Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES Tie rod end 107 510

Tie rod end R fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 1.8-2.8 03.95-03.10

View part

HANS PRIES Tie rod end 107 511

Tie rod end L fits: AUDI 100 C4 2.0-2.8 12.90-07.94

View part

HANS PRIES Tie rod end 107 512

Tie rod end R fits: AUDI 100 C4 2.0-2.8 12.90-07.94

View part

HANS PRIES Tie rod (with end) 107 513

Tie rod (with end) R fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 1.8-2.8 03.95-03.10

View part

HANS PRIES Tie rod (with end) 107 514

Tie rod (with end) L fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 1.8-2.8 03.95-03.10

View part

HANS PRIES Expansion tank 107 519

Coolant expansion tank fits: AUDI A4 B5, A4 B6, A6 C5, A8 D2 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 11.94-03.08

View part

HANS PRIES Tie rod end 107 529

Tie rod end L fits: VW TRANSPORTER T4 1.8-2.8 07.90-06.03

View part

HANS PRIES Tie rod end 107 531

Tie rod end R fits: VW TRANSPORTER T4 1.8-2.8 07.90-06.03

View part

HANS PRIES Expansion tank cap 107 533

Expansion tank cap fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

HANS PRIES Speedometer cable drive 107 535

Speedometer cable drive fits: AUDI A3 SEAT CORDOBA, IBIZA II, LEON, TOLEDO I, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, GOLF III, GOLF IV, NEW BEETLE, PASSAT B3/B4 1.6-2.8 02.88-12.13

View part

HANS PRIES Door handle 107 536

Door handle front L/R (external, with lock hole, black) fits: VW POLO III 1.0-1.9D 10.94-10.99

View part

HANS PRIES Fuel injection pump element 107 539

Solenoid valve fits: AUDI 100 C2, 100 C3, 100 C4, 80 B2, 80 B3, 80 B4, A3, A4 B5, A6 C4, A6 C5, CABRIOLET B3 SEAT ALHAMBRA, AROSA, CORDOBA, IBIZA II, IBIZA III, INCA 1G-SB 08.76-03.10

View part

HANS PRIES Lambda sensor 107 542

Lambda probe (number of wires 2, 975mm) fits: AUDI 100 C3, 100 C4, 80 B2, 80 B3, 80 B4, A6 C4, CABRIOLET B3 SEAT TOLEDO I VW GOLF II, JETTA II, PASSAT B3/B4 1.6-2.3 08.85-03.99

View part

HANS PRIES Fuel pump 107 544

Electric fuel pump (in housing) fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF II, GOLF III, JETTA II, PASSAT B3/B4, POLO III, POLO III CLASSIC, VENTO 1.0-1.8 08.87-10.02

View part

HANS PRIES Suspension shock absorber 107 545

Shock absorber front L/R fits: AUDI 80 B4, 90 B2, 90 B3 1.6-2.6 10.84-01.96

View part

HANS PRIES Automatic gearbox gasket set 107 547 001

View part

HANS PRIES Drive axle seal/leak stopper 107 548

Drive axle seal/leak stopper front L/R (50x65,2x10/10) fits: AUDI 100 C4, 80 B4, A3, A4 B5, A6 C4, A6 C5, CABRIOLET B3, COUPE B3 SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, LEON 1.4-2.9 08.75-12.13

View part

HANS PRIES Lubricants and greases 107 549 001

ATF oil (1L)

View part

HANS PRIES Engine valve 107 554

Intake valve (39x7x106) fits: SEAT TOLEDO II VW BORA, BORA I, GOLF III, GOLF IV, PASSAT B3/B4, PASSAT B5, SHARAN, TRANSPORTER T4, VENTO 2.3/2.8 06.91-06.06

View part

HANS PRIES Car window lifter switch 107 555

Car window regulator switch L/R fits: AUDI 100 C3, 100 C4, 80 B3, 80 B4, A6 C4, CABRIOLET B3 1.4-2.8 08.82-08.00

View part

HANS PRIES Stabilizer bar bushing 107 556

Stabilizer bar bushing front inner L/R fits: AUDI 80 B2, 80 B3 VW PASSAT B2 1.3-2.3 08.78-10.91

View part

HANS PRIES Stabilizer bar sleeve 107 557

Rubber ring for stabilizing bar front L/R fits: AUDI 80 B2, 80 B3 VW PASSAT B2 1.3-2.3 08.78-10.91

View part

HANS PRIES Stabilizer bar sleeve 107 557 001

Tuleja łącznika stabilizatora przód L/P AUDI 80, 90 VW PASSAT 1.3-2.3 08.78-10.91

View part

HANS PRIES Cooling system stub-pipe 107 613

074121132 sensor housing at the head of VW T4 2,4 D

View part

HANS PRIES Mounting fasteners 107 617

Mounting fastener

View part

HANS PRIES Cooling system stub-pipe 107 623

Cooling system stub-pipe (number of outputs: 2) fits: VW TRANSPORTER T4 2.4D/2.5 07.90-06.03

View part

HANS PRIES Brake disc 107 629

Brake disc rear L/R fits: FORD GALAXY I, GALAXY MK I SEAT ALHAMBRA VW SHARAN, SHARAN FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.8-2.8 03.95-03.10

