Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Front ball joint 400 287

Axle ball joint L/R (bottom front) (cone diameter 18,2mm) fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), S (C126), S (W116), S (W126) 2.0-6.8 08.72-06.91

View part

HANS PRIES Front ball joint 400 289

Axle ball joint L/R (bottom/outer front) (cone diameter 16mm, with a nut) fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E T-MODEL (S210), E T-MODEL (S211) 1.8-5.5 03.93-07.09

View part

HANS PRIES Reaction bar 400 290

2103503806 rod rear suspension (bottom front) DB W124/201

View part

HANS PRIES Wheel suspension track control arm, rear 400 291

Rear axle track control arm L/R (top, rear, transverse, with rubber pad) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), C (CL203) 1.8-6.0 10.82-02.11

View part

HANS PRIES Wheel suspension track control arm, rear 400 292

Rear axle track control arm L/R (top, rear, transverse) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), C (CL203), C T-MODEL (S202) 1.6-6.2 10.82-06.11

View part

HANS PRIES Wheel suspension track control arm, rear 400 293

Rear axle track control arm L/R (top, rear, transverse) fits: MERCEDES S (C140), S (W140) 2.8-6.0 02.91-12.99

View part

HANS PRIES Wheel suspension track control arm, rear 400 294

Rear axle track control arm L/R (top, rear, transverse) fits: MERCEDES S (C140), S (W140) 2.8-5.0 02.91-12.99

View part

HANS PRIES Wheel suspension track control arm, rear 400 295

Rear axle track control arm L/R (bottom, rear, transverse) fits: MERCEDES S (C140), S (C215), S (W140), S (W220, V220) 2.8-6.0 02.91-03.06

View part

HANS PRIES Wheel suspension track control arm, rear 400 296

Rear axle track control arm L/R (bottom, rear, transverse) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), C T-MODEL (S202), C (W202) 1.8-6.0 10.82-04.04

View part

HANS PRIES multi-V belt spring - vibration damper 400 300

V-belt vibration damper fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), C T-MODEL (S202), C (W202), E (C124), E T-MODEL (S124) 2.0D-3.6 08.83-05.06

View part

HANS PRIES Multi-V-belt tensioner bearing 400 302

Multi-ribbed belt tensioner bearing fits: MERCEDES 124 T-MODEL (S124) 200 D (124.120)/200 T D (124.180)/208 D 2.3 (601.362)/210 D 2.8 (601.466)/250 D (124.125)/250 T D (124.185)/250 TD Turbo (124.188)

View part

HANS PRIES Multi-V belt tensioner 400 303

Multi-V belt tensioner fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C T-MODEL (S204), C (W202), C (W203), C (W204), CLC (CL203), CLK (C209), E T-MODEL (S210) 2.1D-3.2D 09.97-

View part

HANS PRIES Sump drain hole bolt 400 304

Oil sump drain bolt M14x1,5 fits: SSANGYONG REXTON / REXTON II 2.7D 08.04-

View part

HANS PRIES Sump drain hole bolt 400 305 001

Oil sump drain bolt M12x1,5

View part

HANS PRIES Oil drain plug gasket 400 307

N007603012110 Gasket oil pan bolts MERCEDES

View part

HANS PRIES Control arm repair kit 400 330

Control arm repair kit front (track control arm type: transverse) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (A124), E (C124) 1.8-6.0 01.85-10.01

View part

HANS PRIES Control arm repair kit 400 333

Control arm repair kit front L/R fits: MERCEDES C T-MODEL (S202), C (W202), SLK (R170) 1.8-3.2 03.93-04.04

View part

HANS PRIES Control arm repair kit 400 334

Control arm repair kit front (track control arm type: transverse) fits: MERCEDES E T-MODEL (S210), E (W210) 2.0-4.3 06.95-03.03

View part

HANS PRIES Front track control arm silent block 400 336

Front track control arm silent block L/R (13x60x26 mm) fits: MERCEDES A (W168), A (W169), B SPORTS TOURER (W245) 1.4-2.1 07.97-06.12

View part

HANS PRIES Front track control arm silent block 400 343

Front track control arm silent block L/R (20x50x26 mm) fits: MERCEDES E T-MODEL (S210), E (VF210), E (W210) 2.0-5.5 06.95-03.03

View part

HANS PRIES Wheel hub 400 358

Wheel hub rear fits: MERCEDES E (W210) 2.0-5.0 06.95-03.02

View part

HANS PRIES Wheel hub 400 359

Wheel hub rear fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (A209), CLK (C208), CLK (C209), SLK (R170), SLK (R171) 1.8-5.0 03.93-02.11

View part

HANS PRIES Ignition switch insert 400 360

Ignition lock cylinder fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), S (C126), S (W126) 2.0-5.5 02.76-06.91

View part

HANS PRIES Ignition switch insert 400 361

Ignition lock cylinder fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (A124), E (C124), E T-MODEL (S124), E (W124), S (C126), S (W126) 1.8-5.5 12.79-03.98

View part

HANS PRIES Shock absorber bumper 400 362

Shock absorber bumper front L/R (height 75mm) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (A124), E (C124), E T-MODEL (S124), E (W124) 1.8-5.0 10.82-10.01

View part

HANS PRIES Shock absorber bumper 400 363

Shock absorber bumper front L/R (height 83mm) fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E (A124), E (C124), E T-MODEL (S124), E (W124) 2.0-4.2 08.83-03.98

