Partios Wholesale catalogue

Febi Bilstein Distributor | Parts

Engine mount (1,924) · Wheel suspension track control arm, front (1,875) · Brake disc (1,724) · Stabilizer link (1,407) · Brake pad set (1,366) · Tie rod end (1,236) · Stabilizer bar bushing (1,065) · Air filter (1,026) · 961 further part types (47,697)

59,553 current catalogue lines

About the FEBI BILSTEIN range

The Febi Bilstein range at Partios is broad rather than specialised. It has 59,553 lines spanning 969 part types across several vehicle systems. The largest groups are engine mount (1,924), wheel suspension track control arm, front (1,875), brake disc (1,724), stabilizer link (1,407) and brake pad set (1,366). They account for only 16% of the range, though. The other 49,788 lines sit across 963 further part types, which is what makes this a range to search rather than browse. That tail includes stabilizer bar bushing, air filter and gas spring. The range suits workshops, motor factors and exporters. A range this broad is normally used as a single-source catalogue, with buyers pulling several different systems onto one order. A range this size, with 59,553 lines, is normally bought on fitment coverage rather than on any one part number.

Catalogue products

FEBI BILSTEIN Tie rod end 48203

Tie rod end L/R fits: NISSAN PRAIRIE PRO 2.0/2.4 10.88-07.94

View part

FEBI BILSTEIN Tie rod end 48204

Tie rod end R fits: NISSAN JUKE, LEAF, NV200 / EVALIA, TIIDA 1.2-Electric 06.10-

View part

FEBI BILSTEIN Cross rod 48205

Cross rod (L-673mm) fits: NISSAN CABSTAR, CABSTAR E 10.98-12.13

View part

FEBI BILSTEIN Tie rod (with no end) 48208

Tie rod (with no end) L/R (length: 302mm) fits: SUBARU IMPREZA 1.6/2.0 12.00-06.09

View part

FEBI BILSTEIN Tie rod (with no end) 48209

Tie rod (with no end) L/R (length: 325mm) fits: SUBARU CROSSTREK, FORESTER, IMPREZA, LEGACY VI, LEVORG, OUTBACK, TRIBECA, WRX, XV 1.6-3.6 01.05-

View part

FEBI BILSTEIN Stabilizer link 48210

Stabilizer link front/rear L/R 140mm fits: LEXUS GS, LM, RC, RX TOYOTA ALPHARD / VELLFIRE, HIGHLANDER / KLUGER 2.0-5.0 12.08-

View part

FEBI BILSTEIN Stabilizer link 48211

Stabilizer link rear L/R 140mm fits: LEXUS GS, LM, RC, RX TOYOTA ALPHARD / VELLFIRE 2.0-5.0 04.08-

View part

FEBI BILSTEIN Stabilizer link 48212

Stabilizer link front L 136mm fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-

View part

FEBI BILSTEIN Stabilizer link 48213

Stabilizer link front R 136mm fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-

View part

FEBI BILSTEIN Stabilizer link 48214

Stabilizer link rear L/R 199mm fits: LEXUS GX TOYOTA LAND CRUISER, LAND CRUISER PRADO 2.8D-4.6 08.09-

View part

FEBI BILSTEIN Stabilizer link 48215

Stabilizer link front L/R 260mm fits: LEXUS ES TOYOTA AVALON, CAMRY 2.0-3.5 01.06-06.18

View part

FEBI BILSTEIN Stabilizer link repair kit 48216

Link stabilizer repair kit rear (10mm) fits: LEXUS LX TOYOTA LAND CRUISER 200 4.5D-5.7 08.07-

View part

FEBI BILSTEIN Stabilizer link 48219

Stabilizer link front L 85mm fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 11.06-

View part

FEBI BILSTEIN Stabilizer link 48220

Stabilizer link front R 85mm fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 11.06-

View part

FEBI BILSTEIN Front ball joint 48222

Axle ball joint L/R (bottom front) (cone diameter 17,7mm) fits: LEXUS CT TOYOTA CELICA, COROLLA, COROLLA VERSO, PRIUS 1.3-2.0D 08.99-

View part

FEBI BILSTEIN Front ball joint 48223

Axle ball joint L (bottom front) fits: LEXUS RX TOYOTA CAMRY, HIGHLANDER / KLUGER, SIENNA, VENZA 2.0-3.5H 01.06-

