Partios Wholesale catalogue
Hans Pries Distributor | Parts
Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)
22,627 current catalogue lines
About the HANS PRIES range
Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
HANS PRIES Tie rod (with no end) 821 441
Tie rod (with no end) L/R (length: 179mm, with a nut) fits: HYUNDAI ELANTRA IV, ELANTRA V, I30 KIA CEE'D, CERATO II, CERATO KOUP II, PRO CEE'D 1.4-2.0LPG 06.06-12.15
View partHANS PRIES Tie rod (with no end) 821 452
Tie rod (with no end) L/R (length: 260mm) fits: HYUNDAI TUCSON KIA SPORTAGE II 2.0-2.7 06.04-01.12
View partHANS PRIES Stabilizer link 821 453
Stabilizer link rear L/R 180mm fits: HYUNDAI ELANTRA IV, I30 KIA CARENS III, MAGENTIS II 1.4-2.7 11.05-12.13
View partHANS PRIES Brake master cylinder 821 466
Brake master cylinder (22,2mm), vehicle with the steering wheel on the left side fits: KIA RIO I 1.3/1.5 08.00-02.05
View partHANS PRIES Brake master cylinder 821 469
Brake master cylinder (22,2mm) fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.6 03.05-12.11
View partHANS PRIES Brake master cylinder 821 472
Brake master cylinder (22,2mm), vehicle with the steering wheel on the left side fits: HYUNDAI IX35 KIA SPORTAGE III 1.6-2.4 08.09-12.16
View partHANS PRIES Clutch servo 821 473
Clutch actuator (20,64mm) fits: KIA CERATO I 1.5D/1.6/1.6D 06.05-12.09
View partHANS PRIES Windscreen washer pump 821 479
Windscreen washer pump front (12V, visor) fits: HYUNDAI ACCENT V, ELANTRA V, I10 II, I20 II, IX35, VELOSTER KIA OPTIMA, PICANTO II, QUORIS I, SPORTAGE III COUPE-SUV 08.09-
View partHANS PRIES Clutch release bearing 821 482
Clutch thrust bearing fits: HYUNDAI ATOS, I10 I, I10 II, I10 III, I20 I, I20 II KIA PICANTO I, PICANTO II, RIO III 1.0-1.2LPG 02.98-
View partHANS PRIES Clutch release bearing 821 486
Clutch thrust bearing fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, ELANTRA V, ELANTRA VI, GETZ, I20 ACTIVE, I20 I, I20 II, I30, I40 I, I40 I CW, IX20, IX35, KONA, MATRIX, SOLARIS 04.04-
View partHANS PRIES Multi-V-belt 821 513 001
Multi-V-belt (6PK2140)
View partHANS PRIES Multi-V-belt 821 514
Multi-V-belt (6
View partHANS PRIES Rocker arm 821 553
Rocker arm fits: HYUNDAI ACCENT II, ELANTRA III, GETZ, I30, MATRIX, SANTA FÉ I, SANTA FÉ II, SONATA V, TRAJET, TUCSON KIA CARENS I, CARENS III, CEE'D, CERATO I 1.5D/2.0D/2.2D 04.01-03.13
View partHANS PRIES Multi V-belt pulley 821 559
Multi V-belt pulley fits: HYUNDAI ACCENT IV, CRETA, ELANTRA IV, ELANTRA V, ELANTRA VI, I20 I, I20 II, I30, I40 I, I40 I CW, IX20, IX35, KONA, SOLARIS, TUCSON, VELOSTER 1.2-2.0D 01.06-
View partHANS PRIES Gas spring 821 560
Gas spring trunk lid L/R max length: 537mm, stroke:206mm fits: HYUNDAI ACCENT III HATCHBACK 11.05-11.10
View partHANS PRIES Windscreen washer pump 821 562
Windscreen washer pump front (12V, visor) fits: HYUNDAI H-1, H-1 / STAREX AUTOBUS/FURGON/PLATFORMA / PODWOZIE 06.97-12.07
View partHANS PRIES Windscreen washer pump 821 563
Windscreen washer pump front (12V) fits: DAEWOO EVANDA HYUNDAI ELANTRA III, H-1, H-1 / STAREX, SONATA IV KIA K2500, K2700, K2900, MAGENTIS I TOYOTA AVENSIS, COROLLA, YARIS AUTOBUS-SEDAN 06.97-
