Partios Wholesale catalogue
Hardrace Distributor | Suspension & Steering
Track control arm (801) · Engine bracket (520) · Suspension struts (364) · Stabilizer (286) · Polyurethane suspension sleeve (274) · Stabilizer link (207) · Suspension ball joint (131) · Other suspension system components (110) · 30 further part types (579)
3,272 current catalogue lines
About the HARDRACE range
Hardrace covers suspension & steering at Partios. It has 3,272 lines across 38 part types, rather than depth in a single one. The largest groups are track control arm (801), engine bracket (520), suspension struts (364), stabilizer (286) and polyurethane suspension sleeve (274). Beyond those, 820 lines are spread across 32 further part types. That tail includes suspension ball joint, other suspension system components and uniball. Typical buyers are workshops, suspension specialists, motor factors and exporters, where suspension and steering parts are commonly replaced in pairs, so matched availability across an axle is the practical constraint. At 3,272 lines the range covers most common applications in this area.
Catalogue products
Vehicle references are indicative — confirm against the article number.
HARDRACE Track control arm HR6455
Control arm repair kit, quantity per set: 6, rear axle, bottom L/R, UNIBALL } (pivot set strengthened sleeves with connectors) fits: MITSUBISHI 3000 GT 3.0 01.90-08.99
View partHARDRACE Track control arm HR6457
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: VOLVO C70 II, V40 FORD FOCUS I, FOCUS II, FOCUS III MAZDA 3, 5 1.0-2.5 10.98-
View partHARDRACE Track control arm HR6457-S
Reinforced swingarms set, quantity per set: 2, rear L/R } (rubber-metal reinforced bush) fits: VOLVO C70 II, V40 FORD FOCUS I, FOCUS II, FOCUS III MAZDA 3, 5 1.0-2.5 10.98-
View partHARDRACE Track control arm HR6460
Reinforced swingarms set, quantity per set: 2, front, bottom L/R } (rubber-metal reinforced bush)
View partHARDRACE Track control arm HR6462
Reinforced swingarm, quantity per set: 2, rear axle, bottom/rear L/R, UNIBALL } (adjustable) fits: TOYOTA MR2 III 1.8 10.99-06.07
View partHARDRACE Uniball HR6463
Uniball swingarm bushings} fits: HONDA CIVIC VI 1.6 11.98-03.01
View partHARDRACE Suspension ball joint HR6464
Reinforced suspension pin} fits: NISSAN SILVIA 2.0 01.91-09.93
View partHARDRACE Suspension ball joint HR6465
Reinforced suspension pin} fits: NISSAN SILVIA 2.0 01.91-09.93
View partHARDRACE Suspension ball joint HR6466
Reinforced suspension pin}
View partHARDRACE Track control arm HR6467
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: VOLVO C70 II, V40 FORD FOCUS I, FOCUS II, FOCUS III MAZDA 3, 5 1.0-2.5 10.98-
View partHARDRACE Engine bracket HR6468
Reinforced engine pad,
View partHARDRACE Engine bracket HR6469
Reinforced engine pad,
View partHARDRACE Engine bracket HR6470
Reinforced engine pad,
View partHARDRACE Track control arm HR6471
Reinforced swingarms set, quantity per set: 2, front, top L/R, UNIBALL } (adjusted) fits: NISSAN SKYLINE 2.0/2.5 07.93-07.00
View partHARDRACE Tie rod (with no end) HR6472
Reinforced steering rods,
View partHARDRACE Polyurethane suspension sleeve HR6473
Polyurethane stabilizer bushing (2pcs, rear axle/stabilizer, L/R, inside, inner diameter 12mm) fits: HONDA ACCORD VI, CIVIC VII 10.98-
View partHARDRACE Track control arm HR6474
Reinforced swingarms set, quantity per set: 2, rear axle, bottom L/R } (rubber-metal reinforced bush)
View partHARDRACE Suspension ball joint HR6476
Reinforced suspension pin, quantity per set: 2 pcs, front, L/R} fits: HONDA CIVIC IX, CIVIC VII, FR-V 1.3H-2.2D 11.00-12.16
View partHARDRACE Track control arm HR6477
Reinforced swingarms set, quantity per set: 2, rear L/R, UNIBALL } (adjusted) fits: TOYOTA SUPRA 3.0 05.93-07.02
View partHARDRACE Track control arm HR6478
Reinforced swingarms set, quantity per set: 2, rear, bottom L/R, UNIBALL } (adjusted)
View partHARDRACE Stabilizer link HR6480
Reinforces stabilizer bar connector, L/R, quantity per set: 2 fits: HONDA CIVIC V, CIVIC VI 1.5/1.6 01.92-12.96
View partHARDRACE Tie rod (with no end) HR6481
Reinforced steering rods,
View partHARDRACE Stabilizer link HR6482
Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: HYUNDAI ELANTRA V NISSAN JUKE TOYOTA CELICA, COROLLA, COROLLA VERSO 1.2-2.0D 08.99-
View partHARDRACE Stabilizer link HR6488
Reinforces stabilizer bar connector, front, L/R, quantity per set: 2 fits: HONDA PRELUDE IV 2.0/2.2/2.3 02.92-09.96
