Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Steering gear hydraulic pump 401 310

Hydraulic pump, power steering (new) fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904), VITO (W638) 2.3D/2.9D 01.95-05.06

View part

HANS PRIES Steering centre link 401 318

Steering centre link (490mm) fits: MERCEDES 190 (W201) 1.8-2.6 10.82-08.93

View part

HANS PRIES Steering centre link 401 321

Steering centre link L (526mm) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), E (A124), E (C124), E T-MODEL (S124), E (W124) 2.0-3.6 01.85-03.98

View part

HANS PRIES Steering centre link 401 323

Steering centre link L fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124) 2.0-3.0D 01.85-06.93

View part

HANS PRIES Tie rod (with no end) 401 324

Tie rod (with no end) L/R (length: 258mm) fits: MERCEDES E T-MODEL (S210), E (VF210), E (W210) 2.0-5.4 06.95-03.03

View part

HANS PRIES MacPherson strut bearing 401 326

MacPherson strut bearing front L/R fits: MERCEDES V (638/2), VITO (W638) 2.0-2.8 02.96-07.03

View part

HANS PRIES Rear suspension beam silent block 401 327

Rear suspension beam silent block (Inner in the back) L/R

View part

HANS PRIES Leaf spring silent block 401 330

Silentblock/spring bush rear L/R fits: MERCEDES SPRINTER 2-T (B901, B902), SPRINTER 3-T (B903), SPRINTER 4-T (B904) VW LT 28-35 II 2.1D-2.9D 01.95-05.06

View part

HANS PRIES Air flowmeter 401 331

Air flowmeter (5 pin, module) fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (A209), CLK (C208), CLK (C209), E T-MODEL (S210) 2.4-3.7 12.96-

View part

HANS PRIES Air flowmeter 401 333

Air flowmeter (4 pin, module) fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E (A124), E (C124) 2.0/2.2/2.3 10.92-03.01

View part

HANS PRIES Air flowmeter 401 334

Air flowmeter (5 pin, module) fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E (W210), M (W163), SLK (R170), SPRINTER 2-T (B901, B902) 1.8-2.5D 03.93-05.06

View part

HANS PRIES Air flowmeter 401 336

Air flowmeter (4 pin, module) fits: MERCEDES 124 (C124), 124 T-MODEL (S124), 124 (W124), E (C124), E T-MODEL (S124), E (W124), E (W210), S (W140), SL (R129) 2.8/3.2/3.6 03.91-10.01

View part

HANS PRIES Fuel pump elements 401 340

View part

HANS PRIES Wheel hub 401 341

Wheel hub front fits: MERCEDES A (W168), VANEO (414) 1.4-2.1 07.97-07.05

View part

HANS PRIES Wheel hub 401 342

Wheel hub rear fits: MERCEDES A (W168) 1.4-1.9 07.97-08.04

View part

HANS PRIES Wheel hub 401 344

Wheel hub front fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E (W210), SLK (R170) 1.8-5.0 03.93-04.04

View part

HANS PRIES Wheel hub 401 345

Wheel hub rear fits: MERCEDES C (C204), CLK (C209), CLS (C218), CLS (C219), CLS SHOOTING BRAKE (X218), E T-MODEL (S211), E T-MODEL (S212), E (VF211), E (W211), E (W212), GLK (X204) 1.8-6.3 03.02-

View part

HANS PRIES Stabilizer link 401 346

Stabilizer link rear L/R 150mm fits: MERCEDES GL (X164), GL (X166), GLE (C292), GLE (W166), GLS (X166), M (W164), M (W166), R (W251, V251) 2.2D-6.2 02.05-10.19

View part

HANS PRIES Stabilizer link 401 347

Stabilizer link front L/R 195mm fits: MERCEDES GL (X164), M (W164), R (W251, V251) 3.0-6.2 02.05-12.14

View part

HANS PRIES Stabilizer link 401 348

Stabilizer link rear L/R 87mm fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-2.0D 09.04-06.12

View part

HANS PRIES Stabilizer link 401 349

Stabilizer link front L/R 280mm/244mm fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

HANS PRIES Stabilizer link 401 351

Stabilizer link front L 190mm fits: MERCEDES M (W163) 2.3-4.3 02.98-06.05

View part

HANS PRIES Stabilizer link 401 352

Stabilizer link front R 190mm fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Wheel suspension track control arm, front 401 353

