Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Sump drain hole bolt 720 302

Oil sump drain bolt M14x1,25 fits: VOLVO S40 II, V50 CITROEN AX, BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BX, C15 FURGON/NADWOZIE WIELKOPRZESTRZENNE, C25, C4 1.4D-2.2D 10.82-

View part

HANS PRIES Oil sump drain hole bolt gasket/seal 720 303

Sump drain hole bolt seal (14x21x2) fits: VOLVO C30, C70 II, S40 II, S80 II, V50, V70 III AUDI A1, A1 ALLSTREET, A1 CITY CARVER, A3, A4 B7, A4 B8, A5, A6 C6, A6 C7, A6 C8, A7, A8 D3 1.0-6.3 07.87-

View part

HANS PRIES Sump drain hole bolt 720 304

Oil sump drain bolt M10x1,25 fits: DS DS 3, DS 3 / DS 3, DS 4, DS 5 VOLVO C30, S40 II, S60 II, S80 II, V40, V50, V60 I, V70 III CITROEN BERLINGO 1.2-2.2D 06.96-

View part

HANS PRIES Oil sump drain hole bolt gasket/seal 720 305

Sump drain hole bolt seal (10x20x2) fits: DS DS 3, DS 3 / DS 3, DS 4, DS 5, DS 7 VOLVO C30, S40 II, S60 II, S80 II, V40, V50, V60 I, V70 III CITROEN BERLINGO 1.4D-2.2D 06.96-

View part

HANS PRIES Ignition module 720 309

Ignition module (3 pin) fits: CITROEN AX, XM, ZX PEUGEOT 106 I, 205 II, 405 II, 605, PARTNER FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.0-2.0 09.86-12.15

View part

HANS PRIES Ignition module 720 310

Ignition module (7 pin) fits: CITROEN AX, EVASION, XANTIA, XM, ZX PEUGEOT 106 I, 306, 405 II, 406, 605, 806 1.4/1.9/2.0 03.91-10.04

View part

HANS PRIES Engine mount 720 315

Engine mount rear R, bottom, rubber-metal fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4, C4 GRAND PICASSO I, C4 I, C4 PICASSO I 1.4-2.2D 06.98-

View part

HANS PRIES Brake shoe 720 352

4241 J5 Szczęka hamulcowa CITROEN SAXO (96-) (203X38)

View part

HANS PRIES Engine mount 720 361

Engine mount front R, top, rubber-metal fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XANTIA, XSARA, ZX PEUGEOT 306, 405 II, PARTNER 1.1-2.0D 03.91-12.15

View part

HANS PRIES Brake shoe 720 363

4241 L6 Szczęka hamulcowa CITROEN BERLINGO (96-) (229X40)

View part

HANS PRIES Brake shoe 720 364

4241 L0 Szczęka hamulcowa CITROEN C2/C3 1.4 02.02

View part

HANS PRIES Brake shoe 720 369

4241 L7 CITROEN C2 1.4 16V 06.06-, 1.4HDI 09.03- C3 1.6 16V HDI 10.05- PEUGEOT 1007 1.4 16V, 1.4 HDI 10.05-

View part

HANS PRIES Brake shoe 720 372

4241 N1 Szczęka hamulcowa PEUGEOT 206 (98-) (180X32)

View part

HANS PRIES Brake shoe 720 373

4241 N2 Szczęka hamulcowa CITROEN C1 (05-) PEUGEOT 107 1.4HDI 06.05- TOYOTA AYGO 1.4HDI

View part

HANS PRIES Engine mount 720 375

Engine mount front R, top, rubber-metal fits: CITROEN SAXO PEUGEOT 106 I, 106 II 1.4-1.6 08.91-07.04

View part

HANS PRIES Engine mount 720 376

Engine mount front R, bottom, rubber-metal fits: CITROEN SAXO PEUGEOT 106 I, 106 II 1.4-1.6 08.91-07.04

View part

HANS PRIES Engine mount 720 377

Engine mount front L, bottom, rubber-metal fits: DS DS 4, DS 5 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, BERLINGO MULTISPACE, C4 GRAND PICASSO I, C4 I 1.4D-2.0DH 06.96-

View part

HANS PRIES Engine mount 720 378

Engine mount front R, bottom, hydraulic fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, XSARA PICASSO PEUGEOT 206, 206+, 306, PARTNER 1.4D-2.0D 05.93-12.15

View part

HANS PRIES Engine mount 720 379

Engine mount on engine side R, bottom, hydraulic fits: PEUGEOT 406 2.0-2.2D 01.96-12.04

View part

HANS PRIES Engine mount 720 380

Engine mount front R, bottom, hydraulic fits: CITROEN C5 I, C5 II, C5 III, C8, EVASION, JUMPY I, JUMPY II FIAT SCUDO, ULYSSE LANCIA PHEDRA PEUGEOT 407, 607, 806, 807, EXPERT 1.8-2.2D 04.98-

View part

HANS PRIES Engine mount 720 381

Engine mount front/rear L, bottom/top, rubber-metal fits: CITROEN JUMPER I, JUMPER II, JUMPER III FIAT DUCATO PEUGEOT BOXER 1.9D-3.0D 02.94-

View part

HANS PRIES Engine mount 720 382

Engine mount front/rear L, bottom, rubber-metal fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-

View part

HANS PRIES Wheel hub 720 383

Wheel hub front fits: CITROEN AX, SAXO, XSARA, ZX PEUGEOT 106 I, 106 II, 205 II, 306 1.0-1.9D 04.87-08.05

View part

HANS PRIES Wheel bearing kit 720 384

Wheel bearing set with hub front fits: CITROEN AX, SAXO PEUGEOT 106 I, 106 II 1.0-Electric 07.86-07.04

