Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Engine mount 208 469

Engine mount front L, rubber-metal fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 2.0D 07.08-03.17

View part

HANS PRIES Multi V-belt pulley 208 477

Multi V-belt pulley fits: CHEVROLET CAPTIVA, MALIBU OPEL ANTARA A, ASTRA J GTC, INSIGNIA A, INSIGNIA A COUNTRY SAAB 9-5 2.0/2.0ALK/2.4 07.08-

View part

HANS PRIES Multi-V belt tensioner 208 478

Multi-V belt tensioner fits: CHEVROLET CAPTIVA, MALIBU OPEL ANTARA A, ASTRA J GTC, INSIGNIA A, INSIGNIA A COUNTRY 2.0/2.0ALK/2.4 07.08-

View part

HANS PRIES EGR valve 208 482

EGR valve fits: ALFA ROMEO MITO CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500, 500 C, 500L, DOBLO, DOBLO CARGO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.3D/1.4CNG 10.05-

View part

HANS PRIES Air blower 208 483

Air blower fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT DOBLO, DOBLO CARGO, FIORINO, FIORINO FURGON/NADWOZIE WIELKOPRZESTRZENNE, GRANDE PUNTO, LINEA, PUNTO 0.9-2.0D 06.05-

View part

HANS PRIES Engine mount 208 486

Engine mount from gearbox side L, top, hydraulic fits: CHEVROLET CRUZE OPEL ASTRA J, ASTRA J GTC 1.4 12.09-

View part

HANS PRIES ABS sensor 208 490

ABS sensor rear L/R fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 1.4-2.0D 07.08-03.17

View part

HANS PRIES ABS sensor 208 491

ABS sensor front L/R fits: CHEVROLET MALIBU OPEL INSIGNIA A, INSIGNIA A COUNTRY 1.4-2.8 07.08-

View part

HANS PRIES Pneumatic clutch bearing 208 498

Hydraulic concentric bearing fits: OPEL ASTRA H, ASTRA H GTC, CORSA D, MERIVA A, ZAFIRA B 1.7D 09.03-04.15

View part

HANS PRIES ABS sensor 208 500

ABS sensor front L/R fits: CHEVROLET CRUZE, ORLANDO, VOLT OPEL AMPERA, ASTRA J, ASTRA J GTC, MERIVA B, ZAFIRA C 1.3D-2.0D 05.09-

View part

HANS PRIES ABS sensor 208 501

ABS sensor rear L/R fits: CHEVROLET CRUZE, VOLT OPEL AMPERA, ASTRA J, ASTRA J GTC, CASCADA 1.3D-2.0D 05.09-

View part

HANS PRIES Tie rod (with no end) 208 505

Tie rod (with no end) L/R (length: 312mm) fits: CHEVROLET CRUZE OPEL ASTRA J 1.3D-2.0D 05.09-

View part

HANS PRIES Intake manifold pressure sensor 208 511

Intake manifold pressure sensor (3 pin) fits: OPEL ASTRA H, ASTRA H GTC, ZAFIRA B 1.6/1.8 07.05-04.15

View part

HANS PRIES Front suspension beam silent block 208 512

Front suspension beam silent block (front/in the back/middle) L/R fits: OPEL ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, ZAFIRA A, ZAFIRA B 1.2-2.2D 02.98-04.15

View part

HANS PRIES Engine mount 208 514

Engine mount front R, top, hydraulic fits: OPEL ASTRA J, ASTRA J GTC, CASCADA, ZAFIRA C 2.0D 09.09-11.18

View part

HANS PRIES Engine mount 208 515

Engine mount from gearbox side L, inner, hydraulic fits: OPEL ASTRA J, ASTRA J GTC, CASCADA, ZAFIRA C 1.6/1.6D 12.09-04.19

View part

HANS PRIES Engine mount 208 517

Engine mount front/rear L, rubber-metal fits: CHEVROLET CRUZE OPEL ASTRA J, ASTRA J GTC 1.7D 09.09-

View part

HANS PRIES Cooling system thermostat 208 521

Cooling system thermostat (105°C, in housing) fits: CHEVROLET AVEO, CRUZE, ORLANDO, TRAX OPEL ASTRA H, ASTRA J, ASTRA J GTC, INSIGNIA A, MERIVA A, MOKKA / MOKKA X, ZAFIRA B 1.6-1.8LPG 03.04-

View part

HANS PRIES Sump drain hole bolt 208 522

Oil sump drain bolt M12x1,75 fits: CADILLAC ESCALADE CHEVROLET CAMARO, CAPTIVA, CORVETTE, CRUZE, SILVERADO 1500, TRAILBLAZER FORD FOCUS III, FOCUS IV, KUGA II, MONDEO V 1.0-6.2 01.97-

View part

HANS PRIES Timing belt support roller/pulley 208 523

Timing belt support roller/pulley fits: CHEVROLET CRUZE, TRAX HONDA CIVIC VII ISUZU GEMINI MAZDA 323 S V OPEL ASTRA F, ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC 1.5D/1.7D 06.87-

View part

HANS PRIES Oil sump 208 528

Oil sump (steel) fits: OPEL MOVANO A, VIVARO A RENAULT ESPACE III, ESPACE IV, LAGUNA I, LAGUNA II, MASTER II, TRAFIC II 2.2D/2.5D 11.93-

View part

HANS PRIES Timing chain tensioner 208 530

Timing chain tensioner fits: CHEVROLET AVEO, CRUZE, ORLANDO, TRAX, VOLT OPEL ADAM, AMPERA, ASTRA H, ASTRA H GTC, ASTRA J, ASTRA J GTC, CASCADA 1.0-1.4LPG 06.03-

