Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Steering gear boot 700 746

Steering gear boot L/R (length187mm 13mm/51mm) fits: RENAULT LAGUNA II 1.6-3.0 03.01-12.07

View part

HANS PRIES Steering gear boot 700 747 001

Steering gear boot L/R (length186mm 13mm/54,5mm)

View part

HANS PRIES Steering gear boot 700 748

Steering gear boot L/R (length195mm 13mm/53mm) fits: RENAULT GRAND SCENIC II, MEGANE II, SCENIC II 1.4-2.0D 09.02-

View part

HANS PRIES Heater 700 750

Heater fits: RENAULT CLIO II, THALIA I, THALIA II 1.0-3.0 02.98-

View part

HANS PRIES Tie rod end 700 751

Tie rod end L fits: DACIA DUSTER RENAULT DUSTER 1.2-2.0 04.10-

View part

HANS PRIES Tie rod end 700 752

Tie rod end R fits: DACIA DUSTER RENAULT DUSTER 1.2-2.0 04.10-

View part

HANS PRIES Tie rod (with no end) 700 753

Tie rod (with no end) L/R (length: 295mm) fits: DACIA DUSTER RENAULT DUSTER 1.2-2.0 04.10-

View part

HANS PRIES Stabilizer link 700 754

Stabilizer link front L/R 294mm fits: DACIA DUSTER RENAULT ARKANA I, DUSTER, KAPTUR, LATITUDE 1.0-2.0 04.10-

View part

HANS PRIES Steering gear hydraulic pump 700 755

Hydraulic pump, power steering (new) fits: RENAULT MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, SCENIC I 1.8/2.0 01.96-08.03

View part

HANS PRIES Crankshaft sensor 700 756

Crankshaft position sensor fits: DACIA DUSTER, LOGAN, LOGAN MCV, SANDERO NISSAN KUBISTAR RENAULT CLIO II, DUSTER, ESPACE III, FLUENCE, GRAND SCENIC II, KANGOO, KANGOO BE BOP 1.4-2.0 09.95-

View part

HANS PRIES Air cooler hose 700 757

Intercooler hose (with valve) fits: DACIA LOGAN, LOGAN EXPRESS, LOGAN MCV, SANDERO RENAULT CLIO II, CLIO III, KANGOO, KANGOO EXPRESS, LOGAN I, THALIA I, THALIA II 1.5D 06.01-

View part

HANS PRIES Crankshaft sensor 700 758

Crankshaft position sensor fits: DACIA LOGAN, LOGAN EXPRESS, LOGAN II, LOGAN MCV, LOGAN MCV II, SANDERO, SANDERO II NISSAN KUBISTAR RENAULT CLIO II, CLIO III, CLIO IV, KANGOO 1.0-1.6LPG 01.96-

View part

HANS PRIES Shock absorber bumper 700 759

Shock absorber bumper front L/R (height 180mm) fits: RENAULT GRAND SCENIC II, MEGANE II, SCENIC II 1.4-2.0D 09.02-

View part

HANS PRIES MacPherson strut bearing 700 760

MacPherson strut bearing front fits: RENAULT LAGUNA II 1.6-3.0 03.01-12.07

View part

HANS PRIES Stabilizer bar bushing 700 761

Stabilizer bar bushing front inner L/R (20mm) fits: RENAULT KANGOO BE BOP, KANGOO EXPRESS, KANGOO II 1.2-Electric 02.08-

View part

HANS PRIES Stabilizer bar bushing 700 762

Stabilizer bar bushing front inner L/R (20mm) fits: RENAULT MEGANE III 1.2-2.0D 11.08-03.17

View part

HANS PRIES Shock absorber assembly kit 700 763

Shock absorber assembly kit front fits: DACIA DUSTER, LOGAN, LOGAN EXPRESS, LOGAN II, LOGAN MCV, LOGAN MCV II, SANDERO, SANDERO II RENAULT DUSTER, LOGAN EXPRESS, LOGAN I 0.9-2.0 08.04-