View partHANS PRIES Light regulation 821 577
Headlight height adjuster L/R fits: HYUNDAI ELANTRA V, I30, IX35, IX55, SANTA FÉ II, SONATA V, SONATA VI KIA CARENS III, CARENS IV, CARNIVAL III, CEE'D, PRO CEE'D, RIO III, SORENTO I 08.02-
View partHANS PRIES ABS sensor 821 583
ABS sensor front L fits: HYUNDAI ACCENT III KIA RIO II 1.4/1.5D/1.6 03.05-12.11
View partHANS PRIES ABS sensor 821 584
ABS sensor front R fits: KIA RIO II 1.4/1.5D/1.6 03.05-12.11
View partHANS PRIES Camshaft position sensor 821 629
Camshaft position sensor fits: HYUNDAI ACCENT II, ACCENT III, GETZ, MATRIX 1.3-1.6 09.99-12.10
View partHANS PRIES Camshaft position sensor 821 630
Camshaft position sensor fits: HYUNDAI ACCENT II, ELANTRA III, GETZ, MATRIX, SANTA FÉ I, TRAJET, TUCSON KIA CARENS I, CERATO I, SPORTAGE II 1.5D/2.0D 04.01-08.10
View partHANS PRIES Camshaft position sensor 821 631
Camshaft position sensor fits: HYUNDAI ACCENT IV, ELANTRA IV, ELANTRA V, ELANTRA VII, I10 I, I10 II, I20 I, I20 II, I30, I40 I, I40 I CW, IX20, IX35, TUCSON KIA CARENS III 1.2-1.6LPG 01.06-
View partHANS PRIES Crankshaft sensor 821 632
Crankshaft position sensor fits: HYUNDAI ACCENT II, ACCENT III, ELANTRA III, GETZ, MATRIX KIA CERATO I, RIO II 1.3-1.6 09.99-12.11
View partHANS PRIES Intake manifold pressure sensor 821 633
Intake manifold pressure sensor (4 pin) fits: HYUNDAI ACCENT II, ACCENT III, ATOS, ELANTRA III, ELANTRA IV, GETZ, I10 I, I30, MATRIX, SANTA FÉ I, SONATA IV, TRAJET, TUCSON 1.0-2.0LPG 02.98-12.13
View partHANS PRIES Tie rod end 821 637
Tie rod end R fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17
View partHANS PRIES Tie rod end 821 638
Tie rod end L fits: KIA PICANTO II 1.0/1.0LPG/1.2 05.11-03.17
View partHANS PRIES Front ball joint 821 639
Axle ball joint L/R (bottom front) (cone diameter 15,05mm) fits: HYUNDAI I30 KIA CEE'D, PICANTO III, PRO CEE'D 1.2-2.0LPG 12.06-
View partHANS PRIES MacPherson strut mount 821 650
MacPherson strut mount front L/R (with a bearing) fits: HYUNDAI ACCENT IV, I20 I, IX20 KIA PICANTO II, RIO III, VENGA 1.0-1.6LPG 08.08-
View partHANS PRIES Oil sump 821 662
Oil sump (steel) fits: HYUNDAI ACCENT IV, CRETA, ELANTRA IV, ELANTRA V, I20 I, I30, IX20, IX35, VELOSTER KIA CARENS III, CEE'D, CEED, CERATO I, CERATO II, CERATO III 1.4-1.6LPG 04.04-
View partHANS PRIES Speed sensor 821 676
Speed sensor fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA III, ELANTRA IV, ELANTRA V, GETZ, H-1, H-1 CARGO, H-1 TRAVEL, H100, I10 I, I20 I, I30, IX20, IX35, MATRIX 4D56-T-J3(CRDi) 03.98-
View partHANS PRIES Speed sensor 821 677
Speed sensor fits: HYUNDAI ELANTRA III, SONATA IV, SONATA V KIA CARENS I, CERATO I, MAGENTIS I, MAGENTIS II 1.8-2.7 03.98-12.10
View partHANS PRIES Multi V-belt pulley 821 678
Multi V-belt pulley (steel) fits: HYUNDAI GRANDEUR, IX35, SANTA FÉ II, SANTA FÉ III, SONATA V, SONATA VI KIA CARENS III, CERATO II, MAGENTIS II, OPTIMA, SORENTO II 2.0-2.4LPG 01.05-12.19
View partHANS PRIES Steering gear boot 821 688 001
Steering gear boot L/R (length170mm 12mm/49mm)