View part

HANS PRIES Timing chain tensioner 208 533

Timing chain tensioner fits: ALFA ROMEO 159, SPIDER CHEVROLET CAPTIVA FIAT CROMA OPEL ASTRA G, INSIGNIA A COUNTRY, SIGNUM, VECTRA B, VECTRA C, VECTRA C GTS, ZAFIRA B 1.9-2.4 06.00-

View part

HANS PRIES Transmission mount 208 534

Transmission mount rear L (manual) fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D 02.10-12.24

View part

HANS PRIES MacPherson strut mount 208 536

MacPherson strut mount front L/R fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D/Electric 02.10-

View part

HANS PRIES Engine mount 208 538

Engine mount rear L, bottom/top, rubber-metal fits: OPEL AGILA A, AGILA B, ASTRA G, COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, CORSA D, MERIVA A, TIGRA 1.3D-1.8 09.01-

View part

HANS PRIES Axle rubber boot set 208 541

Joint rubber boot front/outside (fi: 22/73) (length115) fits: ALFA ROMEO MITO FIAT GRANDE PUNTO, PUNTO, PUNTO EVO OPEL ADAM, CORSA C, CORSA D 1.0-1.4LPG 06.05-

View part

HANS PRIES Axle rubber boot set 208 542

Joint rubber boot front/outside (fi: 20/64) (length94) fits: OPEL ADAM, CORSA D 1.0-1.4LPG 07.06-05.19

View part

HANS PRIES Axle rubber boot set 208 543 001

Joint rubber boot front/outside (fi: 24/80) (length125) (set)

View part

HANS PRIES Axle rubber boot set 208 544

Joint rubber boot front/outside (fi: 25/83) (length120) fits: OPEL ASTRA J, INSIGNIA A, MERIVA B 1.4-1.8 07.08-06.18

View part

HANS PRIES ABS sensor 208 548

ABS sensor rear L/R fits: NISSAN PRIMASTAR OPEL VIVARO A RENAULT TRAFIC II 1.9D-2.5D 02.01-

View part

HANS PRIES Oil dipstick 208 549

Oil dipstick fits: NISSAN PRIMASTAR OPEL MOVANO A RENAULT MASTER II 2.5D 10.03-

View part

HANS PRIES Oil dipstick 208 550

Oil dipstick fits: OPEL MOVANO A RENAULT MASTER II 2.2D/2.5D 12.97-

View part

HANS PRIES Brake disc 208 551

Brake disc rear L/R fits: NISSAN INTERSTAR, NV400 OPEL MOVANO B RENAULT MASTER III 2.3D 02.10-12.24

View part

HANS PRIES Pneumatic clutch bearing 208 552

Hydraulic concentric bearing fits: CHEVROLET CRUZE, MALIBU, ORLANDO OPEL ASTRA J, ASTRA J GTC, CASCADA, INSIGNIA A, ZAFIRA C 1.4-2.4 07.08-

View part

HANS PRIES Timing gear cover gasket 208 553

Timing gear cover gasket fits: CHEVROLET AVEO, CRUZE, ORLANDO, TRAX OPEL ADAM, ASTRA J, ASTRA J GTC, CASCADA, CORSA D, CORSA E, INSIGNIA A, MERIVA B, MOKKA / MOKKA X, ZAFIRA C 1.2-1.4LPG 09.09-

View part

HANS PRIES Expansion tank 208 556

Coolant expansion tank fits: OPEL SIGNUM, VECTRA C, VECTRA C GTS 04.02-01.09

View part

HANS PRIES Gear shifter mechanism repair kit 208 558

Gear shifter repair kit fits: OPEL ADAM, CORSA D, CORSA E 1.0-1.7D 07.06-06.19

View part

HANS PRIES Tie rod (with no end) 208 559

Tie rod (with no end) L/R (length: 298mm) fits: OPEL MERIVA B 1.3D-1.7D 06.10-03.17

View part

HANS PRIES Tie rod (with no end) 208 560

Tie rod (with no end) L/R (length: 328mm) fits: CHEVROLET ORLANDO OPEL MERIVA B, ZAFIRA C 1.4-2.0D 02.11-

View part

HANS PRIES Tie rod (with no end) 208 563

Tie rod (with no end) L/R (length: 295mm) fits: OPEL ADAM, CORSA E 1.0-1.6 10.12-12.19

View part

HANS PRIES Stabilizer link 208 564

Stabilizer link front L/R 310mm fits: OPEL ADAM, CORSA E 1.0-1.6 10.12-12.19

View part

HANS PRIES Stabilizer link 208 565

Stabilizer link front L/R 297mm fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

HANS PRIES Stabilizer link 208 566

Stabilizer link front R 290mm fits: OPEL ASTRA J, ASTRA J GTC, CASCADA 1.4-2.0D 10.11-04.19

View part

HANS PRIES Stabilizer link 208 567

Stabilizer link front L 290mm fits: OPEL ASTRA J, ASTRA J GTC, CASCADA 1.4-2.0D 10.11-04.19

View part

HANS PRIES Tie rod end 208 568

Tie rod end L fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

HANS PRIES Tie rod end 208 569

Tie rod end R fits: FIAT DOBLO, DOBLO CARGO OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 01.10-

View part

HANS PRIES Front ball joint 208 571

Axle ball joint L/R (bottom front) (cone diameter 18mm, with extra materials) fits: CHEVROLET AVEO, AVEO / KALOS, TRAX OPEL MOKKA / MOKKA X 1.2-1.8 05.03-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account