Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Intake manifold pressure sensor 208 250

Intake manifold pressure sensor (3 pin) fits: CHEVROLET CRUZE, ORLANDO, TRAX OPEL ADAM, ASTRA J, ASTRA J GTC, CASCADA, CORSA D, CORSA E, INSIGNIA A, MERIVA B, MOKKA / MOKKA X 1.4/1.4LPG/1.6 12.09-

View part

HANS PRIES Coolant temperature sensor 208 251

Coolant temperature sensor (number of pins: 2, black) fits: ALFA ROMEO GIULIETTA, MITO CHEVROLET AVEO CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500, 500 C, 500L 0.9-2.0D 09.03-

View part

HANS PRIES MacPherson strut mount 208 252

MacPherson strut mount front L/R (with a bearing) fits: OPEL ASTRA G, ASTRA G CLASSIC, COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA B, CORSA C, MERIVA A, TIGRA, VECTRA B 1.0-2.6 09.95-

View part

HANS PRIES Air blower regulation element 208 254

Air blower regulation element fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA B, CORSA C, TIGRA 1.0-1.8 03.93-

View part

HANS PRIES Wheel bearing kit 208 255

Wheel bearing set with hub front L/R (55x90x54) fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D/Electric 02.10-

View part

HANS PRIES Wheel bearing kit 208 257

Wheel bearing kit front L/R (40x72x36) fits: OPEL AGILA B SUZUKI IGNIS II, SPLASH, SWIFT III, SWIFT IV 1.0-1.5 09.03-

View part

HANS PRIES Air blower regulation element 208 259

Air blower regulation element (resistor) fits: OPEL VIVARO A RENAULT TRAFIC II 1.9D-2.5D 02.01-

View part

HANS PRIES Shock absorber dust cover 208 261

Shock absorber dust cover, front fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D/Electric 02.10-

View part

HANS PRIES Shock absorber bumper 208 262

Shock absorber bumper front L/R (height 145mm) fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D/Electric 02.10-

View part

HANS PRIES MacPherson strut mount 208 263

MacPherson strut mount front L/R (with a bearing) fits: NISSAN NV400 OPEL MOVANO B RENAULT MASTER III 2.3D 02.10-

View part

HANS PRIES Axle rubber boot set 208 264

Joint rubber boot front/inside (fi: 28/77) (length96) (set) fits: NISSAN INTERSTAR, PRIMASTAR OPEL MOVANO A, MOVANO B, VIVARO A RENAULT MASTER II, MASTER III, TRAFIC II 1.9D-3.0D 07.98-

View part

HANS PRIES Engine mount 208 273

Engine mount rear R, rubber-metal fits: CHEVROLET CRUZE, ORLANDO OPEL ASTRA J, ASTRA J GTC, CASCADA, ZAFIRA C 1.3D-2.0D 05.09-

View part

HANS PRIES Engine mount 208 278

Engine mount front R, top, rubber-metal fits: OPEL ADAM, CORSA C, CORSA D, CORSA E 1.0-1.7D 07.05-12.19

View part

HANS PRIES Engine mount 208 279

Engine mount front L, top, hydraulic fits: OPEL CORSA D 1.0-1.4LPG 07.06-08.14

View part

HANS PRIES Wheel hub 208 280

Wheel hub front fits: FIAT GRANDE PUNTO, PUNTO, PUNTO EVO OPEL ADAM, CORSA D, CORSA E 1.0-1.9D 10.05-

View part

HANS PRIES Brake disc 208 282

Brake disc front L/R fits: FIAT 500L, DOBLO, DOBLO CARGO, DOBLO FURGON/NADWOZIE WIELKOPRZESTRZENNE OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR 1.3D-2.0D 10.05-

View part

HANS PRIES Steering gear boot 208 289

Steering gear boot L/R (length200mm 12mm/55mm) fits: ABARTH GRANDE PUNTO, PUNTO, PUNTO EVO ALFA ROMEO MITO CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500L 0.9-Electric 06.05-

View part

HANS PRIES Engine mount 208 291

Engine mount on engine side R, hydraulic fits: CHEVROLET CRUZE, ORLANDO OPEL ASTRA J, ASTRA J GTC, CASCADA, ZAFIRA C 1.4/1.4LPG/1.6 12.09-

View part

HANS PRIES Wiper motor 208 294

Wiper motor front fits: OPEL COMBO FURGON/NADWOZIE WIELKOPRZESTRZENNE, COMBO TOUR, CORSA C, CORSA D, TIGRA 09.00-

View part

HANS PRIES Front track control arm silent block 208 297

Front track control arm silent block L/R (22x60 mm) fits: OPEL ASTRA J GTC, INSIGNIA A, INSIGNIA A COUNTRY 1.4-2.8 07.08-04.18

View part

HANS PRIES MacPherson strut mount 208 300

MacPherson strut mount front L/R (with a bearing) fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 1.4-2.8 07.08-03.17

View part

HANS PRIES Shock absorber bumper 208 301

Shock absorber bumper front L/R (height 40mm) fits: OPEL ADAM, ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, CORSA D, CORSA E, MERIVA B, ZAFIRA B 1.0-2.2 02.98-06.19

View part

HANS PRIES Engine mount 208 302

Engine mount rear R, top, rubber-metal fits: OPEL ASTRA G, ASTRA G CLASSIC, ASTRA H, ASTRA H GTC, ZAFIRA A, ZAFIRA B, ZAFIRA B FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.7D/1.9D/2.0D 02.98-04.15

View part

HANS PRIES Engine mount 208 303

Engine mount front L, rubber-metal fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 2.0-2.8 07.08-03.17

View part

HANS PRIES Engine mount 208 304

Engine mount on engine side R, rubber-metal fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 2.0/2.0ALK 07.08-03.17

