARU IMPREZA, XV 1.6/2.0/2.0H 10.16-

View part

HARDRACE Uniball HR6946

Uniball swingarm bushings, quantity per set: 2 pcs, front axle/rear axle, L/R, longitudinal swingarm} fits: SUZUKI JIMNY 1.3/1.5/1.5D 09.98-

View part

HARDRACE Uniball HR6947

Uniball swingarm bushings} fits: SUZUKI JIMNY 1.3 11.88-03.98

View part

HARDRACE Engine bracket HR6948

Reinforced engine pad,

View part

HARDRACE Uniball HR6948F

Uniball swingarm bushings}

View part

HARDRACE Polyurethane suspension sleeve HR6949

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR6950

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR6951

Reinforced bushing, 2pcs,

View part

HARDRACE Polyurethane suspension sleeve HR6952

Reinforced bushing, 2pcs,

View part

HARDRACE Engine bracket HR6953

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY III, LEGACY IV, LEGACY V, XV 1.6-3.0 10.98-

View part

HARDRACE Engine bracket HR6954

Reinforced engine pad, fits: SUBARU IMPREZA, LEGACY III, LEGACY IV, XV 1.6-3.0 10.98-

View part

HARDRACE Engine bracket HR6955

Reinforced engine pad, fits: SUBARU FORESTER, LEGACY II, LEGACY OUTBACK 2.0/2.2/2.5 02.94-10.12

View part

HARDRACE Engine bracket HR6959

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY II, LEGACY IV, LEGACY OUTBACK, XV 1.6-3.0 02.94-

View part

HARDRACE Engine bracket HR6962

Reinforced engine pad, fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84), Z4 (E89) 1.6-4.4 06.04-08.16

View part

HARDRACE Track control arm HR6963

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.6-3.0D 06.04-08.16

View part

HARDRACE Suspension ball joint HR6964

Reinforced suspension pin}

View part

HARDRACE Track control arm HR6965-S

Reinforced swingarms set, quantity per set: 2, front, bottom L/R, UNIBALL } (no regulation)

View part

HARDRACE Engine bracket HR6966

Reinforced engine pad,

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account