Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES ABS sensor 722 100

ABS sensor rear L/R fits: CITROEN C6 PEUGEOT 407 1.6D-3.0D 03.04-

View part

HANS PRIES Clutch disc 722 105

Clutch disc/plate (200mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C2, C3 I, C3 PLURIEL, C4, C4 I, NEMO 1.1-1.6LPG 02.96-

View part

HANS PRIES Expansion tank 722 108

Coolant expansion tank fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE PEUGEOT PARTNER, PARTNER FURGON/NADWOZIE WIELKOPRZESTRZENNE 05.96-12.15

View part

HANS PRIES Clutch cable 722 109

Clutch cable (765mm/332mm) fits: CITROEN EVASION, JUMPY I PEUGEOT 806, EXPERT 1.6-2.1D 06.94-12.06

View part

HANS PRIES Clutch cable 722 111

Clutch cable (653mm/371mm) fits: CITROEN XSARA 1.8/1.8D/1.9D 04.97-08.05

View part

HANS PRIES Clutch cable 722 113

Clutch cable (650mm) fits: CITROEN XSARA 1.4-2.0D 04.97-08.05

View part

HANS PRIES Clutch cable 722 119

Clutch cable (811mm/406mm) fits: PEUGEOT 406 1.6/1.8/2.0 11.95-12.04

View part

HANS PRIES Fuel pump 722 123

Electric fuel pump (cartridge) fits: CITROEN AX PEUGEOT 205 II 1.0-1.6 07.86-12.98

View part

HANS PRIES Clutch release bearing 722 132

Clutch thrust bearing fits: CITROEN C5 I, JUMPER I, JUMPER II, XANTIA, XM PEUGEOT 406, 407, 605, 607, BOXER 2.0-3.0 02.94-

View part

HANS PRIES Steering gear boot 722 136

Steering gear boot L/R (length49mm 11mm/36mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XANTIA, XM, XSARA PICASSO PEUGEOT 405 II, 605, PARTNER 1.1-3.0 05.89-12.15

View part

HANS PRIES Steering gear boot 722 137

Steering gear boot L/R (length200mm 16mm/49mm) fits: PEUGEOT 206, 307 1.1-2.0D 09.98-

View part

HANS PRIES Clutch cable 722 138

Clutch cable fits: CITROEN XANTIA 1.6-3.0 03.93-04.03

View part

HANS PRIES Clutch cable bracket 722 139

Mocowanie linki sprzęgła PEUGEOT 405

View part

HANS PRIES Gear selector element 722 140

Gear selector element fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, EVASION, JUMPY I, XANTIA, XM, XSARA, ZX PEUGEOT 205 II, 306, 405 II, 406, 605, 806, EXPERT 06.87-12.15

View part

HANS PRIES Gear selector element 722 141

Gear selector element fits: CITROEN XANTIA, XM, XSARA, ZX PEUGEOT 306, 405 II, 406, 605 06.92-12.04

View part

HANS PRIES Gear selector element 722 142

Gear selector element fits: CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, SAXO, XSARA, ZX PEUGEOT 106 I, 106 II, 205 II, 306, 405 II, EXPERT, PARTNER 07.86-12.15

View part

HANS PRIES Gear selector element 722 143

Gear selector element fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C3 I, EVASION, JUMPER II, JUMPY I, XSARA, XSARA PICASSO PEUGEOT 206, 308 I 06.96-

View part

HANS PRIES Gear shifter sleeve 722 144

Gearshift control rod sleeve 21/28 fits: CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, SAXO, XSARA, ZX PEUGEOT 106 I, 106 II, 205 II, 206, 206+, 306, 405 II 1.0-2.0D 07.86-

View part

HANS PRIES Gear shifter sleeve 722 145

Gearshift control rod sleeve 16/19 fits: CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, SAXO, XSARA, ZX PEUGEOT 106 I, 106 II, 205 II, 206, 206+, 306, 405 II 1.0-2.0D 07.86-

View part

HANS PRIES Gear shifter sleeve 722 147

Gearshift control rod sleeve fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, EVASION, JUMPY I, XANTIA, XM, XSARA, ZX PEUGEOT 205 II, 306, 405 II, 406 1.0-3.0 06.87-12.15

View part

HANS PRIES Wheel bearing kit 722 151

Wheel bearing kit rear L/R (40x75x27) fits: CITROEN JUMPER I FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-04.02

View part

HANS PRIES Wheel bearing kit 722 152

Wheel bearing kit front L/R (42x82x36) fits: DS DS 3, DS 4 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C3 AIRCROSS II, C3 I, C3 II 1.0-Electric 08.00-

View part

HANS PRIES Wheel bearing kit 722 153

Wheel bearing set with hub front L/R (44x83x44) fits: DS DS 4, DS 5 CITROEN C4 II, C5 III, C6, DS4, DS5 PEUGEOT 3008 I, 308, 308 I, 407, 508, 508 I, 607, RCZ 1.2-3.0D 02.00-