View part

HANS PRIES Brake disc 208 306

Brake disc rear L/R fits: OPEL INSIGNIA A, INSIGNIA A COUNTRY 1.4-2.8 07.08-03.17

View part

HANS PRIES Brake disc 208 309

Brake disk, rear OPEL ASTRA H, J/GTC, MOKKA 1.3-CDTI-2.0D 08.09-

View part

HANS PRIES Brake disc 208 310

Brake disk, rear OPEL ASTRA H, J/GTC, CASCADA, ZAFIRA 1.3CDTI-2.0D 08.09-

View part

HANS PRIES Air cooler pipe gasket 208 313

Air cooler pipe gasket (x4mm) fits: OPEL ASTRA H, ASTRA H GTC, ASTRA J, ASTRA J GTC, CASCADA, INSIGNIA A, INSIGNIA A COUNTRY, ZAFIRA B, ZAFIRA C

View part

HANS PRIES Exhaust system gasket 208 315

Exhaust system gasket/seal fits: OPEL MOVANO A, VIVARO A RENAULT MASTER II, TRAFIC II 2.5D 10.03-

View part

HANS PRIES Turbocharger gasket 208 316

Turbocharger gasket fits: OPEL AGILA A, ASTRA H, ASTRA H GTC, CORSA C, MERIVA A, SIGNUM, TIGRA, VECTRA C, VECTRA C GTS, ZAFIRA B 1.3D/1.7D/1.9D 06.03-04.15

View part

HANS PRIES Intake manifold gasket 208 317

Suction manifold gasket fits: ALFA ROMEO MITO CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500, 500 C, 500L, 500X, DOBLO, DOBLO CARGO 1.3D 09.03-

View part

HANS PRIES Thermostat housing 208 318

Thermostat housing fits: CHEVROLET AVEO, CRUZE, ORLANDO, TRAX OPEL ASTRA J, ASTRA J GTC, INSIGNIA A, MOKKA / MOKKA X, ZAFIRA C 1.6-1.8LPG 07.08-

View part

HANS PRIES Crankshaft oil seal 208 319

Crankshaft oil seal housing of a gearbox (93x172/139,7x12) fits: MERCEDES 190 (W201) ALFA ROMEO 145, 146, 147, 155, 156, 159, 166, 33, 4C, 4C SPIDER, BRERA, GIULIETTA, GT, GTV 1.2-2.4D 08.73-

View part

HANS PRIES Engine mount 208 325

Engine mount front L, rubber-metal fits: FIAT CROMA OPEL INSIGNIA A, SIGNUM, VECTRA C, VECTRA C GTS 1.9D/2.0 04.04-03.17

View part

HANS PRIES Crankshaft sensor 208 329

Crankshaft position sensor fits: OPEL ANTARA A, ASTRA J, ASTRA J GTC, CASCADA, INSIGNIA A, INSIGNIA A COUNTRY, INSIGNIA B, INSIGNIA B COUNTRY, INSIGNIA B GRAND SPORT, ZAFIRA C 2.0D 07.08-06.22

View part

HANS PRIES Brake disc 208 343

Brake disc front L/R fits: CHEVROLET TRAX OPEL MOKKA / MOKKA X 1.4-1.8 06.12-

View part

HANS PRIES Stabilizer link 208 344

Stabilizer link front L 286mm fits: CHEVROLET TRAX OPEL MOKKA / MOKKA X 1.4-1.8 06.12-

View part

HANS PRIES Stabilizer link 208 345

Stabilizer link front R 286mm fits: CHEVROLET TRAX OPEL MOKKA / MOKKA X 1.4-1.8 06.12-

View part

HANS PRIES MacPherson strut mount 208 346

MacPherson strut mount front L/R fits: CHEVROLET CRUZE, ORLANDO, TRAX, VOLT OPEL MOKKA / MOKKA X 1.4-2.0D 05.09-

View part

HANS PRIES ABS sensor 208 348

ABS sensor front L/R fits: NISSAN PRIMASTAR OPEL VIVARO A RENAULT TRAFIC II 1.9D-2.5D 02.01-

View part

HANS PRIES Windscreen washer system elements 208 349

Windscreen washer system elements - windscreen washer system (T-connector) fits: DS DS 3, DS 4, DS 5 CITROEN BERLINGO, BERLINGO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.0-Electric 08.84-

View part

HANS PRIES Gas spring 208 350

Gas spring trunk lid L/R max length: 603mm, stroke:252mm (for 3-door version) fits: OPEL CORSA D FURGON/HATCHBACK/HATCHBACK 07.06-08.14

View part

HANS PRIES Gas spring 208 351

Gas spring trunk lid L/R max length: 610mm, stroke:265mm (for 5-door version) fits: OPEL CORSA D HATCHBACK 07.06-08.14

View part

HANS PRIES Tie rod end 208 356

Tie rod end R fits: OPEL ASTRA H, ASTRA H CLASSIC, ASTRA H GTC, MERIVA B, ZAFIRA B, ZAFIRA B FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.2-2.2 01.04-03.17

View part

HANS PRIES Tie rod end 208 357

Tie rod end L fits: OPEL MERIVA B 1.3D-1.7D 06.10-03.17

View part

HANS PRIES MacPherson strut bearing 208 358

MacPherson strut bearing front L/R fits: OPEL MERIVA B 1.3D-1.7D 06.10-03.17

View part

HANS PRIES Oil pump 208 359

Oil pump fits: CITROEN NEMO, NEMO FURGON/NADWOZIE WIELKOPRZESTRZENNE FIAT 500, 500 C, DOBLO, DOBLO CARGO, DOBLO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.3D 06.03-

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account