Front axle track control arm L bottom front fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

HANS PRIES Wheel suspension track control arm, front 401 354

Front axle track control arm R bottom front fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

HANS PRIES Wheel suspension track control arm, front 401 355

Front axle track control arm L top front fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Wheel suspension track control arm, front 401 356

Front axle track control arm R top front fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Wheel suspension track control arm, rear 401 357

Rear axle track control arm L (top, rear, transverse) fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Wheel suspension track control arm, rear 401 358

Rear axle track control arm R (top, rear, transverse) fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Front ball joint 401 359

Axle ball joint L/R (bottom front) (cone diameter 16,5mm) fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Front ball joint 401 360

Axle ball joint L/R (bottom front) (cone diameter 15,4mm, with extra materials) fits: MERCEDES A (W169), B SPORTS TOURER (W245) 1.5-Electric 09.04-06.12

View part

HANS PRIES Ball joint, rear 401 361

Ball joint, rear L/R (bottom rear) fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Tie rod end 401 362

Tie rod end L fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Tie rod end 401 363

Tie rod end R fits: MERCEDES M (W163) 2.3-5.4 02.98-06.05

View part

HANS PRIES Tie rod end 401 364

Tie rod end L fits: MERCEDES CLS (C219), E T-MODEL (S211), E (VF211), E (W211) 1.8-6.3 03.02-12.10

View part

HANS PRIES Tie rod end 401 365

Tie rod end R fits: MERCEDES 124 (W124), CLS (C219), E T-MODEL (S211), E (VF211), E (W211) 1.8-6.3 12.85-12.10

View part

HANS PRIES Tie rod end 401 366

Tie rod end L fits: MERCEDES E T-MODEL (S210), E (W210) 2.8/3.2/4.3 12.96-03.03

View part

HANS PRIES Tie rod end 401 367

Tie rod end R fits: MERCEDES E T-MODEL (S210), E (W210) 2.8/3.2/4.3 12.96-03.03

View part

HANS PRIES Steering centre link 401 368

Steering centre link (1336mm) fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208) 2.4-4.3 06.97-06.02

View part

HANS PRIES Tie rod (with no end) 401 369

Tie rod (with no end) L/R (length: 340mm) fits: MERCEDES V (638/2), VITO (W638) 2.0-2.8 02.96-07.03

View part

HANS PRIES Wheel bearing kit 401 370

Wheel bearing set with hub front L/R (39x68x20) fits: MERCEDES CLS (C218), CLS (C219), CLS SHOOTING BRAKE (X218), E T-MODEL (S211), E T-MODEL (S212), E (W211), E (W212) 1.8-6.2 10.01-12.17

View part

HANS PRIES Wheel bearing kit 401 373

203 330 00 51 Front Wheel Bearing Mercedes-Benz C-Class (W203, W204, S203, S204, CL203) '00->, CLK-Class (C209, A209) '02->, CLC-Class '08-> SLK-Class (R171) '04->

View part

HANS PRIES Wheel bearing kit 401 374

Wheel bearing kit rear fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), S (C126), S (W126) M102.920-OM617.952 01.76-06.91

View part

HANS PRIES Wheel bearing kit 401 375

Wheel bearing kit rear L/R (25x55x43) fits: MERCEDES A (W168) 1.4-1.9 07.97-08.04

View part

HANS PRIES Wheel bearing kit 401 376

Wheel bearing kit front L/R (42x75x37) fits: MERCEDES A (W168), VANEO (414) 1.4-2.1 07.97-07.05

View part

HANS PRIES Wheel bearing kit 401 377

Wheel bearing set with hub rear L/R (with hub) (49x91x50) fits: MERCEDES E T-MODEL (S211), E T-MODEL (S212), E (W211), E (W212), GLK (X204), S (W221, V221) 1.8-5.5 03.02-12.16

View part

HANS PRIES Wheel bearing kit 401 378

Wheel bearing kit front/rear L/R (45x84x39) fits: MERCEDES V (638/2), VITO (W638) 2.0-2.8 02.96-07.03

View part

HANS PRIES Fuel filter 401 379

Fuel filter fits: MERCEDES 124 T-MODEL (S124), 124 (W124), 190 (W201), C T-MODEL (S202), C (W202), E T-MODEL (S124), E T-MODEL (S210), E (W124), E (W210), S (W140) 2.0D-3.4D 09.86-05.06

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account