Partios Wholesale catalogue
Hans Pries Distributor | Parts
Gas spring (552) · Engine mount (551) · Wheel suspension track control arm, front (468) · ABS sensor (453) · Brake disc (434) · Stabilizer link (397) · Axle rubber boot set (360) · Tie rod end (348) · 600 further part types (18,395)
22,627 current catalogue lines
About the HANS PRIES range
Hans Pries is a multi-system brand rather than a single-product one: the range Partios carries runs to 22,627 lines across 608 distinct part types. The largest groups are gas spring (552), engine mount (551), wheel suspension track control arm, front (468), ABS sensor (453) and brake disc (434). They account for only 13% of the range, though. The other 19,103 lines sit across 602 further part types, which is what makes this a range to search rather than browse. That tail includes axle rubber boot set, tie rod end and stabilizer bar bushing. Typical buyers are workshops, motor factors and exporters, where a range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. At 22,627 lines this is one of the larger single-brand ranges Partios carries, and application coverage is usually what brings buyers to it.
Catalogue products
Vehicle references are indicative — confirm against the article number.
HANS PRIES Ignition leads set 102 982
Ignition leads set fits: AUDI 80 B2, 80 B3, 80 B4 SEAT CORDOBA, IBIZA II, TOLEDO I VW GOLF I, GOLF II, GOLF III, GOLF IV, JETTA II, PASSAT B2, PASSAT B3/B4, POLO II, POLO III 1.0-2.0 08.78-10.02
View partHANS PRIES Clutch cable 102 984 001
View partHANS PRIES Engine bonnet cable 102 988
Engine hood cable (1750mm/1690mm) fits: SEAT TOLEDO I VW GOLF II, JETTA II 1.0-2.0 08.83-03.99
View partHANS PRIES Door handle 102 990
Door handle rear R (external, black) fits: VW GOLF I, GOLF II, JETTA I, JETTA II, PASSAT B1, PASSAT B2 1.0-2.0 05.73-12.92
View partHANS PRIES Window lifter 102 991
Window regulator rear L (manual, without motor, number of doors: 4) fits: VW GOLF II, JETTA II, PASSAT B2 09.79-12.92
View partHANS PRIES Window lifter 102 992
Window regulator rear R (manual, without motor, number of doors: 4) fits: VW GOLF II, JETTA II, PASSAT B2 09.79-12.92
View partHANS PRIES Cooling system rubber hose 102 996
Cooling system rubber hose bottom (32mm/32mm) fits: VW GOLF III, VENTO 1.6-2.0 11.91-04.99
View partHANS PRIES Cooling system metal pipe 102 997
Cooling system metal pipe bottom fits: VW GOLF III, VENTO 1.4/1.6 10.91-04.99
View partHANS PRIES Cooling system rubber hose 102 999
Cooling system rubber hose top fits: VW GOLF III, GOLF IV, VENTO 1.8/1.9D/2.0 11.91-06.02
View partHANS PRIES Expansion tank 102576
171121407F zbiornik wyrównawczy chłodnicy GOLF 2E+D 1,6-1,8 PASSAT A 1,3-2,3 8
View partHANS PRIES Stabilizer bar bushing 102786
191411314 Poduszka stabilizatora Seat IBIZA II Volkswagen GOLF II,GOLF III,
View partHANS PRIES Stabilizer bar sleeve 102790
191411329 poduszka gumowa łącznika stabilizatora VW GOLF/VENTO 91-
View partHANS PRIES Rear suspension beam silent block 102823
Tuleja tylnej belki Seat Toledo, VW Golf II,III Jetta II
View partHANS PRIES Cooling system rubber hose 103 000
Cooling system rubber hose top fits: VW GOLF III, VENTO 1.4/1.6 10.91-04.99
View partHANS PRIES Cooling system rubber hose 103 001
Cooling system rubber hose bottom fits: SEAT CORDOBA, IBIZA II VW GOLF II, GOLF III, JETTA II, VENTO 1.0-1.6 08.85-10.02
View partHANS PRIES Cooling system rubber hose 103 002
Cooling system rubber hose bottom fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW GOLF III, PASSAT B3/B4, POLO III CLASSIC, VENTO 1.6-2.0 02.88-09.02