View partHARDRACE Polyurethane suspension sleeve HR6489
Rear Swingarm bushings, quantity per set: 6pcs fits: HONDA PRELUDE IV, PRELUDE V 02.92-12.01
View partHARDRACE Uniball HR6489F
Uniball swingarm bushings}
View partHARDRACE Engine bracket HR6490
Reinforced engine pad,
View partHARDRACE Uniball HR6490F
Uniball swingarm bushings}
View partHARDRACE Stabilizer link HR6491
Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: HONDA PRELUDE IV 2.0/2.2/2.3 02.92-09.96
View partHARDRACE Stabilizer link HR6492
Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: HONDA PRELUDE V 2.0/2.2 10.96-12.01
View partHARDRACE Shock absorber upper mount HR6495
Shock absorber upper mount, quantity per set: 2 pcs, front, L/R}, fits: SUBARU BRZ 1.5 AWD (GD3)/1.5 AWD (GG3)/1.6 (GC4)/1.6 AWD/1.6 AWD (GC4)/1.6 AWD (GD5)/1.6 i (GC3)/1.6 i (GF3)/1.6 i AWD (GC4)/1.6
View partHARDRACE Shock absorber upper mount HR6496
Shock absorber upper mount, quantity per set: 2 pcs, rear, L/R}, fits: SUBARU IMPREZA 1.6 AWD (GC4)/1.6 i AWD (GC4)/1.6 i AWD (GF4)/1.8 i AWD (GC6)/1.8 i AWD (GF6)/1800 4WD (BF3)/2.0 AWD (GC8)/2.0 AWD
View partHARDRACE Polyurethane suspension sleeve HR6511
Polyurethane stabilizer bushing (2pcs, front axle/stabilizer, L/R, inside, inner diameter 25mm) fits: NISSAN 240SX 07.88-
View partHARDRACE Polyurethane suspension sleeve HR6512
Polyurethane stabilizer bushing (2pcs, rear axle/stabilizer, inside, inner diameter 16mm) fits: NISSAN 240SX 07.88-
View partHARDRACE Polyurethane suspension sleeve HR6513
Polyurethane stabilizer bushing (2pcs, front axle/stabilizer, inside, inner diameter 28mm) fits: INFINITI Q45 II NISSAN 200SX, SILVIA 10.93-12.03
View partHARDRACE Polyurethane suspension sleeve HR6514
Polyurethane stabilizer bushing (2pcs, rear axle/stabilizer, L/R, inside, inner diameter 16mm) fits: INFINITI Q45 II NISSAN 200SX, SILVIA 10.93-12.03
View partHARDRACE Track control arm HR6515
Reinforced swingarm, quantity per set: 2, rear axle, top L/R } (rubber-metal reinforced bush) fits: MITSUBISHI OUTLANDER III 2.0 08.12-12.22
View partHARDRACE Stabilizer link HR6516
Reinforces stabilizer bar connector, rear, L/R, quantity per set: 2 fits: MITSUBISHI LANCER CARGO, LANCER VII 1.3/1.6/2.0 06.00-12.13
View partHARDRACE Polyurethane suspension sleeve HR6539
Reinforced bushing (4pcs, top front swingarm, L/R) fits: MITSUBISHI ECLIPSE II, ECLIPSE III, GALANT VIII 12.95-
View partHARDRACE Polyurethane suspension sleeve HR6545
Reinforced bushing, 2pcs, transverse track control arm, L/R, inside, fits: MITSUBISHI GALANT VIII 2.0-3.0 08.96-
View partHARDRACE Polyurethane suspension sleeve HR6546
Front swingarm bushing (4pcs, reinforced version, front axle, L/R, bottom) fits: LEXUS IS I TOYOTA ALTEZZA, ALTEZZA GITA, BREVIS, CHASER, CRESTA V, CROWN, MARK II, MARK II IX 10.91-07.07
View partHARDRACE Polyurethane suspension sleeve HR6546-A
Polyurethane bushing, fits: TOYOTA ALTEZZA GITA 3.0 07.01-11.05
View partHARDRACE Polyurethane suspension sleeve HR6546-B
Polyurethane bushing, fits: TOYOTA ALTEZZA GITA 3.0 07.01-11.05
View partHARDRACE Polyurethane suspension sleeve HR6547
Reinforced bushing (4pcs, front axle, L/R, top) LEXUS IS I 04.99-07.05
View partHARDRACE Suspension ball joint HR6547-BJ
Reinforced suspension pin} fits: LEXUS GS TOYOTA ALTEZZA GITA, CHASER 2.5/3.0/5.0 10.92-
View partHARDRACE Engine bracket HR6549
Reinforced engine pad 2 pcs, front/left/rear/right,
View partHARDRACE Engine bracket HR6557
Reinforced engine pad,
View partHARDRACE Tie rod (with no end) HR6565
Reinforced steering end, quantity per set: 2 pcs, L/R fits: HONDA fits: HONDA CIVIC II, CIVIC IV, CIVIC V, CIVIC VI, CR-V I, CRX II, CRX III MG MG ZS ROVER 400, 400 II, 45 I 1.2-2.5 09.87-10.05
View partBuying with Partios
Buying HARDRACE parts through Partios
Are these genuine HARDRACE parts?
- Yes. Every HARDRACE line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source HARDRACE parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HARDRACE lines that aren't currently available.
Do you supply HARDRACE parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on HARDRACE parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a HARDRACE order?
- It depends on the line. Stocked HARDRACE items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for HARDRACE parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some HARDRACE lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account