View partHANS PRIES Timing gear controller 821 689
Camshaft phasing unit fits: KIA CEE'D, CERATO I, PRO CEE'D, SPORTAGE II 2.0/2.0LPG 03.04-12.12
View partHANS PRIES Timing gear controller 821 691
Camshaft phasing unit fits: HYUNDAI ACCENT III KIA RIO II 1.6 03.05-12.11
View partHANS PRIES Timing gear controller 821 692
Camshaft phasing unit fits: HYUNDAI H-1 CARGO, IX35, SANTA FÉ II, SANTA FÉ III, SONATA VI KIA CARENS III, CERATO II, OPTIMA, SORENTO II, SORENTO III, SPORTAGE III 2.0-2.4LPG 09.06-
View partHANS PRIES Timing gear controller 821 693
Camshaft phasing unit fits: HYUNDAI GRANDEUR, IX35, SANTA FÉ II, SANTA FÉ III, SONATA VI KIA OPTIMA, SORENTO II, SORENTO III, SPORTAGE III 2.0/2.4/2.4LPG 08.09-12.20
View partHANS PRIES Timing gear controller 821 694
Camshaft phasing unit fits: HYUNDAI ACCENT IV, ELANTRA IV, I20 I, I30, IX20, IX35 KIA CARENS III, CEE'D, CERATO I, CERATO II, PRO CEE'D, SOUL I, SPORTAGE III, VENGA 1.4/1.4LPG/1.6 01.06-
View partHANS PRIES Timing gear controller 821 695
Camshaft phasing unit fits: HYUNDAI H-1 CARGO, IX35, SANTA FÉ II, SONATA V, SONATA VI KIA CARENS III, CERATO II, MAGENTIS II, OPTIMA, SORENTO II, SPORTAGE III 2.0-2.4LPG 01.05-
View partHANS PRIES Crankshaft pulley 821 696
Crankshaft pulley (number of ribs: 5) fits: HYUNDAI ACCENT III, ACCENT IV, ELANTRA IV, GETZ, I10 I, I20 I, I30, IX20, IX35, MATRIX KIA CARENS III, CEE'D, CERATO I, PICANTO I 1.1D-1.7D 07.04-
View partHANS PRIES Crankshaft pulley 821 700
Crankshaft pulley (number of ribs: 6) fits: HYUNDAI ELANTRA III, I30, SANTA FÉ I, SANTA FÉ II, SONATA V, TRAJET, TUCSON KIA CARENS I, CARENS III, CEE'D, CERATO I, MAGENTIS II 2.0D/2.2D 04.01-12.15
View partHANS PRIES Stabilizer link 821 701
Stabilizer link front L/R fits: HYUNDAI ACCENT IV, ELANTRA V, I30, VELOSTER KIA CEE'D, CERATO III, PRO CEE'D, RIO III, SOUL II 1.0-Electric 09.10-
View partHANS PRIES Transmission seal 821 704
Gearbox gasket fits: HYUNDAI GRAND SANTA FÉ, IX35, IX55, SANTA FÉ II, SANTA FÉ III KIA CARNIVAL III, OPTIMA, SORENTO II, SORENTO III, SPORTAGE III, SPORTAGE IV 09.08-09.22
View partHANS PRIES Stabilizer link 821 707
Stabilizer link rear L/R 126mm fits: HYUNDAI I40 I, I40 I CW 1.6-2.0 07.11-05.19
View partHANS PRIES Multi-V-belt 821 709
Multi-V-belt (6PK1257)
View partHANS PRIES Multi-V-belt 821 710 001
Multi-V-belt (6PK953)
View partHANS PRIES Crankshaft pulley 821 711
Crankshaft pulley (number of ribs: 5) fits: HYUNDAI GRAND SANTA FÉ, IX35, SANTA FE IV, SANTA FÉ II, SANTA FÉ III, TUCSON KIA CARNIVAL III, SORENTO II, SORENTO III 2.0D/2.0DH/2.2D 03.06-12.23
View partBuying with Partios
Buying HANS PRIES parts through Partios
Are these genuine HANS PRIES parts?
- Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source HANS PRIES parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.
Do you supply HANS PRIES parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on HANS PRIES parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a HANS PRIES order?
- It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for HANS PRIES parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account