View part

HANS PRIES Wheel hub 720 385

Wheel hub front fits: CITROEN C5 I, C5 II, XANTIA 1.6D-3.0 05.93-09.08

View part

HANS PRIES Wheel hub 720 386

Wheel hub front fits: DS DS 3 CITROEN C2, C3 I, C3 II, C3 III, C3 PLURIEL, C4 CACTUS, C-ELYSEE, DS3, SAXO, XSARA PEUGEOT 1007, 106 II, 2008 I, 206, 206+, 207, 208 I, 301, 306 1.0-1.9D 04.93-

View part

HANS PRIES Wheel bearing kit 720 388

Wheel bearing kit front L/R (37x72x33) fits: DS DS 3 CITROEN C2, C3 I, C3 II, C3 III, C3 PLURIEL, C4 CACTUS, C-ELYSEE, DS3 PEUGEOT 1007, 2008 I, 207, 208, 208 I, 301 1.0-1.6LPG 02.02-

View part

HANS PRIES Stabilizer link 720 389

Stabilizer link front L/R 159mm fits: PEUGEOT 405 I, 405 II 1.4-2.0 01.87-05.97

View part

HANS PRIES Stabilizer link 720 390

Stabilizer link front L/R 360mm fits: PEUGEOT 205 I, 205 II, 309 I, 309 II 1.0-1.9D 02.83-09.98

View part

HANS PRIES Stabilizer link 720 392

Stabilizer link front L/R 122mm fits: CITROEN EVASION, JUMPY I FIAT SCUDO, ULYSSE PEUGEOT 806, EXPERT 1.6-2.1D 06.94-12.06

View part

HANS PRIES Stabilizer link 720 393

Stabilizer link front L/R 134mm fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-

View part

HANS PRIES Stabilizer link 720 394

Stabilizer link front L 330mm fits: DS DS 3 CITROEN C3 AIRCROSS II, C3 III, C3 PICASSO, C4 CACTUS, C-ELYSEE, DS3 PEUGEOT 2008 I, 207, 208, 208 I, 301 1.0-1.6LPG 02.06-

View part

HANS PRIES Stabilizer link 720 395

Stabilizer link front R 330mm fits: DS DS 3 CITROEN C3 AIRCROSS II, C3 III, C3 PICASSO, C4 CACTUS, C-ELYSEE, DS3 PEUGEOT 2008 I, 207, 208, 208 I, 301 1.0-1.6LPG 02.06-

View part

HANS PRIES Stabilizer link 720 396

Stabilizer link front L/R 92mm fits: CITROEN C1, C1 II PEUGEOT 107, 108 TOYOTA AYGO 1.0/1.2/1.4D 06.05-

View part

HANS PRIES Tie rod (with no end) 720 397

Tie rod (with no end) L/R (length: 355mm) fits: PEUGEOT 306 1.1-2.0D 04.93-12.02

View part

HANS PRIES Tie rod (with no end) 720 399

Tie rod (with no end) L/R (length: 204mm) fits: PEUGEOT 405 I, 405 II 1.4-2.0 07.88-04.97

View part

HANS PRIES Tie rod (with no end) 720 403

Tie rod (with no end) L/R (length: 360mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA, XSARA PICASSO, ZX PEUGEOT PARTNER 1.1-Electric 03.91-12.15

View part

HANS PRIES Tie rod (with no end) 720 404

Tie rod (with no end) L/R (length: 301mm) fits: PEUGEOT 406 1.6-3.0 11.95-12.04

View part

HANS PRIES Tie rod (with no end) 720 405

Tie rod (with no end) L/R (length: 300mm) fits: PEUGEOT 206, 206+ 1.1-2.0D 08.98-

View part

HANS PRIES Tie rod (with no end) 720 406

Tie rod (with no end) L/R (length: 336mm) fits: CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE, XSARA PICASSO PEUGEOT PARTNER 1.6-2.0D 12.99-12.15

View part

HANS PRIES Tie rod (with no end) 720 407

Tie rod (with no end) L/R (length: 340mm) fits: CITROEN C4, C4 I PEUGEOT 307, 308 I 1.4-2.0D 08.00-11.14

View part

HANS PRIES Tie rod (with no end) 720 408

Tie rod (with no end) L/R (length: 235mm) fits: CITROEN C2, C2 ENTERPRISE, C3 I, C3 PLURIEL PEUGEOT 1007 1.1-1.6D 02.02-

View part

HANS PRIES Tie rod (with no end) 720 409

Tie rod (with no end) L/R (length: 106mm) fits: CITROEN C5 II, C5 III, C6 PEUGEOT 407 1.6D-3.0D 03.04-

View part

HANS PRIES Tie rod (with no end) 720 410

Tie rod (with no end) L/R (length: 229mm) fits: CITROEN C3 PICASSO PEUGEOT 207 1.2-1.6D 02.06-

View part

HANS PRIES Tie rod (with no end) 720 415

Tie rod (with no end) L/R (length: 334mm) fits: CITROEN JUMPER I, JUMPER II FIAT DUCATO PEUGEOT BOXER 1.9D-2.8D 02.94-

View part

HANS PRIES Tie rod (with no end) 720 417

Tie rod (with no end) L/R (length: 215mm) fits: CITROEN SAXO PEUGEOT 106 II 1.0-1.6 02.96-07.04

View part

HANS PRIES Tie rod end 720 421

Tie rod end L fits: CITROEN C2, C2 ENTERPRISE, C3 I, C3 PLURIEL PEUGEOT 1007 1.1-1.6D 02.02-

View part

HANS PRIES Tie rod end 720 422

Tie rod end R fits: CITROEN C2, C2 ENTERPRISE, C3 I, C3 PLURIEL PEUGEOT 1007 1.1-1.6D 02.02-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account