View partHANS PRIES Engine radiator 103 003
Engine radiator (manual) fits: VW GOLF III, PASSAT B3/B4, VENTO 1.8/1.9D 05.89-04.99
View partHANS PRIES Engine radiator 103 004
Engine radiator (manual) fits: SEAT CORDOBA, IBIZA II VW GOLF III, VENTO 1.6-2.0 11.91-09.02
View partHANS PRIES Expansion tank 103 006
Coolant expansion tank (with level sensor) fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, CORRADO, GOLF II 10.81-01.04
View partHANS PRIES Water pump gasket 103 007
Water pump gasket fits: AUDI A1, A2, A3, A3 ALLSTREET, A4 B5, A4 B6, A4 B8, A5, A6 C5, A6 C6, A6 C7, A7, A8 D3, A8 D4, Q2, Q3, Q5, TT CUPRA ATECA, FORMENTOR SEAT ALHAMBRA, ALTEA 1.0-6.3 08.83-
View partHANS PRIES Engine mount 103 010
Engine mount rear R, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA VW CADDY II, GOLF III, POLO III, POLO III CLASSIC, VENTO 1.3-2.0 11.91-01.04
View partHANS PRIES Engine mount 103 011
Engine mount rear R, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, PASSAT B3/B4, POLO III, POLO III CLASSIC, VENTO 1.4-2.0 11.91-01.04
View partHANS PRIES Engine mount 103 012
Engine mount rear R, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA VW CADDY II, GOLF III, POLO III CLASSIC, VENTO 1.0-1.9D 10.91-06.03
View partHANS PRIES Engine mount 103 015
Engine mount rear R, rubber-metal fits: VW GOLF III, VENTO 1.9D 08.93-04.99
View partHANS PRIES Engine mount support 103 016
Engine mount support front fits: SEAT CORDOBA, IBIZA II, TOLEDO I VW GOLF III, POLO III CLASSIC, VENTO 1.6-2.0 11.91-10.02
View partHANS PRIES Engine mount 103 017
Engine mount front L, rubber-metal fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF III, GOLF IV, PASSAT B3/B4 1.0-2.9 02.88-01.04
View partHANS PRIES Engine mount 103 018
Engine mount front L/R, middle, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA VW CADDY II, GOLF III, POLO, POLO III CLASSIC, VENTO 1.0-1.9D 10.91-06.03
View partHANS PRIES Engine mount 103 019
Engine mount front R, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA VW CADDY II, GOLF III, POLO III, POLO III CLASSIC, VENTO 1.3-1.9D 11.91-06.03
View partHANS PRIES Engine mount 103 020
Engine mount front L, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, PASSAT B3/B4, POLO III CLASSIC, VENTO 1.0-2.0 11.91-01.04
View partHANS PRIES Engine mount 103 021
Engine mount front L/R, rubber-metal fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, PASSAT B3/B4, POLO, POLO III, POLO III CLASSIC, VENTO 1.4-2.0 08.92-01.04
View partHANS PRIES Exhaust system clasp 103 024
Exhaust system clasp (59,5mm) fits: MERCEDES E (W210) VOLVO 440, 460, 740, 760, 940, 940 II, 960, 960 II, S40 II, S80 I, S90 I, V50, V90 I ALFA ROMEO 155, 156, 159 AUDI 100 C3, 90 B3 1.1-3.5 06.81-
View partHANS PRIES Exhaust system hanger 103 025
Exhaust system hanger fits: SEAT INCA VW CADDY II, GOLF III, PASSAT B3/B4, POLO, POLO III, TRANSPORTER T4, VENTO 1.0-2.8 02.88-01.04
View partHANS PRIES Exhaust system hanger 103 026
Exhaust system hanger fits: AUDI A1, A2, A3, TT FORD FIESTA V, GALAXY I HYUNDAI TUCSON SEAT ALHAMBRA, AROSA, CORDOBA, CORDOBA VARIO, IBIZA II, IBIZA III, IBIZA IV, IBIZA IV ST, INCA 1.0-2.8 11.91-
View partHANS PRIES Wheel suspension track control arm, front 103 031
Front axle track control arm L/R bottom front 19 mm (no ball joint) fits: VW GOLF III, GOLF IV, VENTO 1.4-2.0 08.91-06.02
View partHANS PRIES Wheel suspension track control arm, front 103 032
Front axle track control arm L bottom front 16,5 mm fits: SEAT AROSA, TOLEDO I VW CORRADO, GOLF III, PASSAT B3/B4, VENTO 1.7D-2.9 08.91-06.04
View partHANS PRIES Axle rubber boot set 103 033
