Partios Wholesale catalogue

Glyco Distributor | Engine Overhaul Parts

Conrod bearings (715) · Crankshaft bearings (515) · Crankshaft thrust half-ring (140) · Connecting rod bushing (131) · Camshaft bearing (47) · Hub seal (22) · Transmission oil seal (4) · Other special tools (3) · 8 further part types (10)

1,592 current catalogue lines

About the GLYCO range

Partios carries 1,592 Glyco lines of engine overhaul parts, spread across 16 part types. The largest groups are conrod bearings (715), crankshaft bearings (515), crankshaft thrust half-ring (140), connecting rod bushing (131) and camshaft bearing (47). Those six account for most of the catalogue; the remaining 17 lines are spread across 10 further part types, so this is depth in a narrow area rather than broad coverage. That tail includes transmission oil seal, other special tools and valve rocker arm bearing. The range suits engine rebuilders, heavy-duty workshops and exporters. Overhaul work is bought by engine family rather than by part, so completeness of the set matters more than any individual line. 1,592 lines is enough depth to cover the usual applications without a second source.

Catalogue products

Vehicle references are indicative — confirm against the article number.

GLYCO Conrod bearings 71-4157/4 0.50mm

Conrod bearing set (+0,50) fits: ALFA ROMEO 145, 146, 147, 155, 156, 166, GT, GTV, SPIDER FIAT BARCHETTA, BRAVA, BRAVO I, COUPE, CROMA, DOBLO 1.7-2.0 03.87-

View part

GLYCO Conrod bearings 71-4157/4 STD

Conrod bearing set (STD) fits: ALFA ROMEO 145, 146, 147, 155, 156, 166, GT, GTV, SPIDER FIAT BARCHETTA, BRAVA, BRAVO I, COUPE, CROMA, DOBLO, DOBLO FURGON/NADWOZIE WIELKOPRZESTRZENNE 1.7-2.0 03.87-

View part

GLYCO Conrod bearings 71-4158/4 0.25mm

Conrod bearing set (+0,25) fits: ALFA ROMEO 145, 146, 147, 155, 156 1.6/1.6LPG 10.94-03.10

View part

GLYCO Conrod bearings 71-4158/4 STD

Conrod bearing set (STD) fits: ALFA ROMEO 145, 146, 147, 155, 156 1.6/1.6LPG 10.94-03.10

View part

GLYCO Conrod bearings 71-4164/4 STD

Conrod bearing set (STD) fits: HONDA ACCORD V, ACCORD VI, CIVIC VI LAND ROVER FREELANDER I MG ZR, ZS ROVER 200 II, 25 I, 400 II, 45 I, 600 I, STREETWISE 2.0D 05.94-10.06

View part

GLYCO Conrod bearings 71-4167/4 0.25mm

Conrod bearing set (+0,25) fits: FORD TRANSIT, TRANSIT TOURNEO 2.5D 05.91-12.00

View part

GLYCO Conrod bearings 71-4167/4 0.50mm

Conrod bearing set (+0,50) fits: FORD TRANSIT, TRANSIT TOURNEO 2.5D 05.91-12.00

View part

GLYCO Conrod bearings 71-4167/4 STD

Conrod bearing set (STD) fits: FORD TRANSIT, TRANSIT TOURNEO 2.5D 05.91-12.00

View part

GLYCO Conrod bearings 71-4168/4 0.25mm

Conrod bearing set (+0,25) fits: ALFA ROMEO 155, 164, 75, 90, ALFETTA, GTV, SPIDER 1.6-2.0 03.71-09.98

View part

GLYCO Conrod bearings 71-4168/4 0.50mm

Conrod bearing set (+0,50) fits: ALFA ROMEO 155, 164, 75, 90, ALFETTA, GTV, SPIDER 1.6-2.0 03.71-09.98

View part

GLYCO Conrod bearings 71-4168/4 STD

Conrod bearing set (STD) fits: ALFA ROMEO 155, 164, 75, 90, ALFETTA, GTV, SPIDER 1.6-2.0 03.71-09.98

View part

GLYCO Conrod bearings 71-4170/4 0.25mm

Crankshaft bearings (+0,25) fits: RVI MIDLINER 3.6D 02.83-12.94

View part

GLYCO Conrod bearings 71-4170/4 STD

Crankshaft bearings (STD) fits: RVI MIDLINER 3.6D 02.83-12.94

View part

GLYCO Conrod bearings 71-4185/4 0.25mm

Conrod bearing set (+0,25) fits: IVECO DAILY I, DAILY II RVI B, MASCOTT, MESSENGER ALFA ROMEO AR 6, AR 8 FIAT 131, 132, ARGENTA, CAMPAGNOLA, CROMA, DUCATO LANCIA THEMA 2.4D/2.5D/2.8D 06.74-06.04

