Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Fuel pump 408 262

Mechanical fuel pump fits: MERCEDES A (W168), C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (C209), E T-MODEL (S210), E (W210), S (W220, V220) 1.7D-3.2D 09.97-05.09

View part

HANS PRIES Crankshaft oil seal 408 264

Crankshaft oil seal in the front (60x75x8) fits: MERCEDES A (W176), B SPORTS TOURER (W246, W242), C (A205), C (C204), C (C205), C T-MODEL (S204), C T-MODEL (S205), C (W204) 1.8D-3.0D 06.06-

View part

HANS PRIES Crankshaft oil seal 408 265

Uszczelniacz wału korbowego tył (96X114X9 ) MERCEDES C (W204), E (W211) 2.2D 08.08-

View part

HANS PRIES Air cooler hose 408 266

Intercooler hose R (intake side, black) fits: MERCEDES SPRINTER 3,5-T (B906), SPRINTER 3-T (B906), SPRINTER 4,6-T (B906), SPRINTER 5-T (B906) 2.1D/2.2D/3.0D 06.06-12.19

View part

HANS PRIES Engine mount 408 269

Engine mount front L/R, hydraulic fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (A207), E (C207), E T-MODEL (S212), E (W212) 1.6-3.5 01.07-

View part

HANS PRIES Propeller shaft support 408 270

Propeller shaft support (25mm, with a bearing) fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203) 2.0 10.00-05.02

View part

HANS PRIES Tie rod (with no end) 408 271

Tie rod (with no end) L/R (length: 254mm) fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HANS PRIES Tie rod end 408 272

Tie rod end L fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212), GLK (X204) 2.0-5.5 06.08-12.17

View part

HANS PRIES Tie rod end 408 273

Tie rod end R fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212), GLK (X204) 2.0-5.5 06.08-12.17

View part

HANS PRIES Engine mount 408 291

Engine mount front L/R, hydraulic fits: MERCEDES E T-MODEL (S210), E (W210) 2.4-5.4 12.96-03.03

View part

HANS PRIES Engine mount 408 292

Engine mount front R, hydraulic fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212) 2.1D/2.2D 01.07-

View part

HANS PRIES Engine mount 408 302

Engine mount front L, hydraulic fits: MERCEDES S (W220, V220) 3.2D 08.99-08.05

View part

HANS PRIES Engine mount 408 304

Engine mount front L/R, hydraulic fits: MERCEDES C (CL203), C T-MODEL (S203), C (W203), CLC (CL203), CLK (A209), CLK (C209), E T-MODEL (S211), E (W211), SL (R230) 1.6-3.7 03.02-01.12

View part

HANS PRIES Flexible brake hoses 408 311

Brake pipe/hose flexible front L/R (length 430mm, M10x1/M10x1) fits: MERCEDES E T-MODEL (S212), E (W212) 1.8-5.5 01.09-12.16

View part

HANS PRIES Flexible brake hoses 408 312

Brake pipe/hose flexible rear L/R (length 377mm, M10x1/M10x1) fits: MERCEDES E T-MODEL (S212), E (W212) 1.8-5.5 01.09-12.16

View part

HANS PRIES Flexible brake hoses 408 313 001

Brake pipe/hose flexible front L/R (length 488mm, M10x1/M10x1)

View part

HANS PRIES Engine mount 408 323

Engine mount front L, hydraulic fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212) 2.1D/2.2D 01.07-

View part

HANS PRIES Brake disc 408 325

Brake disc front L/R fits: MERCEDES GL (X164), M (W164), R (W251, V251) MITSUBISHI LANCER VII 2.0-5.5 04.03-12.14

View part

HANS PRIES Handbrake cable 408 327

Handbrake cable front L/R (1307mm) fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-2.0D 09.04-06.12

View part

HANS PRIES Handbrake cable 408 328

Handbrake cable rear L (587mm/476mm) fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

HANS PRIES Handbrake cable 408 329

Handbrake cable rear R (1215mm/1065mm) fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

HANS PRIES Air blower 408 330

Air blower fits: MERCEDES C T-MODEL (S204), C (W204), E (A207), E (C207), E T-MODEL (S212), E (W212), GLK (X204), SLS AMG (C197), SLS AMG (R197) 1.6-6.3 01.07-

View part

HANS PRIES Cooling system rubber hose 408 333

Cooling system rubber hose top L (37mm/34mm) fits: MERCEDES SPRINTER 3,5-T (B906), SPRINTER 3-T (B906), SPRINTER 4,6-T (B906), SPRINTER 5-T (B906) 1.8-3.5 06.06-12.19