Joint rubber boot front/outside (fi: 26/86) (length130) (set) fits: AUDI A3, TT SEAT ALTEA, ALTEA XL, LEON, TOLEDO III SKODA OCTAVIA II, OCTAVIA III, SUPERB II, YETI 1.2-3.2 02.03-08.20
View partHANS PRIES Front ball joint 103 035
Axle ball joint L/R (bottom front) (cone diameter 16,5mm, with extra materials) fits: SEAT TOLEDO I VW CORRADO, GOLF III, PASSAT B3/B4, VENTO 1.9D-2.9 06.91-04.99
View partHANS PRIES Wheel hub 103 036
Wheel hub front fits: SEAT TOLEDO I VW GOLF III, PASSAT B3/B4, VENTO 1.9D/2.0/2.8 06.91-03.99
View partHANS PRIES Wheel bearing kit 103 037
Wheel bearing kit front L/R (40x72x37) fits: SEAT CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II 1.0-2.8 08.83-01.04
View partHANS PRIES Stabilizer bar bushing 103 038
Stabilizer bar bushing front L/R (19mm) fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF III, POLO, POLO III CLASSIC 1.0-2.8 05.91-01.04
View partHANS PRIES Stabilizer bar bushing 103 038 001
1H0411314 poduszka mocowania stabilizatora do nadwozia VW GOLF 3 ( 19mm)
View partHANS PRIES Shock absorber bumper 103 039
Shock absorber bumper front L/R (height 63mm) fits: AUDI A1, A3, TT OPEL ASTRA G, ASTRA G CLASSIC, VECTRA B, ZAFIRA A SEAT AROSA, IBIZA IV, IBIZA IV ST, LEON, TOLEDO II 1.0-Electric 02.88-11.23
View partHANS PRIES MacPherson strut fitting elements 103 040
MacPherson strut fitting element front fits: AUDI A1, A3, TT SEAT AROSA, CORDOBA, CORDOBA VARIO, IBIZA II, IBIZA IV, IBIZA IV ST, INCA, LEON, MII, TOLEDO I, TOLEDO II 1.0-Electric 02.88-11.23
View partHANS PRIES Suspension shock absorber 103 042
Shock absorber front L/R fits: SEAT AROSA, CORDOBA, CORDOBA VARIO, IBIZA II, INCA, TOLEDO I VW CADDY II, CADDY II FURGON/NADWOZIE WIELKOPRZESTRZENNE, GOLF II, GOLF III 1.0-2.0 08.83-07.05
View partHANS PRIES Shock absorber dust cover 103 043
Shock absorber dust cover, front fits: SEAT CORDOBA, IBIZA II, INCA, TOLEDO I VW CADDY II, GOLF III, POLO III CLASSIC, VENTO 1.0-2.8 05.91-01.04
View partHANS PRIES Tie rod (with end) 103 044
Tie rod (with end) L fits: VW GOLF III, PASSAT B3/B4, VENTO 1.4-2.8 02.88-04.99
View partHANS PRIES Tie rod (with end) 103 045
Tie rod (with end) R fits: VW GOLF III, PASSAT B3/B4, VENTO 1.4-2.8 02.88-04.99
View partHANS PRIES Tie rod (with end) 103 046
Tie rod (with end) L fits: SEAT TOLEDO I VW GOLF III, VENTO 1.4-2.8 10.91-04.99
View partBuying with Partios
Buying HANS PRIES parts through Partios
Are these genuine HANS PRIES parts?
- Yes. Every HANS PRIES line here is sourced through Partios's ISO 9001:2015-certified European distribution network.
Can you source HANS PRIES parts that aren't showing in stock?
- Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for HANS PRIES lines that aren't currently available.
Do you supply HANS PRIES parts for export?
- Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.
How do I get trade pricing on HANS PRIES parts?
- Apply for a Partios Wholesale trade account to see trade pricing and availability.
What lead time should I expect on a HANS PRIES order?
- It depends on the line. Stocked HANS PRIES items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.
Is there a minimum order quantity for HANS PRIES parts?
- No. There's no minimum order value or quantity on a Partios trade account. Some HANS PRIES lines are supplied in manufacturer pack sizes, which are shown on the product listing.
No registration needed
See what we can source
Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.
Try the Parts FinderReady to see trade pricing and availability? Apply for a Partios Wholesale account.
Apply for a trade account