View part

HANS PRIES Stabilizer bar bushing 700 764

Stabilizer bar bushing front inner L/R (18mm) fits: DACIA DUSTER RENAULT DUSTER 1.2-2.0 04.10-

View part

HANS PRIES Crankshaft pulley 700 769

Crankshaft pulley (number of ribs: 6) fits: RENAULT CLIO II, KANGOO, KANGOO EXPRESS, LAGUNA I, LAGUNA II, MEGANE I, MEGANE I CLASSIC, MEGANE I COACH, MEGANE SCÉNIC, SCENIC I 1.4-1.6LPG 11.97-

View part

HANS PRIES Shock absorber bumper 700 772

Shock absorber bumper front L/R (height 350mm) fits: RENAULT KANGOO BE BOP, KANGOO EXPRESS, KANGOO II 1.5D-1.6LPG 02.08-

View part

HANS PRIES Upholstery pin 700 774 001

Spinka tapicerska RENAULT

View part

HANS PRIES Wheel bearing kit 700 775

Wheel bearing kit front L/R (42x80x39) fits: DACIA DOKKER, DOKKER FURGON/NADWOZIE WIELKOPRZESTRZENNE, DUSTER, LODGY RENAULT DUSTER, FLUENCE, GRAND SCENIC III, MEGANE 1.0-Electric 11.08-

View part

HANS PRIES Valve cover gasket 700 776

Rocker cover gasket fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415), GLA (X156) 1.2-1.6LPG 06.05-

View part

HANS PRIES Crankshaft sensor 700 780

Crankshaft position sensor fits: DACIA LOGAN, LOGAN MCV, SANDERO RENAULT CLIO II, ESPACE III, FLUENCE, GRAND SCENIC II, KANGOO, KANGOO EXPRESS, KANGOO II, LAGUNA II, LOGAN I 1.4-2.0 01.96-

View part

HANS PRIES Brake master cylinder 700 781

Brake master cylinder (22,2mm) fits: NISSAN KUBISTAR RENAULT KANGOO, KANGOO EXPRESS 1.0-1.9D 08.97-

View part

HANS PRIES Clutch cable 700 784

Clutch cable fits: NISSAN KUBISTAR RENAULT CLIO II, KANGOO, KANGOO EXPRESS, THALIA I 1.0-2.0 09.98-

View part

HANS PRIES Crankshaft pulley 700 788 001

Crankshaft pulley (number of ribs: 6)

View part

HANS PRIES Crankshaft pulley 700 789

Crankshaft pulley (number of ribs: 7) fits: NISSAN PRIMERA RENAULT GRAND SCENIC II, GRAND SCENIC III, LAGUNA II, MEGANE II, MEGANE III, SCENIC II SUZUKI GRAND VITARA II 1.9D 03.01-

View part

HANS PRIES Crankshaft pulley 700 790

Crankshaft pulley (number of ribs: 6) fits: CITROEN C3 I OPEL MOVANO A, VIVARO A PEUGEOT 207 RENAULT LAGUNA I, LAGUNA II, MASTER II, MEGANE II, TRAFIC II 1.4D/1.6/1.9D 09.99-

View part

HANS PRIES Crankshaft pulley 700 791

Crankshaft pulley (number of ribs: 7) fits: NISSAN INTERSTAR, PRIMASTAR OPEL MOVANO A, VIVARO A RENAULT ESPACE IV, MASTER II, TRAFIC II 2.2D/2.5D 12.97-

View part

HANS PRIES Stabilizer bar bushing 700 792

Stabilizer bar bushing front inner L/R (22mm) fits: RENAULT GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 1.2-2.0D 11.08-09.16

View part

HANS PRIES Stabilizer bar bushing 700 794

Stabilizer bar bushing front inner L/R (20mm) fits: NISSAN MICRA III RENAULT CLIO III 1.0-2.0 03.02-12.14