View part

GLYCO Conrod bearings 71-4185/4 0.50mm

Conrod bearing set (+0,50) fits: IVECO DAILY I, DAILY II RVI B, MASCOTT, MESSENGER ALFA ROMEO AR 6, AR 8 FIAT 131, 132, ARGENTA, CAMPAGNOLA, CROMA, DUCATO LANCIA THEMA 2.4D/2.5D/2.8D 06.74-06.04

View part

GLYCO Conrod bearings 71-4185/4 STD

Conrod bearing set (STD) fits: IVECO DAILY I, DAILY II RVI B, MASCOTT, MESSENGER ALFA ROMEO AR 6, AR 8 FIAT 131, 132, ARGENTA, CAMPAGNOLA, CROMA, DUCATO LANCIA THEMA 2.4D/2.5D/2.8D 06.74-06.04

View part

GLYCO Conrod bearings 71-4194/4 0.25mm

Conrod bearing set (+0,25) fits: HYUNDAI GALLOPER I, GALLOPER II, GRACE, H-1, H-1 / STAREX, H100, PORTER, TERRACAN KIA K2500, PREGIO MAZDA B-SERIE MITSUBISHI GALANT IV 2.3D/2.5D/2.6 09.80-

View part

GLYCO Conrod bearings 71-4194/4 0.75mm

Conrod bearing set (+0,75) fits: HYUNDAI GALLOPER I, GALLOPER II, GRACE, H-1, H-1 / STAREX, H100, PORTER, TERRACAN KIA K2500, PREGIO MAZDA B-SERIE MITSUBISHI GALANT IV 2.3D/2.5D/2.6 09.80-

View part

GLYCO Conrod bearings 71-4194/4 STD

Conrod bearing set (STD) fits: HYUNDAI GALLOPER I, GALLOPER II, GRACE, H-1, H-1 / STAREX, H100, PORTER, TERRACAN KIA K2500, PREGIO MAZDA B-SERIE MITSUBISHI GALANT IV 2.3D/2.5D/2.6 09.80-

View part

GLYCO Conrod bearings 71-4198/4 STD

Conrod bearing set (STD) fits: CITROEN C25, CX I, CX II PEUGEOT J5 2.5D 04.83-03.94

View part

GLYCO Conrod bearings 71-4204/4 STD

Conrod bearing set (STD) fits: NISSAN ALMERA CLASSIC, ALMERA II, CHERRY II, CHERRY III, PRAIRIE, PRIMERA, SUNNY I, SUNNY II, WINGROAD / AD 1.0-1.6LPG 08.78-

View part

GLYCO Conrod bearings 71-4205/4 STD

Conrod bearing set (STD) fits: NISSAN 200SX, BLUEBIRD, CABSTAR, DATSUN 140J, DATSUN 160J, NAVARA, PATHFINDER I, PICK UP, SERENA, SILVIA, TERRANO I, URVAN, VANETTE, VANETTE CARGO TCM FHG 1.4-2.4

View part

GLYCO Conrod bearings 71-4206 STD

Conrod bearing set (STD) fits: FORD MAVERICK NISSAN CABSTAR, PATROL III/1, PATROL III/2, PICK UP, URVAN, H 2.2D-3.3D

View part

GLYCO Conrod bearings 71-4209/5 STD

Conrod bearing set (STD) fits: FIAT BRAVO I, COUPE, MAREA LANCIA KAPPA, LYBRA, THESIS 2.0 10.94-07.09

View part

GLYCO Conrod bearings 71-4212 0.25mm

Conrod bearing (+0,25) fits: FIAT 1300, 1300 DT, 1300 S 2WD, 1300 S 4WD, 850 2WD, 850 4WD, 850 S 2WD, 850 S 4WD

View part

GLYCO Conrod bearings 71-4212 0.50mm

Conrod bearing (+0,50) fits: FIAT 1300, 1300 DT, 1300 S 2WD, 1300 S 4WD, 850 2WD, 850 4WD, 850 S 2WD, 850 S 4WD

View part

GLYCO Conrod bearings 71-4212 0.75mm

Conrod bearing (+0,75) fits: FIAT 1300, 1300 DT, 1300 S 2WD, 1300 S 4WD, 850 2WD, 850 4WD, 850 S 2WD, 850 S 4WD

View part

GLYCO Conrod bearings 71-4212 1.00mm

Conrod bearing (+1,00) fits: FIAT 1300, 1300 DT, 1300 S 2WD, 1300 S 4WD, 850 2WD, 850 4WD, 850 S 2WD, 850 S 4WD

View part

GLYCO Conrod bearings 71-4212 STD

Conrod bearing (STD) fits: FIAT 1300, 1300 DT, 1300 S 2WD, 1300 S 4WD, 850 2WD, 850 4WD, 850 S 2WD, 850 S 4WD

View part

GLYCO Conrod bearings 71-4214/6 0.25mm

Crankshaft bearings (+0,25) fits: SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, OMNIEXPRESS, P I 8.5D/9.0D/9.3D 01.85-

View part

GLYCO Conrod bearings 71-4214/6 STD

Crankshaft bearings (STD) fits: SCANIA 2, 3, 3 BUS, 4, 4 BUS, G I, OMNIEXPRESS, P I 8.5D/9.0D/9.3D 01.85-

