Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Tie rod (with no end) 722 816

Tie rod (with no end) L/R (length: 294mm) fits: CITROEN C4 II, DS4 PEUGEOT 3008, 3008 I, 308, 308 I, 5008, 5008 I 1.2-2.0DH 09.07-

View part

HANS PRIES Steering gear hydraulic pump 722 817

Hydraulic pump, power steering (new) fits: PEUGEOT 206, 206+, PARTNER 1.1-1.6LPG 06.96-

View part

HANS PRIES Steering gear boot 722 820

Steering gear boot R (length134mm 20mm/38mm) fits: CITROEN SAXO PEUGEOT 106 I, 106 II 1.0-Electric 08.91-07.04

View part

HANS PRIES Valve cover gasket 722 822

Rocker cover gasket fits: CITROEN C5 II, C5 III, C6, C8, C-CROSSER FIAT ULYSSE FORD GALAXY II, MONDEO IV, S-MAX LANCIA PHEDRA LAND ROVER DISCOVERY SPORT, FREELANDER 2 2.2D 03.06-

View part

HANS PRIES Tie rod (with no end) 722 827

Tie rod (with no end) L/R (length: 145mm) fits: CITROEN C5 III PEUGEOT 508, 508 I 1.6-3.0D 02.08-

View part

HANS PRIES Tie rod (with no end) 722 828

Tie rod (with no end) L/R (length: 280mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE PEUGEOT PARTNER 1.2-Electric 04.08-

View part

HANS PRIES Tie rod (with no end) 722 829

Tie rod (with no end) L/R (length: 261mm) fits: DS DS 3 CITROEN C3 II, DS3 RENAULT ESPACE IV, VEL SATIS 1.0-3.5 06.02-07.19

View part

HANS PRIES Tie rod (with no end) 722 831

Tie rod (with no end) L/R (length: 226mm) fits: PEUGEOT 508, 508 I 1.6-2.2D 11.10-12.18

View part

HANS PRIES Brake disc 722 834

Brake disc rear L/R fits: MITSUBISHI OUTLANDER II 2.0D/2.2D 02.07-11.12

View part

HANS PRIES Brake disc 722 835

Brake disc front L/R fits: DS DS 3 / DS 3, DS 4, DS 5 CITROEN C4, C4 I, C4 II, C4 III, DS4, DS5 OPEL CORSA F, MOKKA PEUGEOT 2008 II, 208, 208 I, 208 II, 3008 I, 308, 308 I 1.0-Electric 11.04-

View part

HANS PRIES Brake disc 722 836

Brake disc front L/R fits: CITROEN C-CROSSER, C-CROSSER ENTERPRISE MITSUBISHI LANCER VIII, OUTLANDER I, OUTLANDER II, OUTLANDER III PEUGEOT 4007 2.0-3.0 03.01-

View part

HANS PRIES Brake disc 722 837

Brake disc front L/R fits: DS DS 4, DS 5 CITROEN DS4, DS5 PEUGEOT 308, 308 I 1.6-2.0DH 07.10-12.18

View part

HANS PRIES Radiator fan 722 839

Radiator fan L/R fits: CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C5 II, XSARA PICASSO FIAT SCUDO PEUGEOT 406, 607 1.6-3.0 06.98-03.16

View part

HANS PRIES Radiator fan 722 841

Radiator fan L/R fits: DS DS 4 CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C4, C4 I, C4 II, DS4 PEUGEOT 307, 308 I 1.2-2.0D 07.98-

View part

HANS PRIES MacPherson strut mount 722 846

MacPherson strut mount front R (with a bearing) fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-3.0D 02.94-

View part

HANS PRIES MacPherson strut mount 722 847

MacPherson strut mount front L (with a bearing) fits: CITROEN JUMPER II, JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0-3.0D 12.01-

View part

HANS PRIES MacPherson strut mount 722 850

MacPherson strut mount front L/R fits: CITROEN C5 III PEUGEOT 407, 508 I 1.6-2.2D 03.04-

View part

HANS PRIES MacPherson strut mount 722 851

MacPherson strut mount rear R (with a bearing) fits: PEUGEOT 307 1.4-2.0D 08.00-12.12

View part

HANS PRIES Front ball joint 722 857

Axle ball joint L/R (bottom front) (cone diameter 15,7mm, with extra materials) fits: DS DS 4, DS 5 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.2-Electric 08.00-

View part

HANS PRIES Air blower 722 860

Air blower fits: CITROEN EVASION, JUMPY I FIAT SCUDO, ULYSSE PEUGEOT 806, EXPERT 1.6-2.1D 06.94-12.06

View part

HANS PRIES Spring cushion damper 722 869

Suspension spring fender rear L/R, fits: CITROEN JUMPER III FIAT DUCATO OPEL MOVANO C PEUGEOT BOXER 2.0D-Electric 04.06-

View part

HANS PRIES Spring cushion damper 722 870

Shock absorber bumper rear L/R (height 109mm) fits: CITROEN JUMPER II FIAT DUCATO PEUGEOT BOXER 2.0D-3.0D 04.06-

View part

HANS PRIES Engine mount 722 880

Engine mount front R, top, rubber-metal fits: CITROEN C5 I, C5 II, C5 III, C6, C8, JUMPY II PEUGEOT 407, 508 I, 807, EXPERT, EXPERT TEPEE 1.6-3.0 03.01-

View part

HANS PRIES Engine mount 722 882

Engine mount front R, bottom, hydraulic fits: CITROEN C5 II, C5 III, JUMPY II FIAT SCUDO PEUGEOT 407, 508 I, EXPERT, EXPERT TEPEE 1.6/1.6D/2.0D 05.04-

