Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Suspension ball joint HR6804

Reinforced suspension pin, quantity per set: 2 pcs, front, L/R} fits: HONDA CIVIC IX, CIVIC VII, FR-V 1.3H-2.2D 11.00-12.16

View part

HARDRACE Polyurethane suspension sleeve HR6805

Reinforced suspension bushings (22pcs, L/R, front axle/rear axle) fits: HONDA CIVIC VII 11.00-

View part

HARDRACE Engine bracket HR6806

Reinforced engine pad,

View part

HARDRACE Suspension ball joint HR6807

Reinforced suspension pin, quantity per set: 2 pcs, front, L/R} fits: HONDA INTEGRA 2.0 02.02-10.07

View part

HARDRACE Engine bracket HR6808

Reinforced engine pad, fits: HONDA JAZZ III 1.2-1.5 10.07-12.15

View part

HARDRACE Track control arm HR6810

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Engine bracket HR6811

Reinforced engine pad, fits: HONDA ACCORD VI 2.0/2.0D/3.0 02.98-06.03

View part

HARDRACE Engine bracket HR6812

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6813

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6814

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6815

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6816

Reinforced engine pad,

View part

HARDRACE Track control arm HR6818

Reinforced swingarms set, quantity per set: 6, rear, bottom L/R } (strengthened sleeves) fits: TOYOTA COROLLA 1.3-2.0D 05.92-01.02

View part

HARDRACE Track control arm HR6819

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), E (A124), E (C124) 1.8-6.0 03.93-05.08

View part

HARDRACE Track control arm HR6819-R

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), E (A124) 1.8-6.0 03.93-05.08

View part

HARDRACE Engine bracket HR6821-R

Reinforced engine pad, fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Uniball HR6822

Uniball swingarm bushings} fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Uniball HR6823

Uniball swingarm bushings} fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Suspension ball joint HR6824

Reinforced suspension pin} fits: INFINITI G NISSAN 350Z 3.5 09.02-12.09

View part

HARDRACE Track control arm HR6827

Reinforced swingarm, quantity per set: 2, rear axle, bottom/front L/R } (adjustable) fits: HONDA CIVIC IV, CRX II, INTEGRA 1.3-1.8 09.87-

View part

HARDRACE Suspension ball joint HR6828

Reinforced suspension pin}

View part

HARDRACE Engine bracket HR6829

Reinforced engine pad,

View part

HARDRACE Wheel suspension track control arm, rear HR6830

Rear axle track control arm L (adjustable) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 1.6-4.4 06.04-06.15

View part

HARDRACE Wheel suspension track control arm, rear HR6831

Rear axle track control arm L/R (top, adjustable) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93), X1 (E84) 1.6-4.4 06.04-06.15

View part

HARDRACE Track control arm HR6832

Reinforced swingarm, quantity per set: 2, rear axle, rear/top L/R, UNIBALL } (not for M-Series) fits: BMW 1 (E81), 1 (E82), 1 (E87), 1 (E88), 3 (E90), 3 (E91), 3 (E92), 3 (E93) 1.6-3.0D 06.04-06.15

View part

HARDRACE Track control arm HR6833

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (rubber-metal reinforced bush) fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Track control arm HR6833-H

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Track control arm HR6834

Reinforced swingarms set, quantity per set: 2, rear, top L/R } (rubber-metal reinforced bush) fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Track control arm HR6834-H

Reinforced swingarms set, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted) fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Track control arm HR6835

Reinforced swingarm, quantity per set: 2, rear axle L/R, UNIBALL } (adjustable) fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Track control arm HR6836

Reinforced swingarm, quantity per set: 2, rear L/R } (adjustable) fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Track control arm HR6837

Reinforced swingarm, quantity per set: 2, rear axle L/R, UNIBALL } (adjusted) fits: NISSAN GT-R 3.8 12.07-08.25

View part

HARDRACE Suspension ball joint HR6838

Reinforced suspension pin} fits: TOYOTA ALTEZZA GITA, CHASER 2.5/3.0 10.92-11.05

View part

HARDRACE Engine bracket HR6840

Reinforced engine pad, fits: SUBARU FORESTER, IMPREZA, LEGACY IV, XV 1.6-3.0 09.03-

View part

HARDRACE Engine bracket HR6841

Reinforced engine pad, fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Engine bracket HR6842

Reinforced engine pad, fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Uniball HR6842F

Uniball swingarm bushings} fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Engine bracket HR6843

Reinforced engine pad, fits: SUBARU LEGACY III, LEGACY IV 2.0-3.0 10.98-12.09

View part

HARDRACE Track control arm HR6844

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Track control arm HR6845

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Track control arm HR6846

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted) fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Engine bracket HR6847

Reinforced engine pad, fits: TOYOTA CHASER 2.5 10.92-08.96

View part

HARDRACE Engine bracket HR6848

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Track control arm HR6849

Reinforced swingarms set, quantity per set: 4, front, bottom L/R } (rubber-metal reinforced bush) fits: BMW 3 (E36), Z3 (E36) 1.6-3.0 09.90-06.03

View part

HARDRACE Track control arm HR6850-S

Reinforced swingarms set, quantity per set: 4, front, bottom L/R, UNIBALL } (adjusted) fits: BMW 3 (E46), Z3 (E36), Z4 (E85), Z4 (E86) 1.6-3.0D 11.95-02.09

View part

HARDRACE Stabilizer link HR6853-080

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: NISSAN MURANO I 3.5 08.03-09.08

View part

HARDRACE Stabilizer link HR6853-100

Reinforces stabilizer bar connector, front/rear, L/R, quantity per set: 2 (adjustable, length: 100-110mm M10) fits: HONDA ACCORD VII INFINITI G, G35, M45 NISSAN 350Z, 370Z 2.0-4.5 08.97-

View part

HARDRACE Stabilizer link HR6853-130

Reinforces stabilizer bar connector, L/R, quantity per set: 2

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account