View part

GLYCO Conrod bearings 71-4215/6 0.25mm

Conrod bearing set (+0,25) fits: IVECO EUROSTAR, EUROTECH MP, EUROTRAKKER, P/PA, P/PA-HAUBENFAHRZEUGE, TURBOSTAR, TURBOTECH ASTRA HD 7, HD 8 FIAT 300 8210.02.000-8210.42M.TCA 01.58-

View part

GLYCO Conrod bearings 71-4215/6 0.50mm

Conrod bearing set (+0,50) fits: IVECO EUROSTAR, EUROTECH MP, EUROTRAKKER, P/PA, P/PA-HAUBENFAHRZEUGE, TURBOSTAR, TURBOTECH ASTRA HD 7, HD 8 FIAT 300 8210.02.000-8210.42M.TCA 01.58-

View part

GLYCO Conrod bearings 71-4215/6 STD

Conrod bearing set (STD) fits: IVECO EUROSTAR, EUROTECH MP, EUROTRAKKER, P/PA, P/PA-HAUBENFAHRZEUGE, TURBOSTAR, TURBOTECH ASTRA HD 7, HD 8 FIAT 300 8210.02.000-8210.42M.TCA 01.58-

View part

GLYCO Conrod bearings 71-4218/6 0.25mm

Conrod bearing set (+0,25) fits: ALFA ROMEO 155, 156, 164, 166, 75, 90, GTV, RZ, SPIDER, SZ FIAT CROMA LANCIA KAPPA, THEMA, THESIS 2.0/2.5/3.0 11.80-07.09

View part

GLYCO Conrod bearings 71-4218/6 STD

Conrod bearing set (STD) fits: ALFA ROMEO 155, 156, 164, 166, 75, 90, GTV, RZ, SPIDER, SZ FIAT CROMA LANCIA KAPPA, THEMA, THESIS 2.0/2.5/3.0 11.80-07.09

View part

GLYCO Conrod bearings 71-4219/6 0.25mm

Conrod bearing (+0,25) fits: VOLVO F 16/470, F 16/485, F 16/500

View part

GLYCO Conrod bearings 71-4219/6 STD

Conrod bearing (STD) fits: VOLVO F 16/470, F 16/485, F 16/500

View part

GLYCO Conrod bearings 71-4221/6 0.25mm

Crankshaft bearings (+0,25) fits: FIAT 300 11.5D 01.58-12.71

View part

GLYCO Conrod bearings 71-4221/6 0.50mm

Crankshaft bearings (+0,50) fits: FIAT 300 11.5D 01.58-12.71

View part

GLYCO Conrod bearings 71-4221/6 STD

Crankshaft bearings (STD) fits: FIAT 300 11.5D 01.58-12.71

View part

GLYCO Conrod bearings 71-4222 STD

Conrod bearing (STD) fits: RVI C 210.19, CLR 220.19, G 210.16, G 210.16/T, G 210.19/T, G 230.11, G 230.13, G 230.15, G 230.15/T, G 230.16, G 230.17, G 230.17/T, G 230.19/T, TB 191/T, TB 231/T

View part

GLYCO Conrod bearings 71-4223 0.25mm

Conrod bearing set (+0,25)

View part

GLYCO Conrod bearings 71-4223 0.50mm

Crankshaft bearings (+0,50)

View part

GLYCO Conrod bearings 71-4223 STD

Crankshaft bearings (STD)

View part

GLYCO Conrod bearings 71-4227 0.25mm

Conrod bearing (+0,25) fits: FIAT 1580, 1580 DT, 1880, 1880 DT, 160-90, 160-90 DT, 180-90, 180-90 DT, 315, 315 R, FE28, FE28HD, FE28LC, FE28M, FE28MHD HITACHI DX175, DX195L, FR160

View part

GLYCO Conrod bearings 71-4227 0.50mm

Conrod bearing (+0,50) fits: FIAT 1580, 1580 DT, 1880, 1880 DT, 160-90, 160-90 DT, 180-90, 180-90 DT, 315, 315 R, FE28, FE28HD, FE28LC, FE28M, FE28MHD HITACHI DX175, DX195L, FR160

View part

GLYCO Conrod bearings 71-4227 0.75mm

Conrod bearing (+0,75) fits: FIAT 1580, 1580 DT, 1880, 1880 DT, 160-90, 160-90 DT, 180-90, 180-90 DT, 315, 315 R, FE28, FE28HD, FE28LC, FE28M, FE28MHD HITACHI DX175, DX195L, FR160

View part

Buying with Partios

Buying GLYCO parts through Partios

Are these genuine GLYCO parts?

Yes. Every GLYCO line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source GLYCO parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for GLYCO lines that aren't currently available.

Do you supply GLYCO parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on GLYCO parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a GLYCO order?

It depends on the line. Stocked GLYCO items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for GLYCO parts?

No. There's no minimum order value or quantity on a Partios trade account. Some GLYCO lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account