View part

HANS PRIES Release sleeve 722 154

Release sleeve (with clutch shaft oil seal) fits: DS DS 3, DS 3 / DS 3, DS 4, DS 7 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, BX 1.0-3.0D 10.82-

View part

HANS PRIES Engine mount support 722 156

Engine mount support top R fits: CITROEN C5 I, C5 III, C8, EVASION, JUMPY I FIAT SCUDO, ULYSSE LANCIA PHEDRA PEUGEOT 406, 607, 806, 807, EXPERT 1.6D-2.2D 04.98-

View part

HANS PRIES Front track control arm silent block 722 158

Front track control arm silent block L/R (18x50x42 mm) fits: CITROEN C5 I, C5 II 1.6D-3.0 03.01-09.08

View part

HANS PRIES Front track control arm silent block 722 161

Front track control arm silent block L/R (14x40x38 mm) fits: CITROEN C5 I, C5 II 1.6D-3.0 03.01-09.08

View part

HANS PRIES Front track control arm silent block 722 162

Front track control arm silent block L/R (18x50x42 mm) fits: CITROEN C5 I, C5 II 1.6D-3.0 03.01-09.08

View part

HANS PRIES Rear wishbone silent block 722 164

Rear track control arm silent block L/R (bottom rear) fits: PEUGEOT 406 1.6-3.0 11.95-12.04

View part

HANS PRIES Rear suspension beam silent block 722 166

Rear suspension beam silent block (front) L/R fits: CITROEN EVASION, JUMPY I FIAT SCUDO, ULYSSE PEUGEOT 806, EXPERT 1.6-2.1D 06.94-03.16

View part

HANS PRIES Stabilizer bar bushing 722 167

Stabilizer bar bushing front L/R fits: CITROEN C5 I, C5 II 1.6D-3.0 03.01-09.08

View part

HANS PRIES Stabilizer bar bushing 722 168

Stabilizer bar bushing front L/R (21mm) fits: PEUGEOT 406 1.6/1.8/1.9D 11.95-10.04

View part

HANS PRIES Steering gear boot 722 170

Steering gear boot R (length120mm 39mm/39mm) fits: CITROEN SAXO PEUGEOT 106 II 1.0-1.6 02.96-07.04

View part

HANS PRIES Steering gear boot 722 171 001

Steering gear boot L/R (length202mm 24mm/48mm)

View part

HANS PRIES Steering gear boot 722 172 001

Steering gear boot L/R (length170mm 21mm/58mm)

View part

HANS PRIES Steering gear boot 722 173

Steering gear boot L/R (length185mm 16mm/52mm) fits: CITROEN C3 PICASSO, C-ELYSEE PEUGEOT 2008 I, 207, 208 I, 301 1.2-1.6LPG 02.06-

View part

HANS PRIES Steering gear boot 722 174

Steering gear boot L/R (length185mm 14mm/55mm) fits: CITROEN C8, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA PEUGEOT 807, EXPERT, EXPERT TEPEE 1.6D-2.2D 06.02-

View part

HANS PRIES Oil sump gasket 722 178

Oil sump gasket fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C2, C3 I, C3 PLURIEL, XSARA PEUGEOT 206, 307, PARTNER 1.6/1.6ALK/1.6LPG 07.00-

View part

HANS PRIES Crankshaft oil seal 722 179

0326 25 Sealant crankshaft 2.5D/TD PEUGEOT BOXER

View part

HANS PRIES Intake manifold gasket 722 180 001

Suction manifold gasket

View part

HANS PRIES Exhaust manifold gasket 722 182

Exhaust manifold gasket fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BX, C15, C15 FURGON/NADWOZIE WIELKOPRZESTRZENNE, C25, EVASION, JUMPER I, JUMPY I 1.7D-1.9D 10.82-12.06

View part

HANS PRIES Intake manifold gasket 722 183 001

Suction manifold gasket

View part

HANS PRIES Exhaust/intake manifold gasket 722 184 001

Manifold gasket CITROEN JUMPER, XANTIA, ZX PEUGEOT 306, 405 II, 406, BOXER 1.6/1.8/2.0 03.91-

View part

HANS PRIES Exhaust/intake manifold gasket 722 185

Exhaust/intake manifold gasket fits: CITROEN EVASION, JUMPER I, JUMPER II, XANTIA, XSARA, ZX FIAT DUCATO, ULYSSE PEUGEOT 306, 405 II, 406, 806, BOXER, EXPERT 1.6-2.0LPG 03.91-07.06

View part

HANS PRIES Exhaust/intake manifold gasket 722 186 001

Manifold gasket

View part

HANS PRIES Exhaust/intake manifold gasket 722 187 001

View part

HANS PRIES Exhaust/intake manifold gasket 722 188 001

Manifold gasket

View part

HANS PRIES Exhaust/intake manifold gasket 722 189

Exhaust/intake manifold gasket fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, C4 I, C5 I, C5 II, EVASION, JUMPER I, JUMPER II, JUMPY I, XANTIA, XSARA 2.0D/2.2D 06.98-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account