View part

HANS PRIES Wheel suspension track control arm, front 700 796

Front axle track control arm R bottom/transverse front (with a joint (knuckle) with a nut with rubber pad) fits: RENAULT FLUENCE, GRAND SCENIC III, MEGANE, MEGANE III 1.2-Electric 11.08-

View part

HANS PRIES Wheel suspension track control arm, front 700 797

Front axle track control arm L bottom front fits: RENAULT FLUENCE, GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 1.2-Electric 11.08-

View part

HANS PRIES Steering gear boot 700 798

Steering gear boot (length192mm 13,5mm/53mm) fits: DACIA DUSTER RENAULT DUSTER 1.2-2.0 04.10-

View part

HANS PRIES Brake disc 700 802

Brake disc front L/R fits: RENAULT GRAND SCENIC III, LAGUNA, LAGUNA III, MEGANE, MEGANE III, SCENIC III 1.2-2.0D 10.07-09.16

View part

HANS PRIES Radiator mounting 700 812

Radiator mounting fits: RENAULT CLIO II, KANGOO, KANGOO EXPRESS, THALIA I, THALIA II 1.0-2.0 08.97-

View part

HANS PRIES Radiator mounting 700 813

Radiator mounting bottom fits: RENAULT GRAND SCENIC II, MEGANE II, SCENIC II 1.4-2.0D 09.02-

View part

HANS PRIES Choke valve position sensor 700 814

Throttle position sensor fits: DACIA DUSTER, LOGAN, LOGAN MCV, SANDERO FIAT BRAVA, BRAVO I, MAREA, MULTIPLA, PALIO LANCIA LYBRA RENAULT CLIO II, DUSTER, ESPACE III, LAGUNA I 1.4-2.0 09.95-

View part

HANS PRIES Engine mount 700 815

Engine mount rear R, bottom, rubber-metal fits: RENAULT ESPACE IV, LAGUNA II, VEL SATIS 1.6-2.2D 03.01-12.15

View part

HANS PRIES Brake disc 700 817

Brake disc front L/R fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) RENAULT KANGOO BE BOP, KANGOO EXPRESS, KANGOO II 1.2-Electric 02.08-

View part

HANS PRIES Brake disc 700 819

Brake disc with bearing rear L/R fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) NISSAN NV250 RENAULT KANGOO BE BOP 1.2-Electric 02.08-

View part

HANS PRIES Engine mount 700 820

Engine mount front/rear R, top, rubber-metal fits: RENAULT GRAND SCENIC II, KANGOO BE BOP, KANGOO EXPRESS, KANGOO II, MEGANE II, SCENIC II 1.2-2.0D 09.02-

View part

HANS PRIES Cooling system stub-pipe 700 824

Cooling system stub-pipe (number of outputs: 5) fits: DACIA LOGAN, LOGAN EXPRESS, LOGAN MCV, SANDERO RENAULT CLIO II, KANGOO, KANGOO EXPRESS, LOGAN I, THALIA I, THALIA II 1.5D 06.01-

View part

HANS PRIES Wheel bearing kit 700 825

Wheel bearing kit front L/R (45x83x39) fits: RENAULT GRAND SCENIC III, MEGANE, MEGANE III, SCENIC III 1.6D-2.0D 11.08-09.16

View part

HANS PRIES Wheel suspension track control arm, front 700 826

Front axle track control arm L bottom front 20 mm fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) RENAULT KANGOO BE BOP 1.2-Electric 02.08-

View part

HANS PRIES Wheel suspension track control arm, front 700 827

Front axle track control arm R bottom front 20 mm fits: MERCEDES CITAN MIXTO (DOUBLE CABIN), CITAN (W415), CITAN/NADWOZIE WIELKOPRZESTRZENNE (W415) RENAULT KANGOO BE BOP 1.2-Electric 02.08-

View part

HANS PRIES Front track control arm silent block 700 828

Front track control arm silent block L/R (18x55x53 mm) fits: RENAULT LAGUNA, LAGUNA III, LATITUDE 1.5D-3.5 10.07-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account