View part

HANS PRIES Oil pump 107 630

Oil pump fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW GOLF III, PASSAT B3/B4 2.0 08.88-08.99

View part

HANS PRIES Cooling system stub-pipe 107 635

Cooling system stub-pipe (number of outputs: 1) fits: SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, PASSAT B3/B4, POLO III CLASSIC, SHARAN 1.6-2.0 02.88-03.10

View part

HANS PRIES Cooling system stub-pipe 107 637

Cooling system stub-pipe (number of outputs: 1) fits: VW LT 28-35 I 2.4/2.4D 01.79-06.96

View part

HANS PRIES Cooling system stub-pipe 107 638

Cooling system stub-pipe (number of outputs: 1) fits: AUDI 100 C4, 80 B3, 80 B4, A6 C4, CABRIOLET B3, COUPE B3 SEAT CORDOBA, IBIZA II, TOLEDO I VW CORRADO, GOLF II, GOLF III 1.6-2.0 08.83-09.01

View part

HANS PRIES Shock absorber bumper 107 641

Shock absorber bumper rear L/R (height 144mm) fits: AUDI A3 SEAT LEON, TOLEDO II, TOLEDO IV SKODA OCTAVIA I, RAPID, ROOMSTER, ROOMSTER PRAKTIK VW BORA, BORA I, GOLF IV, JETTA IV 1.0-2.5 09.96-05.22

View part

HANS PRIES Shock absorber dust cover 107 642

Shock absorber dust cover, front fits: FORD GALAXY I SEAT ALHAMBRA VW SHARAN 1.8-2.8 03.95-03.10

View part

HANS PRIES Shock absorber bumper 107 643

Shock absorber bumper rear L/R (height 134mm) fits: SEAT CORDOBA, IBIZA II VW POLO, POLO III, POLO III CLASSIC 1.0-2.0 02.93-10.02

View part

HANS PRIES Shock absorber bumper 107 644

Shock absorber bumper rear L/R (height 111mm) fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II VW POLO, POLO III, POLO III CLASSIC 1.0-2.0 02.93-12.02

View part

HANS PRIES Shock absorber dust cover 107 645

Shock absorber dust cover, rear fits: SEAT CORDOBA, IBIZA II VW POLO III, POLO III CLASSIC 1.0-2.0 02.93-10.02

View part

HANS PRIES Shock absorber dust cover 107 646

Shock absorber dust cover, rear fits: VW POLO, POLO III 1.0-1.9D 10.94-09.01

View part

HANS PRIES Shock absorber bumper 107 648

Shock absorber bumper rear L/R (height 130mm) fits: AUDI A3 CHEVROLET AVEO / KALOS MAZDA 2 SEAT LEON, TOLEDO I, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, GOLF IV, JETTA IV 1.2-2.5 05.91-

View part

HANS PRIES Shock absorber dust cover 107 649

Shock absorber dust cover, rear fits: AUDI A1, A3, A4 B5 SEAT AROSA, CORDOBA, IBIZA III, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, TOLEDO II, TOLEDO IV SKODA FABIA I, FABIA II 1.0-2.5 10.93-

View part

HANS PRIES Shock absorber dust cover 107 650

Shock absorber dust cover, rear fits: AUDI A2, A3, A4 B5 FORD FIESTA V, FIESTA VI, FUSION MAZDA 2, 3, 5 SEAT IBIZA III, LEON, TOLEDO II SKODA FABIA I, FABIA II, FABIA III 1.2-2.5 01.95-10.21

View part

HANS PRIES Shock absorber bumper 107 652

Shock absorber bumper rear L/R (height 136mm) fits: AUDI A4 B6, A6 C5 SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 1.6-3.0 08.96-03.08

View part

HANS PRIES Shock absorber bumper 107 653

Shock absorber bumper rear L/R (height 134mm) fits: AUDI A4 B5, A4 B6, A4 B7, A6 C5, A6 C6 SEAT EXEO, EXEO ST VW PASSAT B5, PASSAT B5.5 1.6-3.2 08.96-05.13

View part

HANS PRIES MacPherson strut mount 107 657

MacPherson strut mount rear L/R fits: AUDI 80 B4 1.6-2.8 09.91-01.96

View part

HANS PRIES MacPherson strut mount 107 658

MacPherson strut mount rear L/R fits: AUDI 80 B4 1.6-2.8 09.91-01.96

View part

HANS PRIES Shock absorber bumper 107 661

Shock absorber bumper rear L/R (height 127mm) fits: AUDI A4 B5 1.6-2.8 11.94-09.01

View part

HANS PRIES MacPherson strut mount 107 663

MacPherson strut mount rear L/R fits: AUDI A4 B5 1.6-2.8 11.94-09.01

View part

HANS PRIES MacPherson strut mount 107 664

MacPherson strut mount rear L/R fits: AUDI A4 B5 1.6-2.8 11.94-09.01

View part

HANS PRIES Shock absorber bumper 107 667

Shock absorber bumper front L/R (height 85mm) fits: AUDI A4 B5, A4 B6, A4 B7, A4 B8, A6 C5, A6 C6 SEAT EXEO, EXEO ST SKODA SUPERB I VW PASSAT B5, PASSAT B5.5 1.6-3.2 11.94-12.15

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account