View part

HANS PRIES Engine mount 722 886

Engine mount front L, top, rubber-metal fits: CITROEN C5 I, C5 II, C5 III PEUGEOT 407, 508 I 1.6D-2.2D 03.01-

View part

HANS PRIES Engine mount 722 887

Engine mount from gearbox side L, top, rubber-metal fits: CITROEN C5 II, C5 III PEUGEOT 407, 508 I 1.6-2.0DH 03.04-

View part

HANS PRIES Engine mount 722 890

Engine mount front R, top, rubber-metal fits: DS DS 4, DS 5 CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4 GRAND PICASSO I, C4 I, C4 II, C4 PICASSO I 1.6D 11.03-

View part

HANS PRIES Engine mount 722 891

Engine mount front R, bottom, hydraulic fits: CITROEN EVASION, JUMPY I, XM FIAT SCUDO LANCIA ZETA PEUGEOT 806, EXPERT 1.6-2.1D 05.89-12.06

View part

HANS PRIES Engine mount 722 899

Engine mount rear L, bottom, rubber-metal fits: CITROEN JUMPER III FIAT DUCATO PEUGEOT BOXER 2.0D/2.2D/2.3D 04.06-

View part

HANS PRIES Engine mount support 722 900

Engine mount support front L/R fits: DS DS 3 CITROEN C3 AIRCROSS II, C3 II, C3 III, C3 PICASSO, C4 CACTUS, C4 II, C4 SPACETOURER, C-ELYSEE, DS3, GRAND C4 SPACETOURER 1.0-1.6D 02.06-

View part

HANS PRIES Transmission mount 722 905

Transmission mount top L (manual) fits: CITROEN C3 I, C3 II, C3 PICASSO, DS3 PEUGEOT 1007, 207 1.4-1.6D 02.02-

View part

HANS PRIES Transmission mount 722 906

Transmission mount top L (manual) fits: DS DS 3 CITROEN C3 I, C3 II, C4 CACTUS, C-ELYSEE, DS3 PEUGEOT 2008 I, 207, 208 I, 301, 308 II 1.0-1.6LPG 02.02-

View part

HANS PRIES Transmission mount 722 907

Transmission mount top L fits: DS DS 3 CITROEN C3 AIRCROSS II, C3 II, C3 III, C3 PICASSO, C4 CACTUS, C4 II, C-ELYSEE, DS3 OPEL CROSSLAND X / CROSSLAND PEUGEOT 2008 I, 207 1.2-1.6LPG 02.06-

View part

HANS PRIES Engine mount 722 910

Engine mount front R, top, hydraulic fits: PEUGEOT 307 2.0D 08.00-04.08

View part

HANS PRIES Front track control arm silent block 722 921

Front track control arm silent block L/R (18x55x48 mm) fits: DS DS 3 CITROEN C3 II, C4 CACTUS, DS3 1.0-1.6D 09.09-

View part

HANS PRIES Stabilizer bar bushing 722 924

Stabilizer bar bushing front inner L/R (20mm) fits: DS DS 3 CITROEN C4 CACTUS, DS3 PEUGEOT 207, 208, 208 I 1.0-1.6D 02.06-

View part

HANS PRIES Stabilizer bar bushing 722 925

Stabilizer bar bushing front inner L/R (21mm) fits: DS DS 3 CITROEN C3 III, DS3 PEUGEOT 207, 208, 208 I 1.0-1.6D 02.06-

View part

HANS PRIES Stabilizer bar bushing 722 926

Stabilizer bar bushing front L/R (23mm) fits: CITROEN C3 PICASSO PEUGEOT 207 1.2-1.6D 02.06-

View part

HANS PRIES Heater hose 722 934 001

Heater hose (19mm)

View part

HANS PRIES Cooling system rubber hose 722 936 001

Cooling system rubber hose (20mm/20mm)

View part

HANS PRIES Stabilizer link 722 939

Stabilizer link front L/R 263mm fits: CITROEN JUMPY II FIAT SCUDO PEUGEOT EXPERT, EXPERT TEPEE TOYOTA PROACE 1.6D/2.0/2.0D 11.06-

View part

HANS PRIES Fuel pump 722 944

Electric fuel pump (module) fits: CITROEN C4 I, C5 I, C5 II PEUGEOT 307 1.4D-2.2D 08.00-11.12

View part

HANS PRIES MacPherson strut bearing 722 946

MacPherson strut bearing front L/R fits: PEUGEOT 406, 605, 607 1.6-3.0 06.89-07.11

View part

HANS PRIES Steering gear boot 722 956

Steering gear boot L/R (length190mm 16mm/61mm) fits: DS DS 4, DS 5 CITROEN BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4 GRAND PICASSO I, C4 II 1.2-Electric 08.00-

View part

HANS PRIES Steering gear boot 722 957

Steering gear boot L/R (length192mm 13mm/53mm) fits: DS DS 3 CITROEN C3 II, DS3 1.0-1.6D 09.09-07.19

View part

HANS PRIES Steering gear boot 722 958 001

Steering gear boot L/R (length196mm 14mm/59,5mm)

View part

HANS PRIES Shock absorber dust cover 722 959

Shock absorber dust cover, front fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, XSARA PICASSO, ZX PEUGEOT 205 I, 205 II, 306, 309 I, 309 II 1.0-2.0D 02.83-12.15

View part

HANS PRIES Shock absorber dust cover 722 960

Shock absorber dust cover, front fits: CITROEN C8, EVASION, JUMPY I, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA PEUGEOT 806, 807, EXPERT, EXPERT TEPEE 1.6-3.0 06.94-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account