Partios Wholesale catalogue

Hans Pries Distributor | Parts

Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)

22,627 current catalogue lines

About the HANS PRIES range

Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.

Catalogue products

Vehicle references are indicative — confirm against the article number.

HANS PRIES MacPherson strut bearing 103 486

MacPherson strut bearing front L/R fits: AUDI A1, A3, TT CHEVROLET AVEO / KALOS, MATIZ, SPARK FORD GALAXY I SEAT ALHAMBRA, AROSA, CORDOBA, CORDOBA VARIO, IBIZA II, IBIZA IV 0.6-Electric 02.88-

View part

HANS PRIES Shock absorber bumper 103 487

Shock absorber bumper front L/R (height 84mm) fits: SEAT CORDOBA, IBIZA II, TOLEDO I, TOLEDO II VW GOLF II, GOLF III, JETTA II, PASSAT B3/B4, SHARAN, VENTO 1.0-2.0 08.83-03.10

View part

HANS PRIES Shock absorber bumper 103 488

Shock absorber bumper front L/R (height 83mm) fits: AUDI A1 SEAT CORDOBA, IBIZA II, LEON, TOLEDO I, TOLEDO II, TOLEDO IV SKODA FABIA II, FABIA III, FELICIA I, FELICIA II 1.0-2.8 02.88-12.22

View part

HANS PRIES MacPherson strut mount 103 490

MacPherson strut mount front L/R (with a bearing) fits: VW GOLF II, GOLF III, PASSAT B3/B4, VENTO 1.6-2.0 02.88-04.99

View part

HANS PRIES MacPherson strut mount 103 491

MacPherson strut mount front L/R fits: CHEVROLET AVEO / KALOS FORD GALAXY I SEAT ALHAMBRA, CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, PASSAT B3/B4, POLO III CLASSIC 1.0-2.8 02.88-

View part

HANS PRIES Spring disc front/rear 103 492

357412341A plate spring front suspension VW GOLF 1,4-1,9 D 9/94-, POLO

View part

HANS PRIES Suspension shock absorber 103 494

Shock absorber front L/R fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW GOLF II, GOLF III, JETTA II, PASSAT B3/B4, VENTO 1.0-2.8 08.83-10.02

View part

HANS PRIES Shock absorber dust cover 103 495

Shock absorber dust cover, front fits: SEAT CORDOBA, IBIZA II VW GOLF II, GOLF III, PASSAT B3/B4, VENTO 1.4-2.0 02.88-09.02

View part

HANS PRIES Shock absorber dust cover 103 496

Shock absorber dust cover, front fits: AUDI A1, A3, TT SEAT AROSA, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, MII, TOLEDO II, TOLEDO IV SKODA CITIGO, E-CITIGO, FABIA I 1.0-Electric 02.88-

View part

HANS PRIES Steering rack 103 497

Steering rack without power steering manual (new) fits: VW GOLF II, JETTA II, PASSAT B3/B4, SCIROCCO 1.0-2.0 08.82-05.97

View part

HANS PRIES Tie rod (with end) 103 501

Tie rod (with end) L fits: VW PASSAT B3/B4 1.6-2.8 02.88-05.97

View part

HANS PRIES Tie rod (with end) 103 503

Tie rod (with end) R fits: VW PASSAT B3/B4 1.6-2.8 02.88-05.97

View part

HANS PRIES Steering gear boot 103 504

Steering gear boot L/R (length138mm 13mm/45mm) fits: VW GOLF II, GOLF III, JETTA II, PASSAT B3/B4, VENTO 1.0-2.8 08.83-04.99

View part

HANS PRIES Driveshaft joint 103 506

CV joint external L/R (22z/30z/53mm) fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, GOLF II, JETTA II, PASSAT B3/B4 1.6-2.0 08.83-01.04

View part

HANS PRIES Driveshaft joint 103 507

CV joint external L/R (22z/30z/53mm) fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF III, PASSAT B3/B4, POLO III CLASSIC, VENTO 1.6-2.0 02.88-01.04

View part

HANS PRIES Driveshaft joint 103 508

CV joint external L/R (36z/30z) fits: AUDI A3, TT SEAT CORDOBA, LEON, TOLEDO I, TOLEDO II SKODA OCTAVIA I VW BORA, BORA I, CORRADO, GOLF III, GOLF IV, NEW BEETLE, PASSAT B3/B4 1.4-2.9 06.91-12.13

View part

HANS PRIES Axle rubber boot set 103 509

Joint rubber boot front/outside (fi: 22/82) (length98) (set) fits: AUDI 80 B3 VW CADDY II, PASSAT B3/B4 1.4-2.3 06.86-01.04

View part

HANS PRIES Wheel bearing kit 103 510

Wheel bearing kit front L/R (40x72x37) fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II, GOLF III, GOLF IV 1.0-2.8 08.83-01.04

View part

HANS PRIES Rear wheel hub plug 103 511

Rear wheel hub plug L/R rear fits: AUDI 80 B2, 80 B3 SEAT AROSA, CORDOBA, IBIZA II, TOLEDO I VW GOLF I, GOLF II, GOLF III, JETTA I, JETTA II, PASSAT B1, PASSAT B2, PASSAT B3/B4 0.9-2.8 05.73-06.04

View part

HANS PRIES Brake drum 103 513

357501615 Drum Brakes

View part

HANS PRIES Hub seal 103 514

Wheel hub seal (40x52/52x7,5) fits: AUDI 100 C2, 100 C3, 100 C4, 80 B2, 80 B3, CABRIOLET B3 SEAT AROSA, CORDOBA, IBIZA II, INCA, TOLEDO I SKODA FELICIA I, FELICIA II 0.9-2.8 05.73-06.04