View part

HANS PRIES Flexible brake hoses 400 423

Brake pipe/hose flexible front L/R (length 385mm, M10x1/M10x1) fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C T-MODEL (S204), C (W202), C (W203), C (W204), CLK (A208) 1.6-5.5 03.93-

View part

HANS PRIES Flexible brake hoses 400 425

Brake pipe/hose flexible front L/R (length 280mm, M10x1/M10x1) fits: MERCEDES A (W168), E T-MODEL (S210), E (W210) 1.4-4.3 12.96-08.04

View part

HANS PRIES Flexible brake hoses 400 426

Brake pipe/hose flexible rear L/R (length 280mm, M10x1/M10x1) fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (A209), CLK (C208) 1.8-6.0 02.91-02.11

View part

HANS PRIES Frost plug 400 431

Frost plug, outer diameter: 25 mm fits: DS DS 3, DS 3 / DS 3, DS 4, DS 5, DS 7 MERCEDES SPRINTER 3-T (B906) AUDI A1, A3, A3 ALLSTREET, CABRIOLET B3, Q3, TT CHEVROLET MALIBU 1.0-3.0 06.91-

View part

HANS PRIES Air filter brackets 400 433

Air filter mounting M6 1 fits: MERCEDES 123 T-MODEL (S123) 2.9D 10.80-11.85

View part

HANS PRIES Air filter brackets 400 434

Air filter mounting M6 1 fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), S (C126), S (W126), SLK (R170) 2.0-5.5 01.76-03.00

View part

HANS PRIES Air filter brackets 400 435

Air filter mounting M6 1 fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), E T-MODEL (S124), E (W124), S (C126) 1.8-5.5 02.76-10.98

View part

HANS PRIES Fuel filler cap 400 436

Fuel filler cap fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), /8 (W114), /8 (W115), C T-MODEL (S202) 01.68-12.07

View part

HANS PRIES Stabilizer bar bushing 400 439

Stabilizer bar bushing front inner L/R (24mm) fits: MERCEDES 124 (C124), 124 (W124), C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E (C124), E (W124), SLK (R170) 1.8-2.3 01.85-06.02

View part

HANS PRIES Stabilizer bar bushing 400 441

Stabilizer bar bushing front outer L/R (22,5mm) fits: MERCEDES 124 T-MODEL (S124), 124 (W124), 190 (W201), E T-MODEL (S124), E (W124) 2.0-4.2 04.85-06.96

View part

HANS PRIES Stabilizer bar bushing 400 442

Stabilizer bar bushing front outer L/R (18,5mm) fits: MERCEDES 124 (C124), 124 (W124), 190 (W201), C T-MODEL (S202), C (W202), CLK (A208), CLK (C208), E (C124), E T-MODEL (S210) 1.8-6.0 12.84-04.04

View part

HANS PRIES Stabilizer bar bushing 400 443

Stabilizer bar bushing front inner L/R fits: MERCEDES C T-MODEL (S202), C (W202), CLK (A208), CLK (C208) 1.8-3.2 03.93-06.02

View part

HANS PRIES Stabilizer bar bushing 400 444

Stabilizer bar bushing front inner L/R (14mm) fits: MERCEDES 190 (W201), C T-MODEL (S202), C (W202), CLK (C208), E (W210), SL (R129) 1.8-6.0 09.86-06.02

View part

HANS PRIES Gearbox hydraulic filter 400 451

Gearbox hydraulic filter fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C T-MODEL (S204), C (W202), C (W203), C (W204), CLC (CL203), CLK (A208), CLK (A209), CLK (C208) 1.6-6.0 02.91-

View part

HANS PRIES Gearbox hydraulic filter 400 453

Gearbox hydraulic filter fits: MERCEDES 123 (C123), 123 T-MODEL (S123), 123 (W123), 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), 190 (W201), C (W202), E (A124) 1.8-6.0 02.76-10.01

View part

HANS PRIES Gearbox hydraulic filter 400 454

Gearbox hydraulic filter fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), E (C124), E T-MODEL (S124), E (W124), E (W210), S (C126), S (C140), S (W126) 2.0-6.0 09.80-10.01

View part

HANS PRIES Automatic transmission gasket/seal 400 457

Automatic transmission gasket/seal fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C T-MODEL (S204), C (W202), C (W203), C (W204), CLC (CL203), CLK (A208), CLK (A209) 1.6-6.1 02.91-

View part

HANS PRIES Transmission mount 400 468

Transmission mount rear L/R (automatic) fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (A209), CLK (C208), CLK (C209) 1.8-6.0 02.91-01.12

View part

HANS PRIES Engine mount 400 471

Engine mount front R, hydraulic fits: MERCEDES C (CL203), C T-MODEL (S202), C T-MODEL (S203), C (W202), C (W203), CLK (A208), CLK (C208), E T-MODEL (S210), E (W210), E (W211) 2.0-5.4 05.93-12.08

View part

HANS PRIES Wiper motor 400 472

Wiper motor front fits: MERCEDES 124 (A124), 124 (C124), 124 T-MODEL (S124), 124 (W124), E (A124), E (C124), E T-MODEL (S124), E (W124) 12.84-03.98

View part

HANS PRIES Engine mount 400 476

Engine mount front L, hydraulic fits: MERCEDES CLK (C208), E T-MODEL (S210), E (W210) 2.0/2.3 06.95-08.00

View part

HANS PRIES Engine mount 400 477

Engine mount front R, hydraulic fits: MERCEDES C (W203), CLK (C208), E T-MODEL (S210), E (W210) 1.8-3.2 06.95-02.07

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account