Partios Wholesale catalogue

Hardrace Distributor | Suspension & Steering

Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)

3,272 current catalogue lines

About the HARDRACE range

Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HARDRACE Engine bracket HR6672

Reinforced engine pad, fits: MAZDA 6 1.8-2.3 01.02-02.08

View part

HARDRACE Track control arm HR6674

Reinforced swingarms set, quantity per set: 2, rear axle, top L/R } (rubber-metal reinforced bush) fits: MAZDA MX-5 I, MX-5 II 1.6/1.8 05.90-10.05

View part

HARDRACE Track control arm HR6675

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Engine bracket HR6676

Set of reinforced pads 4 pcs, front/left/rear/right, fits: HONDA CIVIC VII, INTEGRA 2.0 09.01-10.07

View part

HARDRACE Stabilizer link HR6677

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: VOLVO C70 II FORD FOCUS II MAZDA 3, 5 1.3-2.5 10.03-09.14

View part

HARDRACE Engine bracket HR6678

Reinforced engine pad, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Uniball HR6678F

Uniball swingarm bushings} fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Engine bracket HR6684

Reinforced engine pad, fits: TOYOTA ARISTO 3.0 10.90-07.97

View part

HARDRACE Engine bracket HR6684-R

Reinforced engine pad, fits: TOYOTA ALTEZZA GITA 3.0 07.01-11.05

View part

HARDRACE Polyurethane suspension sleeve HR6685

Reinforced suspension bushings (4pcs, front axle, L/R, top, inner diameter 10,1mm) fits: HONDA ACCORD VII, ACCORD VIII 09.02-06.15

View part

HARDRACE Engine bracket HR6686

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6687

Reinforced engine pad, fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Engine bracket HR6687-S

Reinforced engine pad, fits: TOYOTA SUPRA 3.0 05.93-07.02

View part

HARDRACE Engine bracket HR6689

Reinforced engine pad, fits: TOYOTA SUPRA 3.0 01.86-05.93

View part

HARDRACE Engine bracket HR6690

Reinforced engine pad, fits: HONDA JAZZ II 1.2/1.3/1.4 03.02-10.08

View part

HARDRACE Engine bracket HR6691

Reinforced engine pad,

View part

HARDRACE Uniball HR6691F

Uniball swingarm bushings}

View part

HARDRACE Engine bracket HR6692

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6693

Reinforced engine pad,

View part

HARDRACE Track control arm HR6697

Reinforced swingarms set, quantity per set: 4, rear axle, bottom L/R } (rubber-metal reinforced bush) fits: HONDA ACCORD VII 2.0/2.2D/2.4 09.02-05.08

View part

HARDRACE Track control arm HR6698

Reinforced swingarms set, quantity per set: 2, front L/R, UNIBALL } (adjusted)

View part

HARDRACE Screws and pins HR6701

View part

HARDRACE Screws and pins HR6702

View part

HARDRACE Screws and pins HR6703

View part

HARDRACE Screws and pins HR6704

View part

HARDRACE Suspension fitting elements HR6705

Screws and pins

View part

HARDRACE Stabilizer link HR6706

Reinforces stabilizer bar connector, L/R, quantity per set: 2

View part

HARDRACE Engine bracket HR6707

Reinforced engine pad,

View part

HARDRACE Engine bracket HR6708

Reinforced engine pad,

View part

HARDRACE Stabilizer link HR6709

Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: VOLVO V40 FORD FOCUS II, FOCUS III MAZDA 3, 5 1.0-2.5 10.03-02.20

View part

HARDRACE Tie rod (with no end) HR6710-S

Reinforced steering rods,

View part

HARDRACE Track control arm HR6712

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R } (adjusted)

View part

HARDRACE Track control arm HR6713

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR6714

Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR6715

Reinforced swingarms set, quantity per set: 2, rear, top L/R, UNIBALL } (adjusted)

View part

HARDRACE Track control arm HR6716

Reinforced swingarms set, quantity per set: 2, front axle, top L/R } (adjustable) fits: HONDA ACCORD VII 2.0/2.2D/2.4 09.02-05.08

View part

HARDRACE Track control arm HR6719

Reinforced swingarm, quantity per set: 2, rear axle, bottom/rear L/R, UNIBALL } (adjustable) fits: MAZDA MX-5 III, RX-8 1.3/1.8/2.0 08.03-12.14

View part

HARDRACE Track control arm HR6720

Reinforced swingarm, quantity per set: 2, rear axle L/R, UNIBALL } (adjustable) fits: MAZDA MX-5 III, RX-8 1.3/1.8/2.0 08.03-12.14

View part

HARDRACE Track control arm HR6721

Reinforced swingarm, quantity per set: 2, rear axle, bottom/front L/R, UNIBALL } (adjustable) fits: MAZDA MX-5 III, RX-8 1.3/1.8/2.0 08.03-12.14

View part

HARDRACE Track control arm HR6722

Reinforced swingarm, quantity per set: 2, rear axle, front/top L/R, UNIBALL } (adjusted) fits: MAZDA MX-5 III, RX-8 1.3/1.8/2.0 08.03-12.14

View part

HARDRACE Track control arm HR6723

Reinforced swingarm, quantity per set: 2, rear axle, rear/top L/R, UNIBALL } (adjusted) fits: MAZDA MX-5 III, RX-8 1.3/1.8/2.0 08.03-12.14

View part

HARDRACE Wheel suspension track control arm, rear HR6724

Rear axle track control arm L/R fits: HONDA ACCORD VIII 2.0-3.5 06.08-06.15

View part

HARDRACE Track control arm HR6725-S

Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6726

Reinforced swingarms set, quantity per set: 2, rear axle, top L/R, UNIBALL } (adjusted) fits: MITSUBISHI LANCER VI, LANCER VII, LANCER VIII 2.0/2.0D 09.95-

View part

HARDRACE Track control arm HR6727

Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)

View part

HARDRACE Engine bracket HR6729

Reinforced engine pad, fits: MITSUBISHI LANCER VI, LANCER VII 2.0/2.0D 09.95-09.07

View part

HARDRACE Track control arm HR6731

Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush)

View part

HARDRACE Track control arm HR6732

Reinforced swingarm, quantity per set: 2, rear axle L/R } (adjustable rubber-metal reinforced bush) fits: HONDA CR-V III, CR-V IV 1.6D-2.4 06.06-12.18

View part

Buying with Partios

Buying HARDRACE parts through Partios

Are these genuine HARDRACE parts?

Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HARDRACE parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.

Do you supply HARDRACE parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HARDRACE parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HARDRACE order?

It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HARDRACE parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account