View part

HANS PRIES Cooling system rubber hose 408 334

Cooling system rubber hose bottom R fits: MERCEDES SPRINTER 3,5-T (B906), SPRINTER 3-T (B906), SPRINTER 4,6-T (B906), SPRINTER 5-T (B906) 1.8-3.5 06.06-12.19

View part

HANS PRIES Steering gear hydraulic pump 408 335

Hydraulic pump, power steering (new) fits: MERCEDES E T-MODEL (S211), E (W211) 2.6/3.2/5.0 03.02-07.09

View part

HANS PRIES Crankshaft oil seal 408 343 001

Crankshaft oil seal front/outside (88x105x10)

View part

HANS PRIES Oil radiator seal 408 344

Oil radiator seal fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (A209), CLK (C208), CLK (C209), CLS (C219), E T-MODEL (S210) 2.4-5.5 12.96-

View part

HANS PRIES Oil radiator seal 408 345

Oil radiator seal fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (A209), CLK (C208), CLK (C209), E T-MODEL (S210), E T-MODEL (S211) 2.4-5.0 12.96-

View part

HANS PRIES Oil radiator seal 408 346

Oil radiator seal fits: MERCEDES C (CL203), C T-MODEL (S203), C T-MODEL (S204), C (W203), C (W204), CLK (C209), E T-MODEL (S210), E T-MODEL (S211), E (W210), E (W211), M (W163) 2.1D-3.2D 03.99-

View part

HANS PRIES Wheel suspension track control arm, front 408 350

Front axle track control arm L top front fits: MERCEDES S (C216), S (W221, V221) 2.2D-6.3 10.05-12.13

View part

HANS PRIES Wheel suspension track control arm, front 408 351

Front axle track control arm R top front fits: MERCEDES S (C216), S (W221, V221) 2.2D-6.3 10.05-12.13

View part

HANS PRIES Wheel bearing kit 408 352

Wheel bearing kit front/rear L/R (54x90x50) fits: MERCEDES GL (X164), M (W164), R (W251, V251) 3.0-6.2 02.05-12.14

View part

HANS PRIES Valve cover gasket 408 355

Rocker cover gasket fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212), GLE (W166) 2.2D/2.2DH/3.0D 06.06-

View part

HANS PRIES Wheel suspension track control arm, front 408 356

Front axle track control arm L bottom front fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HANS PRIES Wheel suspension track control arm, front 408 357

Front axle track control arm R bottom front fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HANS PRIES MacPherson strut mount 408 361

MacPherson strut mount front L/R fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.17

View part

HANS PRIES Stabilizer link 408 366

Stabilizer link front L 324mm fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.17

View part

HANS PRIES Stabilizer link 408 367

Stabilizer link front R 325mm fits: MERCEDES CLS (C218), CLS SHOOTING BRAKE (X218), E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.17

View part

HANS PRIES Front track control arm silent block 408 368

Front track control arm silent block in the front L/R (13x75x65 mm) fits: MERCEDES E T-MODEL (S212), E (W212) 1.6-6.2 01.09-12.16

View part

HANS PRIES Tie rod end 408 371

Tie rod end L fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (C207) 2.2D-3.5 07.07-

View part

HANS PRIES Tie rod end 408 372

Tie rod end R fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (C207) 2.2D-3.5 07.07-

View part

HANS PRIES Multi V-belt pulley 408 373

Multi V-belt pulley (gfk) fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), CLS (C218), CLS SHOOTING BRAKE (X218), E (A207), E (C207), E T-MODEL (S212), E (W212), GLE (W166) 2.2D/2.2DH 08.08-

View part

HANS PRIES Wheel suspension track control arm, front 408 378

Front axle track control arm L bottom front fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (C207) 1.6-6.3 01.07-

View part

HANS PRIES Wheel suspension track control arm, front 408 379

Front axle track control arm R bottom front fits: MERCEDES C (C204), C T-MODEL (S204), C (W204), E (C207) 2.2D-3.5 07.07-

View part

HANS PRIES Wheel suspension track control arm, front 408 384

Front axle track control arm L bottom front fits: MERCEDES GL (X164), M (W164) 3.0-6.3 02.05-12.12

View part

HANS PRIES Wheel suspension track control arm, front 408 385

Front axle track control arm R bottom front fits: MERCEDES GL (X164), M (W164) 3.0-6.3 02.05-12.12

View part

HANS PRIES Wheel suspension track control arm, front 408 386

Front axle track control arm L top front 14,9 mm fits: MERCEDES GL (X164), M (W164), R (W251, V251) 3.0-6.3 02.05-12.14

View part

HANS PRIES Wheel suspension track control arm, front 408 387

Front axle track control arm R top front 14,9 mm fits: MERCEDES GL (X164), M (W164), R (W251, V251) 3.0-6.3 02.05-12.14

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account