View part

FEBI BILSTEIN Front ball joint 48224

Axle ball joint R (bottom front) fits: LEXUS RX TOYOTA HIGHLANDER / KLUGER, SIENNA, VENZA 2.0-3.5H 05.07-

View part

FEBI BILSTEIN Front ball joint 48226

Axle ball joint L/R (bottom/outer front) fits: TOYOTA HIACE / COMMUTER V, HIACE IV, HIACE V 2.5D/2.7/3.0D 08.01-

View part

FEBI BILSTEIN Tie rod end 48230

Tie rod end L/R fits: TOYOTA CARINA IV, COROLLA, MR2 I 1.3-2.0D 05.83-06.90

View part

FEBI BILSTEIN Tie rod (with no end) 48235

Tie rod (with no end) L/R (length: 248mm) fits: TOYOTA CAMRY 2.4/2.4H/3.5 01.06-12.14

View part

FEBI BILSTEIN Tie rod (with no end) 48236

Tie rod (with no end) L/R (length: 297mm) fits: TOYOTA RAV 4 II 1.8-2.4 05.00-11.05

View part

FEBI BILSTEIN Tie rod end 48237

Tie rod end L fits: LEXUS LX TOYOTA LAND CRUISER 100 4.2D/4.7 01.98-03.08

View part

FEBI BILSTEIN Tie rod end 48238

Tie rod end R fits: LEXUS LX TOYOTA LAND CRUISER 100 4.2D/4.7 01.98-03.08

View part

FEBI BILSTEIN Tie rod (with no end) 48239

Tie rod (with no end) L/R (length: 365,5mm) fits: TOYOTA PRIUS 1.5H 09.00-12.03

View part

FEBI BILSTEIN Tie rod (with no end) 48240

Tie rod (with no end) L/R (length: 117mm, with counter-nut) fits: TOYOTA IQ 1.0/1.33/1.4D 01.09-12.15

View part

FEBI BILSTEIN Steering knuckle repair kit 48241

King pin set rear fits: TOYOTA DYNA 150 2.8D/3.0D 08.88-07.01

View part

FEBI BILSTEIN Steering knuckle repair kit 48242

King pin set fits: TOYOTA DYNA 150, DYNA 200 3.0D/3.4D/4.1D 09.88-07.01

View part

FEBI BILSTEIN Tie rod end 48243

Tie rod end L fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 09.06-

View part

FEBI BILSTEIN Tie rod end 48244

Tie rod end R fits: TOYOTA SEQUOIA, TUNDRA 4.0-5.7ALK 09.06-

View part

FEBI BILSTEIN Tie rod end 48245

Tie rod end L/R fits: TOYOTA HIACE / COMMUTER V, HIACE IV, HIACE V 2.4-3.0D 08.89-

View part

FEBI BILSTEIN Steering knuckle repair kit 48247

King pin set fits: ISUZU N SERIES

View part

FEBI BILSTEIN Steering knuckle repair kit 48248

King pin set front (length 187,5mm) fits: ISUZU N V 3.0-5.2D 09.98-

View part

FEBI BILSTEIN Driver's cab tilt servomotor/pump 48271

Driver’s cab tilt pump (with RHD) fits: SCANIA G I, P I, R I, T 01.03-09.22

View part

FEBI BILSTEIN Drive axle seal/leak stopper 48272

Drive axle seal/leak stopper L/R (34,9x54,9x8/8) fits: SMART FORFOUR, FORTWO 0.8D-1.5D 01.04-

View part

FEBI BILSTEIN Air filter 48273

Air filter (cartridge) fits: SCANIA 4, G I, P I, R I, T DC09.108-OC9.G05 05.95-09.22

View part

FEBI BILSTEIN Stepless clamps 48274

Stepless clamp, width 9,5 mm, max diam 20mm, diameter 20 mm

View part

FEBI BILSTEIN Wheel bearing kit 48275

Wheel bearing kit rear fits: DAF LF, LF 45, LF 55, XB, XBC IVECO EUROCARGO I-III, EUROCARGO IV, EUROCARGO V, EUROMOVER, EUROSTAR, EUROTECH MP, STRALIS I, STRALIS II 8210.42L(TCA)-PX-7239 01.92-