View part

HANS PRIES Shock absorber bumper 103 516

Shock absorber bumper rear L/R (height 155mm) fits: VW PASSAT B3/B4 1.6-2.8 02.88-05.97

View part

HANS PRIES Shock absorber dust cover 103 519

Shock absorber dust cover, rear fits: AUDI 80 B3, A4 B5 VW PASSAT B3/B4, POLO, POLO III 1.4-2.8 10.86-09.01

View part

HANS PRIES Handbrake cable 103 520

Handbrake cable rear L/R (1636mm/1025mm, brake type: drum) fits: VW PASSAT B3/B4 1.6-2.8 02.88-05.97

View part

HANS PRIES Handbrake cable 103 521 001

Handbrake cable rear L/R

View part

HANS PRIES Brake master cylinder 103 522

Brake master cylinder (20,7mm) fits: SEAT IBIZA II, TOLEDO I VW CADDY I, GOLF I, GOLF II, GOLF III, JETTA II, LUPO I, PASSAT B3/B4, POLO, POLO III, POLO III CLASSIC, VENTO 1.0-2.8 01.83-07.05

View part

HANS PRIES Brake master cylinder 103 523

Brake master cylinder (22,2mm) fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I SKODA FELICIA I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORRADO 1.0-2.9 02.86-01.04

View part

HANS PRIES Brake disc 103 525

357615301 Brake disc

View part

HANS PRIES Brake disc 103 526

357615601 Brake disc

View part

HANS PRIES Brake disc 103 527

Brake disc 357615601B

View part

HANS PRIES Clutch servo 103 533

Clutch actuator fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW CADDY II, GOLF II, GOLF III, PASSAT B3/B4, POLO III CLASSIC, TRANSPORTER T4, VENTO 1.8-2.8 08.88-01.04

View part

HANS PRIES Clutch cable 103 534

Clutch cable (1335mm/960mm) fits: VW PASSAT B3/B4 1.6-2.8 02.88-05.97

View part

HANS PRIES Clutch master cylinder 103 535

Clutch master cylinder (19,05mm), vehicle with the steering wheel on the left side fits: VW GOLF II, PASSAT B3/B4 1.6-2.8 02.88-05.97

View part

HANS PRIES Accelerator cable 103 536

Accelerator cable (length 920mm/654mm) fits: SEAT TOLEDO I VW GOLF I, GOLF II, JETTA I, JETTA II, PASSAT B3/B4 1.5D/1.6D/1.9D 08.76-03.99

View part

HANS PRIES Heater hose 103 538 001

Heater hose (16mm, black)

View part

HANS PRIES Bonnet related parts 103 540

engine bonnet support stud

View part

HANS PRIES Bonnet related parts 103 541

engine bonnet lifting cable (quantity per packaging: 1pcs) fits: VW PASSAT B3 02.88-10.93

View part

HANS PRIES Door lock/elements 103 542

front/rear

View part

HANS PRIES Car window regulator elements 103 544

Handle Window lifter repair kit L/R fits: VW PASSAT B3/B4, TRANSPORTER T4 02.88-06.03

View part

HANS PRIES Strip mounting 103 545

Strip mounting fits: VW GOLF II, JETTA II, PASSAT B3/B4 08.83-05.97

View part

HANS PRIES Bolts (vehicles) 103 547

View part

HANS PRIES Seat back regulation 103 558

Seat back regulation fits: VW GOLF II, GOLF III, JETTA II, LUPO I, PASSAT B3/B4, POLO III, POLO III CLASSIC, TRANSPORTER T4, VENTO 08.83-07.05

View part

HANS PRIES Ignition switch insert 103 560

Ignition lock cylinder fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, PASSAT B3/B4, POLO, POLO III CLASSIC 1.0-2.9 02.88-07.06

View part

HANS PRIES Ignition switch connection block 103 561

Ignition switch connection block (6 pin) fits: SEAT AROSA, CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF II, GOLF III, JETTA II, LUPO I, PASSAT B3/B4, POLO, POLO II 1.0-2.8 08.83-07.05

View part

HANS PRIES Fuel pump 103 562

Electric fuel pump (cartridge) fits: SEAT TOLEDO I VW GOLF II, JETTA II, PASSAT B3/B4, POLO II 1.0-2.0 08.83-03.99

View part

HANS PRIES Controller/relay of glow plugs 103 563

Controller/relay of glow plugs fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I SKODA FABIA I, FELICIA I, FELICIA II VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.3/1.6/1.9D 03.91-12.07

View part

HANS PRIES Switch-keys (other) 103 565

Switch (4 pin) fits: AUDI A3 FORD GALAXY I SEAT ALHAMBRA, CORDOBA, IBIZA II, TOLEDO I SKODA OCTAVIA I VW BORA, BORA I, CADDY II, GOLF II, GOLF III, GOLF IV, JETTA II, NEW BEETLE 08.83-03.10

View part

HANS PRIES Radiator fan thermostatic switch-off 103 566

Radiator fan thermostatic switch fits: AUDI A6 C5 SEAT ALHAMBRA, CORDOBA, IBIZA II, TOLEDO I VW GOLF III, LT 28-35 II, LT 28-46 II, NEW BEETLE, PASSAT B3/B4, SHARAN, VENTO 1.6D-2.8 08.88-09.10

View part

Buying with Partios

Buying HANS PRIES parts through Partios

Are these genuine HANS PRIES parts?

Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source HANS PRIES parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.

Do you supply HANS PRIES parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on HANS PRIES parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a HANS PRIES order?

It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for HANS PRIES parts?

No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account