View part

FEBI BILSTEIN Wheel bearing 48276

Wheel bearing rear fits: IVECO EUROTRAKKER, DAILY II, DAILY III, DAILY IV, DAILY V, DAILY VI RVI D NISSAN NT500 8140.23-ZD30 01.89-

View part

FEBI BILSTEIN Spring clamp 48277

Spring clamp, width 12 mm, max diam 17mm

View part

FEBI BILSTEIN Spring clamp 48278

Spring clamp, width 12 mm, max diam 20mm

View part

FEBI BILSTEIN Spring clamp 48279

Spring clamp, width 12 mm, max diam 26mm

View part

FEBI BILSTEIN Spring clamp 48280

Spring clamp, width 12 mm, max diam 29mm

View part

FEBI BILSTEIN Timing belt 48281

Timing belt fits: AUDI A1, A3, A4 B9, A5, Q2, Q3 CUPRA FORMENTOR, LEON, LEON SPORTSTOURER SEAT ALHAMBRA, ATECA, IBIZA IV, IBIZA IV SC, IBIZA IV ST, LEON, LEON SC, LEON SPORTSTOURER 1.0-1.6 04.11-

View part

FEBI BILSTEIN Timing belt 48282

Timing belt fits: AUDI A1, A3, A4 ALLROAD B8, A4 ALLROAD B9, A4 B8, A4 B9, A5, A6 C7, A6 C8, A7, A8 D4, Q2, Q3, Q5, Q7, Q8, TT CUPRA ATECA, FORMENTOR, LEON, LEON SPORTSTOURER 1.8-2.0H 10.07-

View part

FEBI BILSTEIN Oil pump drive chain 48284

Oil pump drive chain (number of links: 60) fits: HONDA ACCORD VIII, CR-V III, CR-V IV, CR-V V, CROSSROAD 2.0/2.0H 10.06-

View part

FEBI BILSTEIN Timing chain 48285

Timing chain (number of links: 158) fits: TOYOTA COROLLA, YARIS 1.3 08.99-12.12

View part

FEBI BILSTEIN Timing chain 48286

Timing chain (number of links: 120) fits: TOYOTA BB I, ECHO, IST, PORTE I, WILL CYPHA I, YARIS, YARIS / VIOS, YARIS VERSO 1.3 08.99-01.17

View part

FEBI BILSTEIN Timing chain 48287

Timing chain (number of links: 136) fits: HONDA ACCORD VIII, CIVIC IX, CIVIC VIII, CIVIC X, CR-V III, CR-V IV, FR-V, HR-V 1.4-2.0 09.05-

View part

Buying with Partios

Buying FEBI BILSTEIN parts through Partios

Are these genuine FEBI BILSTEIN parts?

Yes. Every FEBI BILSTEIN line here is sourced through Partios's ISO 9001:2015-certified European distribution network.

Can you source FEBI BILSTEIN parts that aren't showing in stock?

Yes. Partios runs a prepayment-only, manufacturer-order model, so we can place a manufacturer order for FEBI BILSTEIN lines that aren't currently available.

Do you supply FEBI BILSTEIN parts for export?

Yes. We serve motor factors, exporters and resellers. Export orders are handled the same way as UK trade orders.

How do I get trade pricing on FEBI BILSTEIN parts?

Apply for a Partios Wholesale trade account to see trade pricing and availability.

What lead time should I expect on a FEBI BILSTEIN order?

It depends on the line. Stocked FEBI BILSTEIN items are dispatched within 24 hours of payment for parcel orders, or up to 48 hours for pallet orders depending on size. For lines placed as a manufacturer order, we confirm the lead time with the manufacturer before the order goes in, so you know the timescale before you pay.

Is there a minimum order quantity for FEBI BILSTEIN parts?

No. There's no minimum order value or quantity on a Partios trade account. Some FEBI BILSTEIN lines are supplied in manufacturer pack sizes, which are shown on the product listing.

No registration needed

See what we can source

Upload your parts list and we’ll match it against the full catalogue. Add up to 50 rows, with no account needed.

Try the Parts Finder

Ready to see trade pricing and availability? Apply for a Partios Wholesale account.

Apply for a trade account